Bosch GIC5-27C Professional Handleiding
Pagina's 52 Videocamera
Bekijk de handleiding van Bosch GIC5-27C Professional gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
Operating/Safety Instructions
Consignes d’utilisation/de sécurité
Instrucciones de funcionamiento y seguridad
Call Toll Free for Consumer Information & Service Locations
Pour obtenir des informations et les adresses de nos centres de service après-vente, appelez ce numéro gratuit
Llame gratis para obtener información para el consumidor y ubicaciones de servicio
For English Version
See page 2
●
Version française
Voir page 18
●
Versión en español
Ver la página 34
IMPORTANT
Read Before Using
●
IMPORTANT
Lire avant usage
●
IMPORTANTE
Leer antes de usar
1-877-BOSCH99 (1-877-267-2499) www.boschtools.com
GIC5-27C
-2-
Safety Symbols
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
This is the safety alert symbol. It is used to alert you to po-
tential personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Table of Contents
General Safety Rules ................3
Safety Rules for Inspection Camera.....4
FCC Caution ......................5
Industry Canada (IC)................6
Intended Use......................6
Symbols..........................7
Getting to Know Your GIC5-27C
Inspection Camera . . . . . . . . . . . . . . . 8
Specications .....................9
Assembly........................10
Power Supply..................10
Fitting the Camera Cable .........11
Removing the Camera Cable.......11
Fitting the Mirror, Magnet or
Hook......................11
Operation .......................12
Product Description .............12
Using the Product...............12
Starting Operation ..............13
Main Menu....................13
Saving/Transferring the
Recordings .................14
Working Advice.................15
Maintenance and Service............16
Maintenance and Cleaning ........16
Environment Protection ..........16
Troubleshooting...................16
Errors – Causes and Corrective
Measures ..................16
Accessories ......................17
-3-
General Safety Rules
Read all safety warnings, instructions, illustrations and specifications
provided with this tool. Failure to follow all instructions listed below
may result in electric shock, re and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “tool” in the warnings refers to your mains-operated (corded) tool or battery-
operated (cordless) tool.
1. Work area safety
a. Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
b. Do not operate the tool in explosive
environments, such as in the presence
of ammable liquids, gases or dusts.
Sparks can be created in the tool which
may ignite the dust or fumes.
c. Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
2. Electrical safety
Batteries can explode or
leak, cause injury or fire.
To reduce this risk, always follow all instruc-
tions and warnings on the battery label and
package.
a. DO NOT expose the tool and battery to
rain or wet conditions. Water entering
tool will increase the risk of re and
personal injury.
b. DO NOT short any battery terminals.
c. DO NOT mix battery chemistries.
d. Dispose of or recycle batteries per lo-
cal code.
e. DO NOT dispose of batteries in fire.
f. Keep batteries out of reach of children.
g. Remove batteries if the device will not
be used for several months.
h. Remove the batteries from the tool
when not using it for extended periods.
When storing for extended periods, the
batteries can corrode and self-discharge.
i. The tool is equipped with a radio
interface. Local operating restrictions,
e.g. in airplanes or hospitals, are to be
observed.
j. Prevent unintentional starting. Ensure
the switch is in the off-position before
inserting batteries. Accidental energiz-
ing tool that have the switch on invites
accidents.
3. Personal safety
a. Do not make any modifications to the
tool and battery.
b. Stay alert, watch what you are doing
and use common sense when operating
a tool. Do not use a tool while you are
tired or under the inuence of drugs,
alcohol or medication. A moment of
inattention while operating a tool may
result in serious personal injury or incor-
rect measurement results.
c. Use safety equipment. Always wear
eye protection. Safety equipment such
as dust mask, non-skid safety shoes,
hard hat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
d. Use caution when using tools in the
vicinity of electrical hazar
4. Use and care
a. Use the correct tool for your applica-
tion. The correct tool will do the job
better and safer.
b. Do not use the tool if the switch does
not turn it on and off. Any tool that
cannot be controlled with the switch is
dangerous and must be repaired.
c. Store idle tool out of the reach of chil-
dren and do not allow persons unfamil-
iar with the tool or these instructions
to operate the tool. Tools are dangerous
in the hands of untrained users.
d. Maintain tools. Check for misalignment
or binding of moving parts, breakage of
parts and any other condition that may
SAVE THESE INSTRUCTIONS
Product specificaties
| Merk: | Bosch |
| Categorie: | Videocamera |
| Model: | GIC5-27C Professional |
Heb je hulp nodig?
Als je hulp nodig hebt met Bosch GIC5-27C Professional stel dan hieronder een vraag en andere gebruikers zullen je antwoorden