Boss GT-1000CORE Handleiding

Boss Niet gecategoriseerd GT-1000CORE

Lees hieronder de 📖 handleiding in het Nederlandse voor Boss GT-1000CORE (18 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
Owner’s Manual
Owner’s Manual (this document)
Read this rst. It explains the basic things you need to know in
order to use the GT-1000CORE.
PDF Manual (download from the Web)
5Parameter Guide
This explains all parameters of the GT-1000CORE.
5Sound List
This is a list of the sounds built into the GT-1000CORE.
5MIDI Implementation
This is detailed information about MIDI messages.
To obtain the PDF manual
1. Enter the following URL in your computer.
http://www.boss.info/manuals/
I
2. Choose “GT-1000CORE” as the product name.
Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connecting the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Turning the Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Specify the Type of Amplier You Have Connected . . . . . . 3
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Using the Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tuner Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Selecting a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
About the Play Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Selecting the Control Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Using the GT-1000CORE with a Bass Guitar . . . . . . . . . . . . . . 5
Editing: Eects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Basic Procedure for Eect Editing . . . . . . . . . . . . . . . . . . . . . . . . 6
Eect Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using STOMPBOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Editing the STOMPBOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Reading STOMPBOX Settings into a Patch . . . . . . . . . . . . . . . 7
Writing Patch Settings into a STOMPBOX . . . . . . . . . . . . . . . . 8
Saving a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Editing: MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Basic MENU Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Assigning Favorite Parameters to [1]–[5] Knobs . . . . . . . . . . 9
Adjusting the Contrast (Brightness) of the Display . . . . . . . 9
Restoring the Factory Default Settings (Factory Reset) . . . 10
Turning O the Auto O Function . . . . . . . . . . . . . . . . . . . . . . . 10
Using the Metronome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installing the USB Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using the GT-1000CORE as an Audio Interface . . . . . . . . . . . 11
Connecting with an External MIDI Device . . . . . . . . . 12
Operations from the GT-1000CORE . . . . . . . . . . . . . . . . . . . . . . 12
Operations from an External MIDI Device . . . . . . . . . . . . . . . . 12
Footswitch and Expression Pedal Settings . . . . . . . . 13
Assigning a Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Making Assignments from the Eect Edit Screen
(Quick Assign) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connecting External Pedals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Looper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Assigning Looper Functions to Switches . . . . . . . . . . . . . . . . . 15
Loop Playback Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Switch Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
© 2020 Roland Corporation
Before using this unit, carefully read “USING THE UNIT SAFELY” and
“IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY” and Owner’s
Manual (p. 16, 17)).After reading, keep the document(s) where it will
be available for immediate reference.
2
Getting Ready
Connecting the Equipment
* To prevent malfunction and equipment failure, always turn
down the volume, and turn o all the units before making any
connections.
* Before turning the unit on/o, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/o. However, this is normal
and does not indicate a malfunction.
NOTE
While the display indicates “SAVING...,” data is being
saved. Do not turn o the power during this time.
SEND (1, 2)/RETURN (1, 2) jacks
Connect an external eect processor
here.
OUTPUT jack
Connect your equipment to the OUTPUT jack(s).
2
Connect your guitar, etc.
3
MIDI IN/OUT jacks
Connect an
external MIDI
device here.
(p. 12)
* Use a
TRS/MIDI
connecting cable (sold separately:
BMIDI-5-35) to connect an
external MIDI device.
* Do not connect an audio
device here. Doing so will cause
malfunctions.
USB COMPUTER port
Use a USB cable
to connect to a
computer and
exchange audio/MIDI
data between the
GT-1000CORE and
the computer (p. 11).
You can also use the SEND (1, 2)/RETURN
(1, 2) jacks as SEND (L, R)/RETURN (L, R) jacks
for connecting a stereo eect unit.
You can also use the SEND (1, 2) jacks as
SUB OUT jacks, and use the RETURN jacks as
AUX IN jacks.
For details on the parameter, refer to
“GT-1000CORE Parameter Guide” (PDF).
DC IN jack
Connect the included AC adaptor
here.
* The DC IN jack
also serves as the
