Bose build Cube Handleiding

Bekijk gratis de handleiding van Bose build Cube (2 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 5.0 sterren uit 7 reviews. Heb je een vraag over Bose build Cube of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Bluetooth

®

button

Press to announce connected devices.

Press and hold to pair a new device.

Bluetooth indicator light

Blinking blue: Ready to pair

Solid white: Connected

Power/mode button

Press to select color mode.

Press and hold to turn the speaker cube off.

Press once to turn it back on.

Note:

is button is only active when the

BOSEbuild Sound app is not connected.

Color slider

Selects color or speed for color modes.

Note:

is slider is only active when the

BOSEbuild Sound app is not connected.

Coil connector

Connect the yellow coil here.

Speaker connector

Connect the speaker panel here.

Expansion connector

For future accessories.

Aux connector

Connect a 3.5 mm stereo audio cable here.

Power connector

Connect the included power supply here.

BOSEbuild

™

Speaker Cube

Controls and connections

CONTROL PANEL – FRONT

CONTROL PANEL – BACK

You can use your speaker with any device that features headphone or audio output, such as a

portable digital music player.

is feature requires using a stereo audio cable with a 3.5 mm

plug on each end to connect the audio output of your device to the AUX input of the speaker.

is type of cable is available at electronics stores.

To connect an AUX device:

1. Connect the speaker to AC power.

2. Connect the audio cable to the AUX connector on the speaker and to the headphone or

audio output connector on the device.

3. Use the connected device’s audio controls to adjust the volume level.

Note: When an audio cable is connected to the speaker’s AUX connector, the speaker

automatically switches to the AUX source. To switch back to the source, unplug the Bluetooth

audio cable.

Connecting an AUX device

e sound quality of your speaker can vary depending on where the speaker is placed in a

room. Keep the following guidelines in mind when placing your speaker.

•

e speaker’s Bluetooth

®

range is 33 feet (10 m). If you move the device too far away from the

speaker, sound quality will be affected and the device may disconnect from the speaker.

• For optimal performance, the speaker cube should be tightly sealed with no visible gaps or

openings, and the front of the speaker should face the listener.

• For best bass response, the back of the speaker should be placed near a wall, but not directly

against a wall. Bass response decreases as the speaker is moved away from a wall.

• Do not place the speaker in small areas that are enclosed on all sides except the front, as this

will adversely affect sound quality.

Tips on placing the speaker

To restore your speaker cube to factory default settings:

1. Unplug the speaker.

2. With the speaker unplug

ed and unpowered, press and hold the Power/Mode button.

3. While holding the Power/Mode button, connect the speaker to AC power.

4. Continue holding the Power/Mode button for ten seconds, until the lights flash green.

e system resets, the indicator light blinks blue, and you hear “Ready to pair.”Bluetooth

Factory reset

Bose Corporation, The Mountain,

Framingham, MA 01701-9168 USA

rev03

The ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license.Bluetooth

©2016 Bose Corporation. No part of this work may be reproduced, modied, distributed, or otherwise used without prior written permission.

BOSEbuild

™

Speaker Cube

System status indicator light

Product specificaties