Cameo ThunderWash 600 UV Handleiding

Cameo Verlichting ThunderWash 600 UV

Lees hieronder de 📖 handleiding in het Nederlandse voor Cameo ThunderWash 600 UV (46 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/46
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D´UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D´USO
THUNDERWASH 600 UV
LED UV WASHLIGHT
CLTW600UV
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
PREVENTIVE MEASURES 3-4
INTRODUCTION 4
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 5
OPERATION 5-7
INSTALLATION AND MOUNTING 7
DMX TECHNOLOGY 8
TECHNICAL DATA 9
MANUFACTURER’S DECLARATIONS 9
DMX CONTROL 45
DEUTSCH
SICHERHEITSHINWEISE 10-11
EINFÜHRUNG 11
ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 12
BEDIENUNG 12-14
AUFSTELLUNG UND MONTAGE 14
DMX TECHNIK 15
TECHNISCHE DATEN 16
HERSTELLERERKLÄRUNGEN 16
DMX STEUERUNG 45
FRANCAIS
MESURES PRÉVENTIVES 17-18
INTRODUCTION 18
RACCORDEMENTS, ÉLÉMENTS DE COMMANDE ET D’AFFICHAGE
19
MODE D’EMPLOI 19-21
INSTALLATION ET MONTAGE 21
TECHNOLOGIE DMX 22
CARACTÉRISTIQUES TECHNIQUES 23
DÉCLARATIONS DU FABRICANT 23
PILOTAGE DMX 45
ESPAÑOL
MEDIDAS DE SEGURIDAD 24-25
INTRODUCCIÓN 25
CONEXIONES, ELEMENTOS DE MANEJO Y ELEMENTOS
DE VISUALIZACIÓN 26
MANEJO 26-28
INSTALACIÓN Y MONTAJE 28
TECNOLOGÍA DMX 29
DATOS TÉCNICOS 30
DECLARACIONES DEL FABRICANTE 30
CONTROL DMX 45
POLSKI
ŚRODKI OSTROŻNOŚCI 31-32
WPROWADZENIE 32
GNIAZDA, ELEMENTY OBSŁUGI I WSKAŹNIKI 33
OBSŁUGA 33-35
USTAWIANIE I MONTAŻ 35
TECHNIKA DMX 36
DANE TECHNICZNE 37
OŚWIADCZENIA PRODUCENTA 37
STEROWANIE DMX 45
ITALIANO
MISURE PRECAUZIONALI 38-39
INTRODUZIONE 39
CONNESSIONI, ELEMENTI DI COMANDO E VISUALIZZAZIONE 40
UTILIZZO 40-42
INSTALLAZIONE E MONTAGGIO 42
TECNOLOGIA DMX 43
DATI TECNICI 44
DICHIARAZIONI DEL PRODUTTORE 44
CONTROLLO DMX 45
3
DMX DEUTSCHFRANCAISESPAÑOL ENGLISHITALIANO POLSKI
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. Please read this User‘s Manual carefully, so that you can begin making
optimum use of your Cameo Light product quickly. Learn more about Cameo Light on our website WWW. .COM.CAMEOLIGHT
PREVENTIVE MEASURES
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly
installed and secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is
always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. This appliance is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of water (does not apply
to special outdoor equipment - in this case, observe the special instructions noted below). Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or
drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in
anot her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired
by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never deactivate the protective ground of a power cord.
23. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
24. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.
25. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power
adapter and the equipment connector.
26. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the
equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter
with wet hands.
27. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of
the equipment.
28. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service centre.
29. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
30. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-
moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
31. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
32. The device must only be installed in a voltage-free condition (disconnect the mains plug from the mains).
33. Dust and other debris inside the unit may cause damage. The unit should be regularly serviced or cleaned (no guarantee) depending on
ambient conditions (dust etc., nicotine, fog) by qualified personnel to prevent overheating and malfunction.
34. Please keep a distance of at least 0.5 m to any combustible materials.
35. Power cables to power multiple devices must have a cross-section of at least 1.5 mm². Within the EU, the cables must correspond to
H05VV-F, or similar. Suitable cables are offered by Adam Hall. With these cables, you can connect multiple devices via the power OUT
connection to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not
exceed the specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.

Product specificaties

Merk: Cameo
Categorie: Verlichting
Model: ThunderWash 600 UV

Heb je hulp nodig?

Als je hulp nodig hebt met Cameo ThunderWash 600 UV stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Verlichting Cameo

Cameo

Cameo ZENIT W300 Handleiding

9 Juli 2023
Cameo

Cameo ZENIT W600 Handleiding

8 Juli 2023
Cameo

Cameo ZENIT W600 TW Handleiding

6 Juli 2023
Cameo

Cameo ZENIT Z120 G2 Handleiding

5 Juli 2023
Cameo

Cameo Q SPOT 15 RGBW Handleiding

28 Juni 2023
Cameo

Cameo CLSuperfly HP Derby Handleiding

16 Juni 2023
Cameo

Cameo ThunderWash 600 UV Handleiding

15 Juni 2023
Cameo

Cameo CLMPARFOOTPLUS Handleiding

11 Juni 2023
Cameo

Cameo UV Bar 200 IR Handleiding

9 Juni 2023
Cameo

Cameo TRIBAR 400 IR Handleiding

9 Juni 2023

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Aveo Engineering

Aveo Engineering Powerburst Daylite Handleiding

27 April 2024
Aveo Engineering

Aveo Engineering Redbaron XP Galactica Handleiding

27 April 2024
Aveo Engineering

Aveo Engineering Maxx Atlas Handleiding

27 April 2024
Aveo Engineering

Aveo Engineering Ultra Embedded Handleiding

27 April 2024
GVM

GVM -PRO-SD300C Handleiding

25 April 2024
GVM

GVM -PD60B Handleiding

25 April 2024
Lucide

Lucide Brackx-LED Handleiding

23 April 2024
Lucide

Lucide Dica LED Handleiding

23 April 2024
Lucide

Lucide Yazoo Led Handleiding

23 April 2024
Lucide

Lucide Dyvor-LED Handleiding

23 April 2024