power switch. Power is turned on
whenever a plug is inserted into
the DC IN jack, and is turned o
when the plug is disconnected.
Indicator
CTL2, 3/EXP 1 jack, CTL4, 5/EXP 2 jack
You can control various parameters by connecting an expression pedal (EV-30,
Roland EV-5: sold separately) or a footswitch (FS-5U, FS-6, FS-7: sold separately).
For details on the settings, refer to “Footswitch and Expression Pedal Settings”
(p. 13).
* You can use the CTL4, 5/EXP 2 jack to switch the channels of your guitar amp. For
details, refer to “GT-1000CORE Parameter Guide” (PDF).
* Use only the specied expression pedal. By connecting any other expression
pedals, you risk causing malfunction and/or damage to the unit.
Connect these to your guitar amp, mixer, or headphones
(sold separately.
* If using a mono connection, use only the R/MONO jack.
* Connect your headphones to the L/PHONES jack. If you’re
using headphones, don’t connect anything to R/MONO
jack.
* Only the OUTPUT signal is output from the headphones.
The SUB OUT signal is not
output. For details, refer to
“GT-1000CORE Parameter
Guide” (PDF).
Turn down the volume of the connected device.
1
Turn on the power of the amp(s).
5
Rear Panel Side Panel (Left)
Ground Terminal
* Connect this
to an external
earth or ground
if necessary. Turning the power on.
4
Connect your guitar or the output of another eect
unit.
If you are inputting in mono, use only the R/MONO
jack.
INPUT R/MONO, L jacks
Attaching the Rubber Feet
You can attach the rubber feet (included) if necessary.
Attach them in the locations shown in the illustration.
* Using the unit without rubber feet may damage the oor.
* When turning the unit over, be careful so as to protect the buttons and knobs from damage. Also, handle the unit carefully; do not drop it.
3
Getting Ready
In this manual, the order of the MENU operations is written as
follows.
<Example>
Press the [MENU] button.
Use the [3] knob to select “IN/OUT SETTING.”
Use the [1] knob to select “INPUT.”
?
Choose [MENU] 0 “IN/OUT SETTING” 0 “INPUT.”
Turning the Power On
Turn the power on in the order of steps 1–5.
To turn the power o, reverse the order.
Specify the Type of Amplier You Have Connected
1. Choose [MENU] 0 “IN/OUT SETTING” 0 “OUTPUT” 0
“OUTPUT SELECT.”
The menu screen appears.
2. Turn knob [SELECT] to select the type of amp.
For details on the amp types, refer to the “GT-1000CORE
Parameter Guide” (PDF).
MEMO
If you are using the AIRD PREAMP of the GT-1000CORE,
we recommend that in order to take full advantage of its
characteristics, you connect to an input that is not aected
by a preamp, such as the RETURN jack, rather than using the
guitar input jack that is aected by the preamp of the guitar
amp.
Adjusting the Volume
Use [OUTPUT LEVEL] knob to adjust the overall
volume of the GT-1000CORE.
Using the Tuner
The GT-1000CORE is equipped with a conventional monophonic
tuner which lets you tune your instrument one string at a time,
and a polyphonic tuner which lets you play and tune all of your
open strings simultaneously.
1. Press the [I] (H) switch.
The tuner screen appears.
You can use the PAGE [K] [J] buttons to switch the tuner
display.
Monophonic/polyphonic display
Monophonic display
Polyphonic display
You can also start the tuner as follows.
1. Choose [MENU] 0 “TUNER.”
“TUNER” is located in the rst page of the menu.
Use the PAGE [K] [J] buttons to access the rst page.
Tuner Settings
To make tuner settings, use knobs [1]–[6] located below the
display.
Tuner settings
Parameter Value Explanation
[1] MODE
(TUNER MODE) NORMAL, STREAM
Species the meter display
method for the monophonic
tuner.
[2] Pitch 435–445 Hz
(default: 440 Hz) Species the reference pitch.
[3] OUTPUT
MUTE Sound will not be output
while tuning.
BYPASS
While tuning, the sound of
the guitar being input to the
GT-1000CORE will be output
without change. All eects
will be o.
THRU
Allows you to tune while
hearing the current eect
sound.
* Only for monophonic
tuner.
[4] TYPE
6-REG
(6-REGULAR),
6-DROP D,
7-REG
(7-REGULAR),
7-DROP A,
4-B REG
(4-B REGULAR),
5-B REG
(5-B REGULAR)
Selects the type of tuning
for the polyphonic tuner.
[5] OFFSET -5–-1, ----
Adjusts the reference pitch
of the polyphonic tuner in
semitone units relative to
standard tuning.

Product specificaties

Merk: Boss
Categorie: Niet gecategoriseerd
Model: GT-1000CORE

Heb je hulp nodig?

Als je hulp nodig hebt met Boss GT-1000CORE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Boss

Boss

Boss Gigcaster 8 GSC-8 Handleiding

26 Maart 2024
Boss

Boss TU-80 Handleiding

4 Maart 2024
Boss

Boss Reverb RV-6 Handleiding

1 Maart 2024
Boss

Boss Reverb RV-200 Handleiding

7 December 2023
Boss

Boss GKC-AD Handleiding

5 September 2023
Boss

Boss SDE-3000D Handleiding

5 September 2023
Boss

Boss Modulation MD-500 Handleiding

4 September 2023
Boss

Boss GT-1000CORE Handleiding

4 September 2023
Boss

Boss Pocket GT Handleiding

4 September 2023
Boss

Boss Metal Zone MT-2W Handleiding

4 September 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024