BOYA BY-BCA70 Handleiding

BOYA Microfoon BY-BCA70

Lees hieronder de 📖 handleiding in het Nederlandse voor BOYA BY-BCA70 (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
BY-BCA70
1
2
3
4
5
7
6
8
9
OFF/ON/PH
POWER
OFF/ON/PH
OFF/ON/PH
OFF/ON/PH
Instruction Product Structure:
How to use
Trouble shooting
Specication:
Features
Thanks for choosing BOYA!
The BOYA BY-BCA70 is a professional XLR audio adapter which
is specially designed for increasing the convenient exibility of
your XLR microphone to most mobile devices. Included with
three detachable audio cables:USB Type-C, lightning and USB-A,
BY-BCA70 allow any XLR microphones to be compatible with PC,
Andorid / iOS smartphones, tablets etc, ideal for home studio
recording, podcast, vocal & instrument solo recording, ENG,
interviews and more.
Features with up to 24bit/96kHz sampling rate, BY-BCA70 allows the
recording les to be of high resolution and as crystal clear as possible.
Powered by smartphones or PC, BY-BAC70 could even support
Phantom power to driven any XLR large diaphragm condenser mic,
or shotgun mic that requires Phantom power.
With 0dB-30dB gain control available, users could easily adjust the
microphone volume according to the recording environment.
With integrated 3.5mm no-latency headphone monitoring jack
(depends on the recording App), users could well-monitoring
the sound during or after recording.
- If the microphone requires Phantom power, turn the
switch to PH.
- If the microphone is self-powered,turn the switch to ON.
- Please follow the steps to complete BY-BCA70 and smartphone
connection.
The BY-BCA70 volume control is on the right side by turning left
and right to adjust the audio input level.
Frequency Response:
Volume gain control:
Sampling Frequency:
Bitrate:
Power Supply:
Output Connector:
Weight:
Cable length:
30Hz-20kHz
0dB~30dB
44.1kHz/ 48kHz/ 96kHz
16bit/24bit
Powered by iOS/ Android mobile devices/ PC
Type-C to Lightning (MFI certied)
Type-C to USB
Type-C to Type-C
205g (7.2oz)
6m (236“)
If you have any problem using the BY-BCA70 components, use the
following checklist.
If any problem persist, please consult our local dealer, or contact us
directly at sales@boya-mic.com.
1) The BY-BCA70 is equipped with the Type-C connector, please
choose the corresponding cable for your device’s connection.
(The Type-C to Lightning connector cable allows to plug directly
into the iOS devices. And the Type-C to Type-C connector cable is
designed for the Android devices)
2) A third-party audio APP needs to be downloaded before recording.
Please plug the headphone into the audio monitoring jack when
you need to monitor sound.
- The indicator light will turn blue when the switch turns to ON.
- The indicator light will turn green when the switch turns to PH.
1. Power switch
Note:
1. Plug the XLR microphone into the BY-BCA70
2. Connect the BY-BCA70 to smartphone or computer
3. Input level adjustment
There is no sound.
The sound is weak.
There is distortion
in the sound.
Too much
ambience is
being picked
up.
The switch is
turned incorrectly.
Please check the microphone type. Turn the switch
to ON when connecting to the self-powered
microphone. Turn the switch to PH when connecting
to the Phantom power required microphone.
Please reconnect the audio connector.
Please reconnect the headphone to the jack.
Or check if the APP support no latency headphone
monitoring, if not, pls play back to monitoring the
sound.
Adjust the volume gain control to the right to adjust
the volume.
Use the headphone with a stereo mini jack.
Make sure that the microphone is as close as
possible to the subject.
The connector is not
completely plug into the
place.
The headphone is not well
connection with the jack.
The input level of the
microphone is low.
Headphone with a
mono min jack is used.
When using an omnidire-
ctional microphone, the
microphone may be
picking up too much
ambience.
Status Cause Measure
2. Headphone monitoring jack
3. Volume gain control
4. USB Type-C output connector
5. Indicator light
6. XLR input connector
7. USB Type-C to USB Type-C audio cable
8. USB Type-C to Lightning audio cable
9. USB Type-C to USB-A audio cable
- Detachable USB Type-C, Lightning and USB Type-A
audio cables included
- Connect any XLR microphones to PC and smartphones
- Powered by smartphones and PC
- 48V Phantom power available
- 24bit/ 96kHz sampling rate
- No latency headphone monitoring(Depends on App)
- 6 meters cable
- 0dB~30dB volume gain control
- If the microphone is Phantom power required, turn the
BY-BCA70 switch to PH.
- If microphone is self-powered, turn the BY-BCA70 switch to ON.
- Please follow the steps to complete the connection between
BY-BCA70 and the computer.
1) Please use the Type-C to USB-A cable to connect your computer.
The Type-C connector makes a connection with the BY-BCA70.
And the USB-A connector to makes a connection with the Mac
or Windows PC.
2) A third party audio APP need to be downloaded on the PC before
recording. Please plug the headphone into the audio monitoring
jack when you need to monitor sound.
www.boya-mic.com
SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.
The BOYA logo is a trademark which is registered and owned by
Shenzhen Jiayz Photo Industrial., Ltd.
COPY RIGHT 2010-2020
TEL: 400 6131096
Email: sales@boya-mic.com
www.boya-mic.com / www.jiayz.com
Audio Adapter for XLR Microphones to Mobile Devices
品牌 长丰型号
8
变更日期 变更担当变更内容版本修改名称
7
1 2
BOYA BY-BCA70
技术要求:
1、表面无色差
2、无正负公差
3、包装标注尺寸为内尺寸


Product specificaties

Merk: BOYA
Categorie: Microfoon
Model: BY-BCA70

Heb je hulp nodig?

Als je hulp nodig hebt met BOYA BY-BCA70 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon BOYA

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon