Bogen BC1 Handleiding

Bekijk de handleiding van Bogen BC1 gratis online of download de PDF. 15 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

BC1Beam Clamp

The beam clamp mounting system is designed to provide an easy

and secure way of mounting horn speakers to I-beams.

A)For easier installation, detach the horn base (flange) from the horn

(refer to the speaker’s instruction manual for directions on detaching

the base).

B)Bolt the base [3] to the beam clamp [5] using the supplied bolt [1]

and lock washer [2].

Two bolt lengths are provided. Use the longer bolt for mounting

the cast bases of Bogen’s 15W and 30W horns. Use the shorter

bolt for the stamped bases of the 5W and 7W horns.

A flange hole [4] is provided in the base of later model Bogen

horn speakers. For earlier model horns without this hole or

non-Bogen horns, drill a /8” hole in the base.3

NOTE: It is important to use the correct length bolt or else

the clamp or base will not seat properly.

C)Fasten the beam clamp assembly to the web of an I-beam and tighten

the clamp bolt [6] well to secure the horn’s mounting base in place.

D)Place the horn speaker onto its base and finish the electrical

installation and positioning.

Specifications subject to change without notice.

54-9218-01D 0902

www.bogen.com

Beoordeel deze handleiding

Product specificaties

Als je hulp nodig hebt met Bogen BC1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden