Bretford EC4X-P5 Handleiding

Bretford Multimedia kar EC4X-P5

Lees hieronder de 📖 handleiding in het Nederlandse voor Bretford EC4X-P5 (6 pagina's) in de categorie Multimedia kar. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

Assembly Instructions

EC4X

COMPUTER WORKSTATION

WITH MOUSE PAD

HARDWARE LIST

Qty Part# Description

2 010-1863 Top & Bottom Shelves

1 010-4511 Slide Out Shelf

1 010-4512 Slide Out Shelf w/Cut Out

4 010-4505 Shelf Support Brackets

1 010-2658 Mouse Pad Mounting Bracket

1 022-1397 Right Front Leg Assembly

1 022-1398 Left Front Leg Assembly

1 022-1399 Right Rear Leg Assembly

1 022-1400 Left Rear leg Assembly

1 022-1825 Mouse Pad Assembly

2 015-0002 4" Casters w/o Lock

2 015-0003 4" Casters w/ Lock

2 030-1191 14" Full Extension Slide

Ref Qty Part# Description

AA 16 030-0300 5/8" Square Head Bolts

BB 16 030-0002 5/16-18 Hex Serrated Nuts

CC 16 030-0304 1/4-20 x 5/8" Combo Screws

DD 2 030-0428 2 11/32" Washers

EE 1 030-0427 Nylon Washer

FF 1 030-0306 1" x 21/64" Washer

GG 1 030-0421 5/16-18 Hex Lock Nut

HH 2 030-0325 1/4-20 x 1/2" Combo Screws

JJ 16 030-1228 8-32 x 1/4" Combo Truss Screws

KK 8 030-1203 #*-32 Acorn Nuts

LL 2 010-2841PB Mouse Pad Brackets

MM 8 02236 8-32 GFlange Whiz Lock Nuts

NN 1 010-3487 Spacer Shim

1 010-1106 Hex Wrench

PARTS LIST

TOOLS REQUIRED

Hex Wrench (Provided)

Phillips Screwdriver

Rubber Mallet

STEP 1

Lay the front legs on a carpeted surface (they are stamped "LF" and "RF") with the holes

facing up and the brackets facing up and in as shown in Figure 1. Slide the top and bottom

shelves onto the legs so that the brackets are inside the shelves (Figure 2).

FIGURE 2

FIGURE 1



STEP 3

Secure shelves and legs together with bolts (AA) and nuts

(BB) in each corner as shown.

STEP 4

Insert each caster into the bottom of each leg. If caster does not insert

easily, use a rubber mallet to tap caster in place. Once casters are

SECURELY in place, stand unit upright.

STEP 2

Slide the rear legs onto the shelves so that the

brackets are inside the shelves.

AA BB

Determine which side you want your shelf to pull out from. Use FIGURE 3 as reference.

Attach the shelf support brackets to both set of holes between the legs with screws (CC) as

shown in FIGURE 4. Then separate each slide and attach the outer section to the inside of

each shelf support bracket with screws (JJ) and nuts (KK) as shown in FIGURE 5. NOTE:

Attach rear screw and nut first.

STEP 5

FIGURE 4

FIGURE 5

To access the correct

holes, slide inner piece

out slightly. Attach rear screw

& nut FIRST.

SHELF SUPPORT BRACKET

These holes need to face the edge

you want the shelf to slide out on.

FIGURE 3

CC JJ KK

Product specificaties

Merk:	Bretford
Categorie:	Multimedia kar
Model:	EC4X-P5
Kleur van het product:	Beige
Gewicht:	24948 g
Breedte:	609.6 mm
Diepte:	457.2 mm
Hoogte:	863.6 mm
Soort:	Multimediawagentje
Materiaal:	Staal
Keyboardlade:	Ja