Brother MFC-J6740DW Handleiding

Brother Printer MFC-J6740DW

Lees hieronder de 📖 handleiding in het Nederlandse voor Brother MFC-J6740DW (2 pagina's) in de categorie Printer. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Quick Setup Guide

Read the Product Safety Guide Quick Setup Guide ﬁrst, then read this for the correct installation procedure.

D01YPU001-00

OCE/ASA/SAF/GLF

Version 0

1Unpack the machine and check the components

Remove the protective tape or film covering the machine and the supplies. The components included in the box may differ depending on your country.

MFC-J3540DW / MFC-J3940DW / MFC-J6540DW / MFC-J6555DW

MFC-J6740DW / MFC-J6940DW / MFC-J6955DW / MFC-J6957DW

NOTE

• Save all packing materials and the box in case you must ship your machine.

• You must purchase the correct interface cable for the interface you want to use.

USB cable

Use a USB 2.0 cable (Type A/B) that is no more than 5 metres long.

Ethernet (Network) cable

Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or

100BASE-TX Fast Ethernet Network.

NOTE

You can adjust the control panel

angle to read the LCD more easily.

NOTE

The first time you install a set

of ink cartridges the machine

will use an amount of ink to fill

the ink delivery tubes for high

quality printouts. This process

will only happen once.

Open the ink cartridge cover.

MFC-J3540DW / MFC-J3940DW / MFC-J6540DW / MFC-J6740DW /

MFC-J6940DW:

Remove the orange protective part from the machine. Follow

the LCD instructions to store the orange protective part inside

the machine. If you must transport the machine, remove the ink

cartridges and replace this part.

The latest manuals are available at the Brother support website:

support.brother.com/manuals

Video setup instructions:

support.brother.com/videos

Pull the paper tray completely

out of the machine as shown

by the arrow.

Fan the paper well. Load the paper in the tray

and adjust the paper guides.

Slowly push the paper tray

completely into the machine.

Pull out the paper support until

it locks into place.

Quickly shake just the

black ink cartridge

horizontally 15 times as

shown, before inserting

it into the machine.

Follow the LCD instructions

to install the ink cartridges.

Close the ink cartridge

cover. The machine will

prepare the ink tube

system for printing.

Follow the LCD instructions to set

the date and time.

After setting the date and time, you

can set the Brother LCD Message

defaults.

Follow the LCD instructions,

and then press . [Start]

The machine prints the Print

Quality Check Sheet.

Follow the LCD instructions and

check the quality of the four

colour blocks on the sheet, and

then start the cleaning procedure

if required.

Follow the LCD instructions

to print the Adjustment

Sheet. The black circle mark

is located in the upper right

corner of the sheet.

Place the Adjustment Sheet

face down on the scanner

glass. Make sure the black

circle is in the upper left corner

of the scanner glass.

Follow the LCD instructions

and complete adjusting the

alignment.

When finished, remove the

Adjustment Sheet from the

scanner glass.

After finishing the machine setup, you can change the paper type or size. For more information

about paper handling, see the Online User’s Guide at support.brother.com/manuals.

2Load plain A4 paper

5Install the inbox ink cartridges

3Connect the power cord

7Check the print quality 8Adjust the print alignment (recommended)

To adjust the print alignment before using your machine, press .[Start]

6Set the date and

time

• Most of the machine illustrations in this show the MFC-J6940DW.Quick Setup Guide

• The images in this guide are for illustration purposes only and may differ from the

actual products.

Do not exceed

this mark ( ).bbb

4Select your country or language

After turning the machine on, you may need to set your country or language (depending on

your machine). If required, follow the LCD instructions.

OK Poor

Can’t Connect? Check the following:

Wireless network

Wired network

USB connection

Restart your wireless access point/

router (if possible). If still not successful, go to 13 .

Disconnect the cable. If still not successful, visit support.brother.com

for FAQs and Troubleshooting.

Restart your machine and

computer, and then go to 12 .

Follow the LCD instructions to configure the machine settings.

• Configure the tray settings and check the paper orientation information (not

available on all models).

• Check the software installation information.

1. Press > > [Settings] [All Settings] [Initial Setup]

> [Local Language].

2. Press your language.

3. Press .

Visit setup.brother.com to download and install

Brother software.

Follow the on-screen instructions and prompts.

NOTE

For Wired Network Connection and USB Connection,

locate the correct port (based on the cable you are using)

inside the machine as shown.

Setup Finished

You can now print and scan using your machine.

To check for the latest firmware, visit

support.brother.com/up7.

Find your SSID (Network Name) and Network Key

(Password) on your wireless access point/router

and write them in the table provided below.

SSID (Network Name)

Network Key (Password)

Go to your machine,

and press

[Find Wi-Fi Network] >

[Yes].

Go to 12 to install software.

SSID: XXXXXXX

Network Key: XXXX

If you cannot find this information, ask your network

administrator or wireless access point/router

manufacturer.

If setup is not successful, restart

your Brother machine and your

wireless access point/router, and

repeat 13 .

