BOYA BY-BM3032 Handleiding

BOYA Microfoon BY-BM3032

Lees hieronder de 📖 handleiding in het Nederlandse voor BOYA BY-BM3032 (1 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1

BY-BM3032 13

Thanks for choosing BOYA!

TheBOYA BY-BM3032is a supercardioid on-camera shotgun

microphone oering directional audio capture, adjustable gain

(-10dB, 0, +20dB), High Pass Filter (0Hz, 75Hz, 150Hz) and broad

device compatibility for video production, vlogging, YouTubers,

and sound recordists.It also features the safety channel option on

right channel which helps you select wanted sound level

when you are not sure how loud the audio be captured or some

unexpected screeched might be.

And a selectable 5dB boost button for high frequency can allow

to used in some situation, such as using microphone outside with

fur windscreen.

With 3.5mm TRS jack, the microphone can be used to capture

audio for camcorders, DSLR, and portable recorders, It can run

for approximately 30 hours on two AA batteries.

1. Power Indicator

2. Mic ON/OFF

- Long press power button to power ON

- Short press power button to power OFF

3. High Pass Filter (0Hz, 75Hz, 150Hz)

4. Three position level control (-10dB, 0, +20dB)

5. High Frequency Boost LED

6. Safety Channel Indicator

7. 3.5 mm (1/8") Headphone Jack

8. Foam windscreen

9. Battery Compartment

10. Shock Mount

11. Camera Shoe Mount with 1/4” Thread

12. 3.5 mm (1/8") TRS Audio cable

Cable in illustrations is shown shorter for clarity. Note:

The actual cable is longer than the one pictured.

13. Fur windscreen

1. Press the button of battery compartment lid down and lift it up.

2. Insert the 2pcs of AA batteries. Make sure that the + and – signs

match the symbols in the compartment.

3. Replace the battery compartment lid.

INSTALLING THE BATTERY

SETTING UP YOUR MICROPHONE

To attach your microphone to a camera:

To attach your microphone to a tripod:

High-Pass Filter

The safty Channel

Automatic Power Function

High Frequency Boost

Sound Gain Level

• Microphone

• Foam windscreen

• Fur windscreen

• Carrying pouch

• Quick Setup Guide

1. Loosen the locking knob, then slide your microphone’s shoe

mount onto your camera.

2. Tighten the locking knob to secure your microphone.

3. Connect the 3.5 mm audio cable to your camera.

- Long press (dB±) button to make the output of the right channel of

the dual-mono signal lower by 10dB, the LED (dB±) will stay blue.

- Long press (dB±) button again to cancel this function, the LED (dB±)

will be o.

- If you're not sure how loud the audio you're capturing or

unexpected spikes might be, you can set the right channel

to record at a lower 10dB for safety.

- Short press low-cut ter switch ( ) to

select lter settings (0Hz, 75Hz, 150Hz).

- Long press High-Pass Flter switch ( )

to boost high frequency by 5dB.

When this function activate, the ( )

LED will stay blue.

- Long press High-Pass Flter switch ( )

again to cancel this function, the LED

will be o.

- Short press (dB±) button to select settings(-10dB, 0, +20dB)

1. Tighten the microphone to the 1/4" screw on a tripod or tripod plate.

See the instructions that came with your tripod for more information.

2. Connect the 3.5 mm audio cable to your camera.

1/4" mounting threads

- Long press power botton ( ) for 1 seconds to activate automatic

Power ON/OFF.

When plug microphone into a DSLR camera or portable recorder’s

3.5mm microphone input, the microphone can be automatically

power ON/OFF when equipment (DSLR camera or portable recorder)

is ON/OFF.

- Long press power botton ( ) for 1 seconds to cancel automatic

Power ON/OFF.

Status

The automatic Power ON/OFF

function is activate.

The automatic Power ON/OFF

function is cancelled.

The Power LED indicator ashes 3 times.

The Power LED indicator ashes 1 time.

PACKAGE CONTENTS

Directional On-camera Microphone

Instruction Manual

INSTRUCTURE

HOW TO USE

3 4

• For DSLR, Camcorder, Audio recorder

• Excellent O-Axis Signal Rejection

• Super-cardioid Polar Pattern

• Low Noise and Distortion

• 20 Hz to 20 kHz Frequency Response

• Features the Safety Channel function for Right Channel

• Automatic Power Function

• Three-step High Pass Filter (0Hz, 75Hz, 150Hz)

• Three position level control (-10dB, 0, +20dB)

• 3.5mm (1/8") Mini-Jack Output

• Includes fur Windjammer

• 2*1.5V Battery Powered

Acoustic Principle:

Polar Pattern:

Frequency Response:

Sensitivity:

Output Impedance:

S/N:

Gain Control:

High Pass Filter:

Output Connector:

Power Requirement:

Operating time with battery:

Size:

Weight:

Line gradient

Super-cardioid

20 – 20,000 Hz

-30±3dB (0dB=1V/Pa @ 1KHz)

200Ω

85dB

-10dB, 0dB, +20dB

0Hz, 75Hz, 150Hz

3.5 mm (1/8") stereo mini-jack

1.5V*2AA

30H

209.7 x 103.3 x 50mm (8.2” x 4” x 2”)

180g (6.3 oz)

FEATURES:

USING YOUR MICROPHONE

SPECIFICATION：

www.boya-mic.com

SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.

The BOYA logo is a trademark which is registered and owned by

Shenzhen Jiayz Photo Industrial., Ltd.

COPY RIGHT 2010-2020

Email: sales@boya-mic.com

www.boya-mic.com / www.jiayz.com

105x178

深圳市长丰影像器材有限公司

品牌

子件名称版本

材质

比例

审核暂无

吴蒙蒙

2019-6-26 核准/日期赵宏亮

单位1:1 mm尺寸

子件编号

设计/日期

长丰型号

变更日期变更担当变更内容版本修改名称

1 2

BY-BM3032说明书

BOYA BY-BM3032

1F0300300203

V00

105g双铜纸双面印刷 4折页

吴蒙蒙

长丰影像

2019-6-26

技术要求:

1、表面无色差

2、无正负公差

3、包装标注尺寸为内尺寸

Product specificaties

Merk:	BOYA
Categorie:	Microfoon
Model:	BY-BM3032
Kleur van het product:	Zwart
Breedte:	50 mm
Diepte:	209.7 mm
Hoogte:	103.3 mm
Soort:	Microfoon voor digitale camcorders
Stroombron:	Batterij/Accu
Connectiviteitstechnologie:	Bedraad
Ondersteund aantal accu's/batterijen:	2
Aansluiting:	3,5 mm (1/8 ")
Signaal/ruis-verhouding:	85 dB
Microphone direction type:	Supercardioïde
Gevoeligheid microfoon:	-30 dB
Frequentie microfoon:	20 - 20000 Hz
Aantal producten inbegrepen:	1 stuk(s)
Gewicht microfoon:	180 g
Output impedance:	200 Ohm