Boss RC-500 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Boss RC-500 (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 91 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
Owner’s Manual (this document)
Read this rst. It explains the basic things you
need to know in order to use the RC-500.
Parameter Guide (download from the Web)
This explains all of the parameters of the RC-500.
To obtain the Parameter Guide
1. Enter the following URL on your
computer.
http://www.boss.info/manuals/
2. Choose “RC-500” as the product name.
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaet “USING THE
UNIT SAFELY” and the Owner’s Manual (p. 27)). After reading, keep the document(s) where it will be available for
immediate reference.
© 2020 Roland Corporation
Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installing the Batteries . . . . . . . . . . . . . . . . . . . . . . . . 2
Connecting the Equipment . . . . . . . . . . . . . . . . . . . 2
Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
How the RC-500 Is Organized . . . . . . . . . . . . . . . . . . 6
Creating a Loop Phrase . . . . . . . . . . . . . . . . . . . . . . 7
Recording on a Single Track . . . . . . . . . . . . . . . . . . . 7
Recording on Two Tracks . . . . . . . . . . . . . . . . . . . . . . 8
Record While Listening to the Rhythm Sound . . . . 9
Sounding a Rhythm . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting the Tempo of Rhythm . . . . . . . . . . . . . . . . 9
Saving a Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Saving a Memory (WRITE) . . . . . . . . . . . . . . . . . . . . . 10
Erasing Data from a Memory (CLEAR) . . . . . . . . . . . 10
Editing a Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Editing the Settings of Tracks 1 and 2 . . . . . . . . . . . 11
Editing the Settings of a Memory . . . . . . . . . . . . . . 12
Using the Loop FX . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Specifying the Function of the Switches . . . . . . . 13
Editing the Rhythm Settings . . . . . . . . . . . . . . . . . . . 14
Changing How the Rhythm Starts and Stops . . . 15
Settings for the Entire RC-500 . . . . . . . . . . . . . . . . 16
System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Input/Output Settings . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting a Computer via USB . . . . . . . . . . . . . 18
Connecting the RC-500 and Computer . . . . . . . . . 18
Backing-Up or Recovering Data . . . . . . . . . . . . . . . . 19
Controlling Devices via MIDI . . . . . . . . . . . . . . . . . 20
MIDI Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Controlling an External MIDI Device from the
RC-500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Controlling the RC-500 from an External MIDI
Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Connecting Two RC-500 Units . . . . . . . . . . . . . . . . . 21
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Error Message List . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Restoring the Factory Default Settings
(Factory Reset) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . . 26
USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . . . 27
IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . 27
Owner’s Manual
2
Getting Ready
Installing the Batteries
Install four alkaline batteries (AA, LR6) in the battery compartment located on the bottom of the unit.
* When turning the unit over, be careful so as to protect the buttons and knobs from damage. Also, handle the unit
carefully; do not drop it.
* If you handle batteries improperly, you risk explosion and uid leakage. Make sure that you carefully observe all of
the items related to batteries that are listed in “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (separate sheet
“USING THE UNIT SAFELY” and owner’s manual (p. 27)).
* “BATTERY LOW” will appear on the display if the batteries are low. Replace them with new ones.
Attaching the Rubber Feet
You can attach the rubber feet (included) if necessary.
Attach them in the locations shown in the illustration.
Connecting the Equipment
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making
any connections.
* Before turning the unit on/o, always be sure to turn the volume down. Even with the volume turned down, you
might hear some sound when switching the unit on/o. However, this is normal and does not indicate a malfunction.
Pin assignment
MIC IN connector
1: GND
2: HOT
3: COLD
O (USB ) port
You can connect your computer here and use it
to back up or recover data (p. 19).
MIDI OUT, MIDI IN connectors
Connect an external MIDI device here.
To make these connections, use TRS/MIDI connecting cables (sold separately:
BMIDI-5-35).
This lets you control an external MIDI device from this unit via MIDI. For
details, refer to p. 20.
Accepts connection of an AC Adaptor (PSA-S series;
sold separately). By using an AC Adaptor, you can play
without being concerned about how much battery
power you have left.
If the AC adaptor is connected while power is on, the
power supply is drawn from the AC adaptor.
DC IN jack
* Use only the specied AC adaptor
(PSA-S series; sold separately),
and connect it to an AC outlet of
the correct voltage. Do not use
any other AC adaptor, since this
may cause malfunction.
3
Getting Ready
Connecting the Equipment
OUTPUT jacks (A/MONO, B)
To use this as EXP jack
Connect an expression pedal.
To use this as CTL 1, 2 jack
Connect a footswitch.
Use only the specied expression pedal (FV-500H,
FV-500L, EV-30, and Roland EV-5; sold separately).
By connecting any other expression pedals, you
risk causing malfunction and/or damage to the
unit.
FS-6 FS-7
CTL 2
FS-5U x 1
FS-5U
FS-6
Mode/Polarity switch
FS-7
1/4” phone type
1/4” phone type
Stereo 1/4” phone type
Stereo 1/4” phone type
Stereo 1/4” phone type
Stereo 1/4” phone type
CTL 1CTL 2 CTL 1CTL 1
CTL 1, 2/EXP jack
You can connect separately sold expression pedal or
footswitches to this jack, and use the expression pedal
or footswitches to control a variety of functions.
INST IN jacks (A/MONO, B)
Connect your electric guitar/bass or eect unit
to these jacks.
Use the A/MONO jack and B
jack when connecting a stereo-
output eects unit. Use only
the A/MONO jack if you’re
using a mono source.
Connect these jacks to your amp or monitor speakers.
If you’re using a mono setup, use only the A/MONO jack.
Even sound that is input in stereo is output in mono.
Turning the power on/o
The OUTPUT A/MONO jack doubles as the power switch.
Power to the unit is turned on when you plug into the OUTPUT
A/MONO jack; the power is turned o when the cable is
unplugged.
When powering up:
Turn on the power to your amp last.
When powering down:
Turn o the power to your amp rst.
MIC IN connector
Connect your microphone here.
If you’re using a condenser mic
that requires phantom power, turn
on this unit’s phantom
power (p. 17).
Pin assignment
CTL 1, 2/EXP jack
RINGTIP
Stereo 1/4” phone type
1/4” phone type x 2
CTL 1 CTL 2
FS-5U x 2


Product specificaties

Merk: Boss
Categorie: Niet gecategoriseerd
Model: RC-500
Kleur van het product: Rood
Ingebouwd display: Ja
Gewicht: 950 g
Breedte: 170 mm
Diepte: 138 mm
Hoogte: 62 mm
Gebruikershandleiding: Ja
Connectiviteitstechnologie: Bedraad
Type stroombron: Battery, DC
Aantal USB 2.0-poorten: 1
Ondersteund aantal accu's/batterijen: 4
Operationele tijd: 3.5 uur
Soundeffects: Looper
MIDI in: Ja
MIDI out: Ja
Aansluiting voor netstroomadapter: Ja
Bit rate: 32 Bit
Batterijen inbegrepen: Ja
Type beeldscherm: LCD
Type batterij: AA
Uitgang van 6,35 mm (1/4-inch): 1
Ingang van 6,35 mm (1/4-inch): 1
Maximale opnametijd van looper: 46800 s

Heb je hulp nodig?

Als je hulp nodig hebt met Boss RC-500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Boss

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd