Bosch FlexiDome micro 1000 Handleiding

Bosch Bewakingscamera FlexiDome micro 1000

Lees hieronder de 📖 handleiding in het Nederlandse voor Bosch FlexiDome micro 1000 (4 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 73 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
1 2 3 4
x1
Front
T4 (Ø4 mm)
Ø 6 mm
x2
x2
Ø24 mm
BNC
female
75 Ohm
CVBS
1 Vpp RED = +
not included
12 VDC
0.1 A min.
Class 2
400 series
Menu
Pan
360°
Tilt 60°
x1
Click
Set
1 Safety
1.1 Safety precautions
DANGER!
High risk: This symbol indicates an imminently hazardous
situation such as "Dangerous Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily
injury.
CAUTION!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of
damage to the unit.
CAUTION!
The Low Voltage power supply unit must comply with EN60950
/ UL60065. The power supply must be a SELV-LPS unit or a
SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power
Source) and output rated 12 VDC, 0.1 A minimum.
CAUTION!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code
NEC800 (CEC Section 60) or applicable local codes.
1.2 Important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Install in accordance with the manufacturer's instructions.
8. Do not install unit near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
10. Only use attachments/accessories specified by the
manufacturer.
11. Unplug this apparatus during lightning storms or when
unused for long periods of time.
12. Refer all servicing to service personnel. Servicing is
required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
1.3 FCC & ICES compliance
FCC & ICES Information
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– reorient or relocate the receiving antenna;
– increase the separation between the equipment and
receiver;
– connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
– consult the dealer or an experienced radio/TV technician
for help.
Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult
the dealer or an experienced radio/television technician for
corrective action.
1.4 Bosch notices
Optical elements
Optical elements are sensitive and should be protected at all
times. Do not allow objects to come into contact with glass
surfaces and do not touch optical elements with your fingers.
Copyright
This manual is the intellectual property of Bosch Security
Systems and is protected by copyright.
All rights reserved.
Trademarks
All hardware and software product names used in this
document are likely to be registered trademarks and must be
treated accordingly.
Note
Bosch Security Systems accepts no liability for damage
resulting directly or indirectly from faults, incompleteness or
discrepancies between the user guide and the product
described.
More information
For more information please contact the nearest Bosch Security
Systems location or visit www.boschsecurity.com
Disposal - Your Bosch product was developed and
manufactured with high-quality material and components that
can be recycled and reused. This symbol means that
electronic and electrical appliances, which have reached the
end of their working life, must be collected and disposed of
separately from household waste material. Separate collecting
systems are usually in place for disused electronic and
electrical products. Please dispose of these units at an
environmentally compatible recycling facility, per European
Directive 2002/96/EC
FLEXIDOME micro 1000 - Quick Install
AM18-Q0636
1/2
Analog Camera Menus Setup menu | en 1
1 Setup menu
Press straight down on the button of the control pad to access the SETUP
menu.
– Move the button up or down to move the cursor through the menus.
– Move the button to the right or left to change values.
– When the symbol is shown, press straight down on the button to
select an item or open a submenu.
Navigation items at the bottom of the screen
– To move to the continuation of a menu, select NEXT.
– To return to the previous menu, select BACK or RETURN.
– To save changes, select SAVE ALL.
– To close the SETUP menu, select EXIT.
Menu
Set
Analog Camera Menus Setup menu | en 2
1.1 Main menu
– Camera reset sets all parameters to their factory default values.
SHUTTER/AGC
WHITE BAL
BACKLIGHT
PICT ADJUST
DYN
MOTION DET
PRIVACY
DAY/NIGHT
DNR
CAMERA ID
LANGUAGE
CAMERA RESET
SAVE ALL
Analog Camera Menus Setup menu | en 3
1.1.1 Shutter/AGC (Automatic Gain Control) menu
SHUTTER/AGC AUTO HIGH LUMINANCE
MODE SHUT
BRIGHTNESS 0 - 255
RETURN
LOW LUMINANCE
MODE AGC, OFF
BRIGHTNESS x0.25, x0.50, x0.75, x1.00
RETURN
MANUAL MODE SHUT+AGC
SHUTTER 1/60, 1/120, 1/250, 1/500,
1/1000, /2000, 1/4000, 1/
10000 (NTSC)
1/50, 1/100, 1/250, 1/500,
1/1000, 1/2000, 1/4000, 1/
10000 (PAL)
AGC 6.00, 12.00, 18.00, 24.00,
30.00, 36.00, 42.00, 44.80
RETURN
Analog Camera Menus Setup menu | en 4
1.1.2 White balance menu
– ATW (Auto Tracking White balance: 2,500 K to 8,500 K) and PUSH (Full
pull-in: 1,800 K to 10,500 K) continuously analyze color temperature.
– Use ANTI CR (Anti Color Rolling) when certain types of fluorescent light
cause the picture to periodically change color.
– Use PUSH LOCK with a reference white object filling the screen.
WHITE BAL ATW SPEED 0 - 255
DELAY CNT 0 - 255
ATW FRAME x0.50, x1.00, x1.50, x2.00
ENVIRONMENT INDOOR, OUTDOOR
RETURN
PUSH
USER1 B-GAIN 0 - 255
R-GAIN 0 - 255
RETURN
USER2 B-GAIN 0 - 255
R-GAIN 0 - 255
RETURN
ANTI CR
MANUAL LEVEL 0 - 255
RETURN
PUSH
LOCK
Analog Camera Menus Setup menu | en 5
1.1.3 Backlight menu
– Use BLC (Back Light Compensation) to see a dark object in front of a
bright background.
– Use HLC (High Light Compensation) to darken highlights and avoid
image wash-out (for example, car headlights).
1.1.4 Picture adjust menu
1.1.5 Dynamic range setting menu
– Use DYN (Dynamic range setting) to improve dynamic range by highlight
compression and contrast enhancement.
BACKLIGHT OFF
BLC
HLC
PICT ADJUST MIRROR ON, OFF
BRIGHTNESS 0 - 255
CONTRAST 0 - 255
SHARPNESS 0 - 255
HUE 0 - 255
GAIN 0- 255
RETURN
DYN OFF
LUMINANCE LOW, MID, HIGH
CONTRAST LOW, MIDLOW, MID,
MIDHIGH, HIGH
RETURN
Analog Camera Menus Setup menu | en 6
1.1.6 Motion detection menu
– The ENABLE function sets the regions/blocks where motion detection
does not work.
– To exit the BLOCK DISP ENABLE function, press straight down on the
set button for a longer time.
1.1.7 Privacy masking menu
– Only 4 areas are available if MONITOR AREA of motion detection is on.
MOTION DET OFF
DETECT SENSE 0 - 127
BLOCK DISP OFF, ON, ENABLE
MONIOTR AREA OFF, ON
AREA SEL 1 - 4
TOP 0 - 244 (NTSC), 288 (PAL)
BOTTOM 0 - 244 (NTSC), 288 (PAL)
LEFT 0 - 474 (NTSC), 468 (PAL)
RIGHT 0 - 474 (NTSC), 468 (PAL)
RETURN
PRIVACY OFF
AREA SEL 1 - 8
TOP 0 - 244 (NTSC), 288 (PAL)
BOTTOM 0 - 244 (NTSC), 288 (PAL)
LEFT 0 - 474 (NTSC), 468 (PAL)
RIGHT 0 - 474 (NTSC), 468 (PAL)
COLOR 1 - 8
TRANSP 0.00, 0.50, 0.75, 1.00
MOSAIC OFF, ON
RETURN
Analog Camera Menus Setup menu | en 7
Area selection for motion or privacy masks
Select area 1, 2, 3 or 4.
–Top: extend or reduce upper limit of the detection area.
–Bottom: extend or reduce bottom limit of the detection area.
–Left: extend or reduce left limit of the detection area.
–Right: extend or reduce right limit of the detection area.
1.1.8 Day/night menu
1.1.9 Digital noise reduction menu
1
LEFT RIGHT
TOP RIGHT
BOTTOM
1
reduce extend
DAY/NIGHT AUTO BURST OFF, ON
DELAY CNT 0 - 255
DAY->NIGHT 0 - 255
NIGHT->DAY 0 - 255
RETURN
COLOR
B/W BURST OFF, ON
RETURN
DNR NR MODE OFF, Y
Y LEVEL 0 - 15
RETURN
Analog Camera Menus Setup menu | en 8
1.1.10 Camera identification menu
When ON is selected, a virtual keyboard appears on the screen. Use the
control pad to move to the character you want and select it. Repeat this to
enter the camera ID you desire. You can enter up to 52 characters.
1.1.11 Language menu
CAMERA ID OFF
ON
RETURN
LANGUAGE ENGLISH, JAPANESE, GERMAN, FRENCH, RUSSIAN,
PORTUGUESE, SPANISH, SIMPLIFIED CHINESE

Product specificaties

Merk: Bosch
Categorie: Bewakingscamera
Model: FlexiDome micro 1000

Heb je hulp nodig?

Als je hulp nodig hebt met Bosch FlexiDome micro 1000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Bewakingscamera Bosch

Bosch

Bosch FLEXIDOME IP indoor 4000 IR Handleiding

4 April 2024
Bosch

Bosch VDI-240 Handleiding

4 Januari 2024
Bosch

Bosch BRS-TOW-4100A Handleiding

1 December 2023
Bosch

Bosch BRS-RAC2-8100A Handleiding

1 December 2023
Bosch

Bosch VIP X1 XF Handleiding

1 December 2023
Bosch

Bosch DIVAR IP 5000 Handleiding

1 December 2023
Bosch

Bosch Smart Home Eyes Handleiding

30 Augustus 2023
Bosch

Bosch AutoDome Easy II Handleiding

15 Augustus 2023
Bosch

Bosch AUTODOME 4000 Handleiding

15 Augustus 2023
Bosch

Bosch AutoDome Easy II IP Handleiding

15 Augustus 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Aqara

Aqara Camera Hub G2H Handleiding

28 April 2024
Iiquu

Iiquu Dummy Dome Camera Handleiding

28 April 2024
Sony

Sony SNC-VB640 Handleiding

26 April 2024
Sony

Sony SNC-EB642R Handleiding

26 April 2024
Sony

Sony SNC-VB642D Handleiding

26 April 2024
Sony

Sony SRG-HD1 Handleiding

26 April 2024
Sony

Sony SNC-ZM550 Handleiding

26 April 2024
Sony

Sony SNC-EM642R Handleiding

26 April 2024
Sony

Sony SNC-EM641 Handleiding

26 April 2024
Sony

Sony SNC-ZB550 Handleiding

26 April 2024