Bowers And Wilkins Formation Flex Handleiding

Bowers And Wilkins Speaker Formation Flex

Lees hieronder de 📖 handleiding in het Nederlandse voor Bowers And Wilkins Formation Flex (76 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/76

ENGLISH

www.bowerswilkins.com

Welcome to Bowers & Wilkins and Formation Flex.

Thank you for choosing Formation. When John Bowers rst established Bowers

& Wilkins he did so in the belief that imaginative design, innovative engineering

and advanced technology were keys that could unlock the enjoyment of audio

in the home. That belief continues to inspire every product we design and in

Formation has found its most advanced expression yet.

Formation Flex is a network connected, wireless active speaker that provides

extremely high performance reproduction of Formation audio streams. Formation

Flex is primarily intended to be congured and controlled using the Bowers &

Wilkins Home app. The app is available for both iOS and Android devices. Some

commonly used control functions are also available via touch buttons on the

Formation Flex top panel. It is only possible to install and congure a Formation

Flex using the Bowers & Wilkins Home app.

Formation Flex will enable you to:

• Listen to audio from streaming services like Spotify, Apple Music, and Roon.

• Listen to network stored audio les.

• Listen to audio over Bluetooth from appropriately enabled Bluetooth

source devices.

• Listen to audio from devices such as turntables (via a phono preamp) and

CD players that are connected to a Bowers & Wilkins Formation Audio.

• Listen to audio, such as Internet Radio, from Airplay or Bluetooth

compatible services and apps.

• Listen to audio playing anywhere in your home on any Formation device

connected to your home network.

The Bowers & Wilkins Home app is required to connect your Formation Flex

to your home network and also to establish a connection with other Formation

products in your home. The Bowers & Wilkins Home app also provides some

control and conguration functions during use. Before you begin your Formation

Flex installation please download and install the Bowers & Wilkins Home app on

your iOS or Android device. The Bowers & Wilkins Home app requires iOS V11.4

or later, or Android V8.1 or later. Bluetooth, and WiFi services must be enabled

on your iOS or Android device. You will also need to know your WiFi network

password.

Note: Location Services must be enabled on Android devices during the

Formation setup process. This is because Formation products use a low power

form of Bluetooth (BT-LE) for service communication which on Android devices is

only switched on when Location Services are enabled. Bowers & Wilkins do not

use any location services data for marketing purposes.

ENGLISH

1. Formation Flex Carton Contents

Formation Flex

Mains power cable set appropriate for your territory

Document pack

2. Installing Your Formation Flex

Formation Flex can be used in a range of situations

— as a single mono speaker, as a compact stereo

pair, or as rear surround speakers in a 5.1 home

theatre setup.

When used as a stereo pair, your Formation Flex

should be at least 1m (3ft) apart and a similar

distance from the listening area. If the speakers

are positioned too close together, the stereo

reproduction may lack scale; if they are too far

apart, the stereo focus may be weak. There is no

need to angle your Formation Flex inwards towards

the listening area however doing so may tighten

the stereo focus. Diagram 1 illustrates basic

speaker positioning.

When used as rear speakers in a 5.1 home theatre

conguration, your Formation Flex should be placed

as close to 120 degrees from the front centre

speaker as possible, as shown in Diagram 2.

Your Formation Flex requires a mains power supply

to operate so must be located within reach of a

mains socket. If your Formation Flex is to use a

wired connection to your home network it will need

to be located within reach of an appropriate network

(Ethernet) cable.

If you decide to place your Formation Flex on a

shelf, ensure that the shelf is easily able to support

the weight.

Like the vast majority of speakers, your Formation

Flex radiates sound energy not only forward but

also to the side and rear. Consequently, if your

Formation Flex is positioned close to room

boundaries, or particularly in a corner, bass may

become over emphasised. If you nd that bass

from your Formation Flex is too prominent, moving

it to an alternative position may be benecial,

however you can also adjust the bass level via

the Bowers & Wilkins Home app Settings menu.

Diagram 1

Stereo positioning

Diagram 2

Home theatre positioning

120º

1 metre

Product specificaties

Merk:	Bowers And Wilkins
Categorie:	Speaker
Model:	Formation Flex
Kleur van het product:	Black,Gold
Gewicht:	2300 g
Breedte:	130 mm
Diepte:	130 mm
Hoogte:	215 mm
Bluetooth:	Ja
Bluetooth-versie:	4.1
Connectiviteitstechnologie:	Draadloos
Type stroombron:	AC
Gemiddeld vermogen:	- W
Stroomverbruik (in standby):	6 W
Versterker output power:	100 W
Aanbevolen gebruik:	Thuis
USB-aansluiting:	Ja
Audio-uitgangskanalen:	- kanalen
Speaker plaatsing:	Tafelblad/Boekenplank
Aantal drivers:	2
Woofer:	Ja
Frequentiebereik:	50 - 28000 Hz
Versterker:	Ingebouwd
Diameter woofer:	101.6 mm
Aantal woofer drivers:	1
Diameter hogetonenluidspreker:	1 "
Aantal tweeter drivers:	1
Tweeter:	Ja
Wifi:	Ja
AC-ingangsspanning:	100-240 V
AC-ingangsfrequentie:	50/60 Hz
AirPlay:	Ja
Versterker klasse:	D