Blaupunkt SRAC-S1 Handleiding

Blaupunkt Alarmsysteem SRAC-S1

Bekijk gratis de handleiding van Blaupunkt SRAC-S1 (718 pagina’s), behorend tot de categorie Alarmsysteem. Deze gids werd als nuttig beoordeeld door 142 mensen en kreeg gemiddeld 4.8 sterren uit 8 reviews. Heb je een vraag over Blaupunkt SRAC-S1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PDF downloaden

Pagina 1/718

Wireless AC Powered Indoor Siren (SRS1)AC-

PPaarrttssDDeessccrriippttiioonn

1. LED Indicator / Function Button

Press once to transmit a test code.

Press and hold for 3 seconds to change audio indication beep

volume (High or Low).

Press and hold for 10 seconds to enter learning mode.

2. Plug

1. Plug the Siren into the power outlet. The Siren will emit 2

beeps

2. Put the Control Panel into learning mode.

3. Press and hold the Learn button for about 10 seconds and

release. The Siren will transmit a learn signal and emit a beep;

the LED will also begin to flash.

4. Refer to Control Panel manual to complete learning process.

5. If learning is successful, the LED will flash twice then turn off;

the Siren will emit two beeps to confirm.

6. If learning is unsuccessful, press the learn button once to stop

LED flashing and restart from Step 3.

1. Plug the Siren into power socket to supply power

2. Put your Control Panel into Walk Test mode

3. Press the Function button on the Siren once to transmit a test

code.

4. If the Control Panel receives the test code, it will respond

accordingly to indicate the Siren can function properly at

chosen location

If the Co ntrol Panel fails to receive the test code,it means the

Siren is outside Control Panel signal range,relocate the Siren

until the Control Panel could receive the signal properly.

The 95Siren produces a minimum of dBA sound pressure at 1

meter range when activated.

For Burglar and Panic Alarm, the Siren gives a continuous alarm

sound.

For Fire / Water alarm, the Siren givesan intermittent alarm

sound of 2sec siren followed by a 1 sec interval. -

The Siren is silenced when either the programmed Control Panel

alarmlength expires or when theis disarmed to Control anel P

turn off the S iren.

Audio Status Indication Table

The Siren will sound indication beeps according to different status,

please refer to table below.

Arm/Home 1 beep*

Disarm 2 beeps*

Previous alarm

warning 3- second alarm

Entry/Exit Sound Count-down beeps

* Siren Audio indication will be effected by the Confirmation

ON / OFF setting in your Control Panel settings.

The Siren has a builtin backup battery which will be activated -

when the Siren is disconnected from AC power. The battery will

be charged automatically when the Siren isplugged into a power

socket.

When the Siren is unplugged from the power socket, it will

transmit an AC failure signal to the Control Panel to notify the

situation.

- -10°C to 40°C, relative humidity 85% noncondensing.

868 MHz

OOppeerraattiioonn

Beoordeel deze handleiding

4.8/5 (8 Beoordelingen)

Product specificaties

Merk:	Blaupunkt
Categorie:	Alarmsysteem
Model:	SRAC-S1
Kleur van het product:	Wit
Soort:	Draadloze sirene
LED-indicatoren:	Status
Levensduur batterij/accu:	2.5 jaar
Ondersteund aantal accu's/batterijen:	4
Geluidsdrukniveau:	95 dB
Frequentie:	868 MHz
Afmetingen (B x D x H):	83 x 63 x 95 mm
AC-ingangsspanning:	230 V
Bedrijfstemperatuur (T-T):	-10 - 45 °C
Batterijtechnologie:	Alkaline
Type batterij:	D
Plaatsing beschikbaar:	Binnen
Aantal alarmgeluiden:	3