Important Notice for Network Security:

The default password to manage this machine’s

settings is located on the back of the machine

and marked “ ”. We recommend immediately Pwd

changing the default password to protect your

machine from unauthorised access.

For detailed machine information and product specifications, see the Online User's Guide at support.brother.com/manuals.

13 Manual wireless setup

If the wireless setup is not successful, try to set up the connection manually.

12 Connect your computer or mobile device to your machine

Follow these steps to complete the setup using one of the connection types available on your machine.

11 Connect the telephone line cord

If you are not using your machine as a fax, go to 12 . For more information on using the fax feature, see the Online User’s Guide.

10 Select your language (if needed)

9Machine settings

setup.brother.com

Select the SSID (Network

Name) for your access point/

router and enter the Network Key

(Password).

When the wireless setup is

successful, the LCD displays

[Connected].

Lift the scanner cover. Close the scanner cover.

Connect the telephone line cord. Use the socket

marked LINE and guide the cord out the back of the

machine.

D01YPU001-00

NOTE

For Windows only, CD installation is also available (for

some countries).

(Example for Australia)

Product specificaties

Merk:	Brother
Categorie:	Printer
Model:	MFC-J6740DW
Soort bediening:	Touch
Kleur van het product:	Black, White
Ingebouwd display:	Ja
Gewicht:	23400 g
Breedte:	575 mm
Diepte:	477 mm
Hoogte:	374.5 mm
Wi-Fi-standaarden:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
USB-poort:	Ja
Ethernet LAN:	Ja
Markt positionering:	Bedrijf
Stroomverbruik (indien uit):	0.03 W
Intern geheugen:	256 MB
Ethernet LAN, data-overdrachtsnelheden:	10, 100 Mbit/s
Ondersteunde beveiligingsalgoritmen:	64-bit WEP, 128-bit WEP, WPA-AES, WPA-PSK, WPA-TKIP, WPA2-AES, WPA2-PSK, WPA2-TKIP, WPA3-SAE
Ondersteunt Windows:	Windows 10, Windows 7, Windows 8, Windows 8.1
Maximale resolutie:	1200 x 4800 DPI
Printkleuren:	Black, Cyan, Magenta, Yellow
Papierlade mediatypen:	Envelopes, Plain paper, Postcard, Recycled paper
Printtechnologie:	Inkjet
Printsnelheid (zwart, standaardkwaliteit, A4/US Letter):	- ppm
Printen:	Afdrukken in kleur
Duplex printen:	Ja
Gebruiksindicatie (maximaal):	- pagina's per maand
Kopieën vergroten/verkleinen:	25 - 400 procent
Maximale kopieerresolutie:	600 x 600 DPI
Kopiëren:	Kopiëren in kleur
Scannen:	Scannen in kleur
Soort scanner:	ADF-scanner
Scantechnologie:	CIS
Optische scanresolutie:	600 x 600 DPI
Modemsnelheid:	33.6 Kbit/s
Faxgeheugen:	150 pagina's
Faxen:	Faxen in kleur
Totale invoercapaciteit:	250 vel
Totale uitvoercapaciteit:	100 vel
Maximale ISO A-series papierformaat:	A3
ISO A-series afmetingen (A0...A9):	A3, A4, A5, A6
Slaapstand:	0.9 W
Stroomverbruik (gereed):	5 W
Mobiele printing technologieën:	Apple AirPrint, Mopria Print Service
Watermerk printen:	Ja
Tijdsduur tot de eerste pagina (zwart, normaal):	4.4 s
Tijdsduur tot de eerste pagina (kleur, normaal):	4.6 s
Totaal aantal invoerladen:	1
Papierlade mediagewicht:	64 - 220 g/m²
Afmetingen enveloppen:	C5, Com-10, DL
Non-ISO print papierafmetingen:	Legal (media size), Letter (media size)
Maximaal aantal kopieën:	999 kopieën
Aanbevolen gebruiksindicatie:	250 - 2500 pagina's per maand
Kleurenscherm:	Ja
Kleurdiepte invoer:	48 Bit
Gemiddeld stroomverbruik tijdens Kopiëren:	29 W
Auto reductie:	Ja
Functie voor afdrukken boekjes:	Ja
Scan naar:	E-mail Server, File
Automatische documentinvoer (ADF):	Ja
Capaciteit automatische documentinvoer:	50 vel
Uitvoer grijsschaaldiepte:	8 Bit
Wifi:	Ja
AC-ingangsspanning:	220 - 240 V
AC-ingangsfrequentie:	50/60 Hz
Bedrijfstemperatuur (T-T):	10 - 35 °C
Duplex functies:	Printen
Kleurdiepte uitvoer:	24 Bit
N-in-1 copy function (N=):	2, 4
Afdruksnelheid (ISO/IEC 24734) zwart-wit:	28 ipm
Afdruksnelheid (ISO/IEC 24734) kleur:	28 ipm
N-in-1 kopieerfunctie:	Ja
ECM (Foutcorrectie):	Ja
Grijswaardendiepte-input:	16 Bit