Bogen TB8 Handleiding

Bekijk gratis de handleiding van Bogen TB8 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 23 mensen en kreeg gemiddeld 4.8 sterren uit 7 reviews. Heb je een vraag over Bogen TB8 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Ceiling Speaker Enclosure & Tile Bridge

Models RE84 and TB8

Installation and Use Manual

ULLISTED (UUMW) Flush-Mounted Loudspeaker Installation

For Use In Return Air Ceiling Plenum Spaces

Enclosures (UL Listed)RE84

Intended for use with:TB8 (Tile Support Bridge)

•Listed by Underwriters Laboratories, Inc. Category UUMW.

Material and construction permits use where ceiling plenum is

part of the air handling system.

•Compound knockout(s) provided for listed type metallic type

ttings for 1/2" and 3/4" plenum rated cable and plenum whip ex

conduit.

•Four horseshoe tab slots provided on each enclosure to mate with

four horseshoe tabs on TB8 bridge eliminates the need for

screws.

•Two seismic tie-off tabs and four tie-o tab slots with enclosure.

RE84 Features

RE84

TB8

©2004 Bogen Communications,Inc.

All rights reserved.

Specifications subject to change without notice.

54-2 08-0 A04041 1

•Distributes the weight of a speaker, grille, and protective

enclosure onto the ceiling grid.

•Four locator tabs to prevent sliding on ceiling tile.

•Four horseshoe tabs to mate with four horseshoe tab slots on

enclosure.

TB8 Features

AListed assembly requires that the enclosed loudspeaker is not

exposed within the air handling plenum. Wiring, and/or conduit

enclosure entry ttings, and installation must comply with local codes.

Many local codes require a separate enclosure assembly with

customer-supplied "tie-o" wire to secure the assembly to the top of

the building structure.

NOTE: All cable splices and connections to Speaker/Transformer

pigtails must be made inside of Listed enclosure.

NOTE: When the RE84 and the TB8 are installed together,

the clearance holes on the TB8 are used during installation.

However, when the TB8 is installed without the RE84, the

threaded holes on the TB8 are used during installation.

Product specificaties