Bogen WB1EZ Handleiding

Bekijk gratis de handleiding van Bogen WB1EZ (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 63 mensen en kreeg gemiddeld 4.7 sterren uit 7 reviews. Heb je een vraag over Bogen WB1EZ of wil je andere gebruikers van dit product iets vragen? Stel een vraag

A=10 feet

Easy Design

TM

Speaker

Model WB1EZ

Speaker Layout

The layout of the speakers should be planned prior to

installation. Because wall baffle speakers are designed

to project forward, it is best to aim them in the same

direction, as this provides for both greater coverage and

clarity. You can use the buildingʼs roof pillars or other

available supports for mounting the wall baffles.

In some cases, it may be necessary to mount the wall

baffles on opposing walls. In these cases, the speakers

will project sound in opposing directions.

HALLWAY/ROOM - Wall baffle speakers work well with

rooms and hallways that are 20ʼ to 60ʼ wide. Layout

starts at one end of the hallway or room. The first

speaker should be installed 10ʼ from the end of the

hallway or room. The next speaker on that wall should

be installed 20ʼ from the first speaker, as should any

additional speakers required to cover the length of the

hallway or room.

The first speaker on the opposing wall should be

installed 20ʼ from the end of the hallway or room, there-

by staggering the speakers. Each additional speaker

should also be installed 20ʼ apart from the previous one.

See Figure 1.

OPEN AREA -The number of speakers needed to

cover an open area and the layout of those speakers is

contingent upon the availability of suitable mounting

points in the area to be covered.

Layout starts in one corner of the room. The first speaker

should be installed 10ʼ from the wall with each addition-

al speaker in the first row installed in increments of

20ʼ from the first. Based on , install the nextFigure 2

row of speakers 30ʼ from the first row and 20ʼ from the

wall with increments of 20ʼ between each speaker.

The third row would follow the example of the first and

each additional row would continue this pattern of alter-

nating rows until the whole area is covered.

Figure 2

Figure 1

20’ to 60’

10’

20’

SPEAKER

WALL

A

B

SPEAKER

START

START

B=20 feet

54-5069-01B 1209

© 1999 Bogen Communications Inc. All rights reserved.

Specifications subject to change without notice.

Product specificaties