Brady DSP-5 Handleiding
Brady
Niet gecategoriseerd
DSP-5
Bekijk gratis de handleiding van Brady DSP-5 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.2 sterren uit 3.5 reviews. Heb je een vraag over Brady DSP-5 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
05/01
instructions
DSP-5
Brady Worldwide Identification Solutions
6555 West Good Hope Road
P.O. Box 2131
Milwaukee, WI 53201-2131
Phone: (800) 537-8791
Fax: (800) 292-2289
www.bradyid.com
7
2
CONTENTS
Read this user’s manual before use to ensure proper operation. Keep the manual on
hand for reference in case there is a problem.
Warranty Information .....................2
Features .........................................3
Notes ............................................3
Repair Policy ..................................3
Specifications .................................3
Set-up ............................................4
Operation/Adjustments ...................5
Maintenance ..................................6
Legend ...........................................6
Exploded View ...............................7
Brady Corporation warrants all parts on DSP series label dispensers against defects
in design, materials and workmanship for a period of 180 days. Labor to replace
defective parts will be performed at no charge for the first 90 days after date of
purchase. Warranty does not cover transportation costs.
Our sole obligation under this warranty is limited to repair, replacement or credit of
the purchase price, at our option, for the machines listed above, which do not
perform properly the function for which they were designed.
Warranty repair is contingent upon our examination and determination that alleged
defects have not been caused by misuse, abuse, improper installation or application,
repair, alteration, accident or neglect in use, storage, transportation or handling.
The above warranty and remedy constitutes Brady Corporation’s sole liability
hereunder and are in lieu and exclusive of all other warranties and remedies
expressed, implied, or statutory, including, but not limited to, those of merchantability
and fitness for a particular purpose.
WARRANTY POLICY FOR DSP SERIES LABEL DISPENSERS
6-MOTOR
6A-Motor/Main Plate screw(4ea)
6B-Grounding nut(1ea)
2-REEL HOLDER ARM
2A-Arm/Main Plate screw(1ea)
2B-Hex wrench
1-COVER
1A-Cover/Base screw (4ea)
1B-Cover/Main Plate screw(2ea)
23-SAFETY SWITCH
23A-Switch/Base screw(2ea)
23B-Nut(2ea)
21-POWER INLET
21A-Fuse(1ea)
20-RELAY
20A-Relay/Base screw(2ea)
20B-Nut(2ea)
18-POWER SWITCH
3-REEL HANGER BAR
3A-Bar/Arm screw(1ea)
5-3" SPOOL (2 each)
7-SQUARE LOCK ROD 8-TAKEUP HUB
8A-Hub/Motor set screw(1ea)
10-GUIDE ROD
10A-Rod/Main Plate screw(1ea)
11-BRUSH HOLDER
11A-Holder/Main Plate "T" screw(1ea)
11B-Holder/Brush set screw(3ea)
12-HOLD DOWN BRUSH
13-STRIP PLATE
13A-Strip Plate/Main Plate screw(2ea)
13B-Teflon tape
16-PHOTOSENSOR BRACKET
16A-Bracket/Main Plate "T" screw(1ea)
16B-Bracket/Sensor thumbscrew(2ea)
15-PHOTOSENSOR
(For clear or reflective material,
consult factory.)
17-MAIN PLATE
14-NUTPLATE FOR BRACKET
9-SHAFT COLLAR
9A-"T" adjustment screw(1ea)
4-O RING
22-POWER CORD
19-BASE
19A-Base/Main Plate screw(2ea)
NOTE: Drawing not to scale – for reference only.
EXPLODED VIEW
5
4
Using 5/32" (4mm) hex wrench, adjust reel holder arm to vertical.
Place the label roll on the 1" (25mm) reel hanger bar.
*If roll has 3" (76.2mm) core, use plastic spool*
Slide “O” ring onto reel hanger bar to hold roll against reel holder arm to ensure it is
held straight.
(Hex wrench, O-ring and spool included.)
Thread the liner under the guide rod, between the hold down brush and the strip plate,
then back under the strip plate. Lay the liner across the slot in the take-up hub. Slide the
lock rod into the slot to secure the liner. Align shaft collar on guide rod with edge of
liner to keep material feeding straight.
Hold Down Brush:
Using the upper thumbscrew on the side of the machine, adjust the hold down brush for
tensioning.
For best results, labels should be pressed firmly against the strip plate. If labels are held
too tightly, they will cause excessive drag on the motor.
Photosensor:
The photosensor can be adjusted in any direction to accommodate virtually any label.
Loosening the lower thumbscrew allows the photosensor to swivel and sets the overhang
distance of the label over the strip plate. When the label is being fed the correct
distance, tighten the lower thumbscrew.
Loosen the two screws on the front of the sensor holder to align the photosensor with
the center of the label. If there are two or more labels across, align the photosensor
with the last label to be removed. When these two screws are tightened, the machine
is set.
Hold Down Brush
Photosensor
Strip Plate
Guide Rod
Lock Rod
Take-up Hub
Reel Hanger Bar
Reel Holder Arm
Incorrect
Correct
Sensor sees beyond label
- Will not stop
Sensor sees strip plate
- Will not feed
Sensor sees front edge of label
ADJUSTMENTS
SET-UP INSTRUCTIONS
Positioning of Photosensor
Product specificaties
| Merk: | Brady |
| Categorie: | Niet gecategoriseerd |
| Model: | DSP-5 |
Heb je hulp nodig?
Als je hulp nodig hebt met Brady DSP-5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Brady
16 Juni 2025
6 Mei 2025
6 Mei 2025
6 Mei 2025
6 Mei 2025
6 Mei 2025
6 Mei 2025
6 Mei 2025
3 Juni 2023
Handleiding Niet gecategoriseerd
- Evooch
- IWH
- Chord
- Fosi Audio
- Worx
- Lava
- Grizzly
- SoundMagic
- Atmotube
- Ixxat
- MIOPS
- Erica Synths
- Tepro
- Ambient Recording
- Marshall Electronics
Nieuwste handleidingen voor Niet gecategoriseerd
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025