Bosch VTC-206 Handleiding

Bosch Bewakingscamera VTC-206

Lees hieronder de 📖 handleiding in het Nederlandse voor Bosch VTC-206 (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Technical S pecifications

Dimensions

23(0.91)

78.8(3.10)

75.8(2.98)

Installation

V TC-206 S eries - Operation Manual

12 VDC

BNC Female

12 VDC Power Supply Class2

Video IN(75 Ohm)

MONITOR

Not supplied

CONNECTION

MOUNTING POSITION

mm(in)

50(1.97)

Ф40(1.57)

28.6(1.13)

24.8(0.98)

1/4"-20 UNC

3-Ф3.2(0.13)

Video

CCD Camera 1/3-inch Super HAD CCD II

Effective pixels (HxV) 976 x 582 (PAL) / 976 x 494 (NTSC)

Color Resolution 600 TVL (min.)

Electronics shutter 1/50 to 1/120,000 s (PAL) 1/60 to 1/120,000 s (NTSC)

Output Signal 1 VPP composite video, 75 ohm

Output connection BNC connector

S/N Ratio Greater than 50 dB

Gamma 0.45

Minimum Illumination 0.1 lx at F2.0 / 30IRE

Lens 3.6 mm  xed

Mechanical

Housing Compact, water resistant

Construction Robust aluminum

Weight 68 g (2.4 oz) approximately

Electrical

Power 12 VDC, 83 mA max.

Power Supply Not included

Environmental

Operational Temp. -10 °C to +50 °C (+14 °F to +122 °F)

Storage Temp. -20 °C to +60 °C (-4 °F to +140 °F)

Environment IP67 certi ed

Never face the camera towards bright (sun)light

In wet or moist applications, seal

camera connections to ensure

protection against water ingress

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions;

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

Note

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at

his own expense.”

WA RNING

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be

required to take adequate measures.

Ca ut ion

Any changes or modications in construction of this device which are not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

These servicing instructions are for use by qualied service personnel only. To reduce the risk of electric shock do not perform

any servicing other than that contained in the operating instructions unless you are qualied to do so.

In USA and Canada, Use Class 2 Power Supply Only.

Caution

Important safety instructio ns

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Clean only with dry cloth.

6) Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

7) Do not install near any heat sources such as radiators, heat

registers,stoves, or other apparatus (including ampliers) that produce heat.

8) Do not defeat the safety purpose of the polarized or

grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and

a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into

your outlet, consult an electrician for replacement of the obsolete outlet.

9) Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10) Only use attachments/accessories specied by the manufacturer.

11) Use only with the cart, stand, tripod, bracket, or table specied by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid injury from tip-over.

12) Unplug this apparatus during lightning storms or when unused for

long periods of time.

13) Refer all servicing to qualied service personnel. Servicing is

required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's

enclosure that may be of sufcient mangnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance(servicing)

instruction in the literature accompanying the appliance.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at

the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,

please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material

resources.

This product should not be mixed with other commercial wastes purchased this product, or their local government ofce, for

details of where and how they can take item for environmentally safe recycling. Business users should contact their supplier

and check the terms and conditions of the purchase contract. Household users should contact either the retailer where they

for disposal.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER(OR BACK). NO USABLE PARTS ARE

INSIDE. LEAVE SERVICING TO QUALIFED SERVICE PERSONNEL.

CAUTIO N

1. A regulated DC12V 300mA power supply is recommended for use with this camera for the best picture and the most stable

operation.

An unregulated power supply can cause damage to the camera. When unregulated power supply is applied, product warranty

will be void.

2. The camera signal must be terminated with 75 Ohm. If your monitor is switched to high impedance then please adjust

accordingly.

3. Do not attempt to disassemble the camera to gain access to the internal components. Refer servicing to your dealer.

4. Never face the camera towards the sun or any bright or reective light, which may cause smear on the picture and possible

damage to the CCD.

5. Do not remove the product label with serial number, removing the label will void the product warranty.

Product specificaties

Merk:	Bosch
Categorie:	Bewakingscamera
Model:	VTC-206
Kleur van het product:	Zwart
Gewicht:	79 g
Soort:	CCTV-bewakingscamera
Materiaal behuizing:	Aluminium
Internationale veiligheidscode (IP):	IP67
Vormfactor:	Rond
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Montagewijze:	Plafond/muur
Maximum resolutie:	976 x 494 Pixels
Stroomuitvoer (volt):	+12V
Minimale belichting:	0.1 Lux
Ingebouwde HDD:	Nee
Nachtvisie:	Nee
Vaste focale lengte:	2 mm
Formaat analoog signaal:	NTSC
Omvang optische sensor:	1/3 "
Type beeldsensor:	CCD
Optische zoom:	- x
Camera sluitertijd:	1/60 x 1/120000 s
Interface:	BNC
Type camerasluiter:	Elektronisch
Effectieve sensorresolutie:	720 Pixels
Temperatuur bij opslag:	-20 - 60 °C
Veiligheidsfunties:	Waterbestendig
Stroomverbruik:	83 mA
Signaal/ruis-verhouding:	50 dB
Power over Ethernet (PoE):	Nee
PTZ control:	Nee
Wifi:	Nee
Bedrijfstemperatuur (T-T):	-10 - 50 °C
Lens diameter:	3.6 mm
NTSC resoluties:	976 x 494 Pixels