Brother NX200QE Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Brother NX200QE (111 pagina's) in de categorie Naaimachine. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/111
Cover A
Enclosed Accessories
After opening the box, check that the following accessories are enclosed. If any item is missing or damaged,
contact your retailer.
Accessories
The following items should also be enclosed in the box.
1. 2. 3. 4. 5. 6. 7. 8. 9.
10.* 11. 12. 13. 14. 15. 16. 17. 18.
19. 20. 21. 22. 23. 24.
* 75/11 2 needles
90/14 2 needles
90/14 2 needles: Ball point needle (gold colored)
No. Part Name Part Code No. Part Name Part Code
U.S.A. Others U.S.A. Others
1 Buttonhole foot “A XC2691-051 13 Eyelet punch 135793-001
2 Overcasting foot “G” XC3098-051 14 Screwdriver (large) X55467-051
3 Monogramming foot “N X53840-351 15 Screwdriver (small) X55468-051
4 Zipper foot “I” X59370-051 16 Spool cap (large) 130012-054
5 Zigzag foot “J” (on machine) XC3021-051 17 Spool cap (medium)(2) X55260-153
6 Blind stitch foot “R” X56409-051 18 Spool cap (small) 130013-154
7 Button fitting foot “M” 130489-001 19 Extra spool pin (horizontal) XC4654-051
8 Seam ripper X54243-001 20 Spool net XA5523-050
9 Bobbin (4) SA156 XA5539-151 21 Foot controller XC1154-051
10 Needle set X58358-051 22 Operation manual XE1140-001
11 Twin needle X59296-051 23 Quick reference guide XC4546-151
12 Cleaning brush X59476-051 24 Hard case XC2360-152
Note
(For U.S.A. only)
Foot controller: Model N5V
This foot controller can be used on this
machine model NX-200/PC-210.
The screw of the presser foot holder is
available through your authorized dealer.
(Part code: XA4813-051)
The organized accessory tray is available
through your authorized dealer.
(Part code: XC4489-051)
Cover B
Names of Machine Parts and Their Functions
The names of the various parts of the sewing machine and their functions are described below. Before using the
sewing machine, carefully read these descriptions to learn the names of the machine parts.
Front view
1 2Thread guide plate / Thread guide cover
Pass the thread around the thread guide plate when
threading the upper thread.
3Spool pin
Place the spool on the spool pin.
4Thread guide for bobbin winding
Pass the thread around this thread guide when winding
the bobbin thread.
5Upper cover
Open the upper cover to place the spool of thread on
the spool pin.
6Bobbin winder
Use the bobbin winder when winding the bobbin.
7Operation panel
Select a stitch from those that appear in the operation
panel. (page Cover E)
8Sewing speed controller
Use the sewing speed controller to adjust the sewing
speed.
9Operation buttons
Use the operation buttons to start the sewing machine
and raise and lower the needle. (page Cover D)
0Flat bed attachment with accessory compartment
Store presser feet and bobbins in the accessory
compartment of the flat bed attachment. When sewing
cylindrical pieces, remove the flat bed attachment.
AThread cutter
Pass the threads through the thread cutter to cut them.
BNeedle threader lever
Use the needle threader to thread the needle.
CThread tension dial
Use the thread tension dial to adjust the tension of the
upper thread.
5
3
4
6
2
1
7
9
8
B
C
A
0


Product specificaties

Merk: Brother
Categorie: Naaimachine
Model: NX200QE

Heb je hulp nodig?

Als je hulp nodig hebt met Brother NX200QE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Naaimachine Brother

Handleiding Naaimachine

Nieuwste handleidingen voor Naaimachine