Bretford EC4-M4 Handleiding

Bretford Multimedia kar EC4-M4

Lees hieronder de 📖 handleiding in het Nederlandse voor Bretford EC4-M4 (4 pagina's) in de categorie Multimedia kar. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Assembly Instructions

EC4

MOBILE COMPUTER WORKSTATION

Qty Part# Description

2 010-1863 Top & Bottom Shelves

1 010-4511 Slide Out Shelf

1 010-4512 Slide Out Shelf w/Cut Out

4 010-4505 Shelf Support Brackets

1 022-1397 Right Front Leg

1 022-1398 Left Front Leg

1 022-1399 Right Rear Leg

1 022-1400 Left Rear leg

2 015-0002 4" Casters w/o Lock

2 015-0003 4" Casters w/ Lock

1 030-1191 14" Full Extension Slide

PARTS LIST HARDWARE LIST

Lay the front legs on a carpeted surface (they are stamped "LF" and "RF") with the holes

facing up and the bracket facing up and in as shown in Figure 1. Slide the top and bottom

shelves onto the legs so that the brackets are inside the shelves (Figure 2).

STEP 1

TOOLS REQUIRED

Hex Wrench (Provided)

Phillips Screwdriver

Rubber Mallet

FIGURE 1

FIGURE 2



Ref Qty Part# Description

AA 16 030-0300-21T 5/8" Square Head Bolts

BB 16 030-0002 5/16-18 Hex Serrated Nuts

CC 16 030-0304 1/4-20 x 5/8" Combo Screws

DD 16 030-1228 8-32 x 1/4" Combo Truss Screws

EE 8 030-1203 #8-32 Acorn Nuts

FF 8 02236 8-32 Flange Whiz Lock Nuts

1 010-1106 Hex Wrench

STEP 2

Slide the rear legs onto the shelves so that the

brackets are inside the shelves.

STEP 3

Secure shelves and legs together with bolts

(AA) and nuts (BB) in each corner as shown.

AA BB

STEP 4

Insert each caster into the bottom of each leg. If

caster does not insert easily, use a rubber mallet to

tap caster in place. Once casters are SECURELY in

place, stand unit upright.

Determine which side you want your shelf to pull out from. Use FIGURE 3 as reference.

Attach the shelf support brackets to both set of holes between the legs with screws (CC) as

shown in FIGURE 4. Then separate each slide and attach the outer section to the inside of

each shelf support bracket with screws (DD) and nuts (EE) as shown in FIGURE 5. NOTE:

Attach rear screw and nut first.

STEP 5

FIGURE 4

FIGURE 5

To access the correct

holes, slide inner piece

out slightly. Attach rear screw

& nut FIRST.

SHELF SUPPORT BRACKET

These holes need to face the edge

you want the shelf to slide out on.

FIGURE 3

CC DD EE

Product specificaties

Merk:	Bretford
Categorie:	Multimedia kar
Model:	EC4-M4
Kleur van het product:	Beige
Breedte:	609.6 mm
Diepte:	457.2 mm
Hoogte:	838.2 mm
Soort:	Multimediawagentje
Aantal schappen:	2 schappen
Materiaal:	Staal
Keyboardlade:	Ja