Bogen WMT1AS Handleiding

Bekijk gratis de handleiding van Bogen WMT1AS (2 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 31 mensen en kreeg gemiddeld 4.2 sterren uit 4 reviews. Heb je een vraag over Bogen WMT1AS of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Line Input/Line Output

Matching Transformer

Model WMT1AS

The WMT1ASis a balanced and isolated impedance matching transformer

with additional features that allow adapting of signal levels between various

audio source and input types. Typical uses are to provide a 600-ohm

balanced input adapter for unbalanced AUX inputs. WMT1AS can also be

used to drive long, balanced, twisted pair cable. This improves noise rejection

and the maximum run length. The WMT1AS can adapt speaker level

signals (25V/70V systems) to a level suitable for the AUX input of an amplifier,

adapt line-level signals down to levels suitable for MIC inputs and can adapt

speaker level signals to MIC level as well. See the drawing below for setting

the Operating Modes.

LINE

SPEAKER

JUMPER

PIN

LINE INPUT

MIC INPUT

JUMPER

PIN

SWITCH

UP

SWITCH

DOWN

OPERATING MODE

SELECTION

Specifications are subject to change without notice.

©2010 Bogen Communications, Inc.

54-2202-01A 1107

SWITCHJUMPER

ADAPT HI-Z AUX INPUT TO 600Ω BALANCED INPUTLINELINE600Ω BAL INPUT*TO AUX LEVEL INPUT

ADAPT LINE LEVEL TO MIC LEVEL INPUTLINEMICTO LINE LEVEL SOURCETO MIC LEVEL INPUT

DRIVE 600Ω BALANCED LINELINELINETO 600Ω BALANCED LINEFROM DRIVE SOURCE

* SHIELD CAN BE CONNECTED TO CENTER TAP, MIDDLE SCREW

**70V OR 25V SPEAKER SYSTEMS

SCREW TERMINALSRCA PLUG

SETTINGS

APPLICATION

Screw Terminal

Mode Select

RCA Plug

Mode Select

Product specificaties