Black Box LES422A Handleiding

Black Box Server LES422A

Lees hieronder de 📖 handleiding in het Nederlandse voor Black Box LES422A (2 pagina's) in de categorie Server. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com

Page 5 Page 6

Black Box and the Double Diamond logo are registered trademarks of

BB Technologies, Inc. UL is a registered trademark of Underwriters

Laboratories. Any other trademarks mentioned in this manual are

acknowledged to be the property of the trademark owners.

Quick Start Guide

2-Port Hardened Serial Server

LES422A

Black Box Tech

Support: FREE! Live.

24 /7. Tech support

the way it should be.

Great tech support is just 30 seconds

away at 724-746-5500 or blackbox.com.

Order toll-free in the U.S.:

Call 877-877-BBOX

(outside U.S. call 1-724-746-5500)

FREE technical support

24 hours a day, 7 days a week:

Call 724-746-5500 or

fax 724-746-0746

Mailing address:

Black Box Corporation

1000 Park Drive

Lawrence, PA 15055-1018

Web site: www.blackbox.com

E-mail: info@blackbox.com

Customer

Support

Information

LES422A Quick Start Guide

Step 12. Save and logout.

• If you have completed the configuration, click

“Save” to save the configuration to the serial server.

• To logout, click the “Logout” button.

Step 13. Test and verify operation.

• Set up serial server as a TCP server on serial port 1.

• Set serial port to RS-232 on serial port 1.

• Set to 9600, 8, N, 1 on serial port 1.

• Loopback serial port 1 by connecting TD to RD.

• Open a DOS window and type “telnet x.x.x.x yyyy,”

where “x.x.x.x” is the IP address of the serial server

and “yyyy” is the port number of the serial port.

• Type characters on the keyboard. The characters

should appear in the window. If not, double-check

your settings.

Step 1. Check for all required hardware.

Your package includes:

• 2-Port Hardened Serial Server

• CD-ROM containing software

• This Quick Start Guide

You will also need:

• Network and serial cables (not included)

• Power supply (not included)

Step 2: Install the hardware.

• Connect a 10- to 48-VDC (58 VDC max.)

power supply (6.0 W required).

• Connect the network cable from the

Hardened Serial Server to a network drop

using a standard serial cable.

• Connect the serial device(s) to the (2) RS-232

DB9 serial connectors with a straight-through

cable for a DCE device or a null-modem cable

for a DTE device.

NOTE: UL® requires one conductor per terminal,

28 to 16 AWG copper-wire, tightening

torque of 5 kg-cm, and 105° C rating

sized for 60° C ampacity.

LES422A Quick Start Guide, rev. 1

724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com

LES422A Quick Start Guide LES422A Quick Start GuideLES422A Quick Start Guide

Page 4

Step 5. Install Black Box Hardened Serial Server

software.

• Insert the included CD and it should autostart.

• Follow the prompts to install the software.

NOTE: Make sure you have administrative rights and

disable firewalls.

Step 6. Set up Black Box Hardened Serial Server

software.

• Open the software. “Click Start—>Programs—>

Black Box—> Serial Server Software.” The

• To configure via the network, select “Network.”

• If you know the IP address, select “The device is at

• Click “Connect.”

Step 6. Set up the Web interface.

• Open a browser and type the IP address of the

Hardened Serial Server into the address bar.

• When the serial server is found, the “Configuration”

Step 7. Login.

• Click “Login.” (The password is blank from the

factory.)

• The “General” page appears.

Step 8. Set up the network.

• The Hardened Serial Server is set at the factory to

receive an IP assignment from a DHCP server. If a

DHCP server is not available on your network, it will

169.254.102.39

• If this address does not work with your PC, change

- IP Address = 169.254.102.1

- Subnet Mask = 255.255.255.0

- Default Gateway = 169.254.102.100

• If you need to use different settings, refer to the

Step 9. Set up the serial port parameters.

• Click “Port 1 Serial” to open the Serial Port

(RS-232, RS-422, RS-485 2-wire, or RS-485 4-wire).

• Select the baud rate, data bits, stop bits, parity, and

tep 10. Set up the port network parameters.

• Click “Port 1” network to open the “Port Network

• Select the type of network protocol you want to

use: TCP, UDP, VCOM, or Paired Mode.

• If you select TCP, choose whether the Hardened

configure the required IP address, port numbers, and

• If you select UDP, configure the IP addresses, ports

• If you want the serial server to act as a virtual

communications port for a computer, select VCOM.

physical COM port.

• If you want the serial server to operate in Paired

parameters (similar to setting up TCP).

Step 11. Set up advanced parameters.

• If you want to setup Advanced parameters, click

“Advanced” on the Port Network Parameters page.

• If necessary for your application, select “I want to

network,” then set up the Character Count, Forced

Delimiter Removal as required.

• Click “Next.”

Step 3: LED status.

LED Status

Ready

ON when port is open; blinks when data present on serial port.

ON when device is operating in 100BASE-TX mode. Blinks

Step 4: Mode switch.

Hold in Mode switch for… Result

More than 10 seconds Resets to factory defaults.

Product specificaties

Merk:	Black Box
Categorie:	Server
Model:	LES422A
Kleur van het product:	Zwart
Gewicht:	100 g
Internationale veiligheidscode (IP):	IP30
LED-indicatoren:	Ja
Soort serieële aansluiting:	RS-232/422/485
Aantal Ethernet LAN (RJ-45)-poorten:	1
Certificering:	CE, UL, NEMA TS-2
Ingangsspanning:	10 - 58 V
Bekabelingstechnologie:	10/100Base-T(X)
Ondersteunt Windows:	Windows 2000,Windows 7,Windows Vista,Windows XP Home,Windows XP Home x64,Windows XP Professional,Windows XP Professional x64
Stroomverbruik:	4000 mA
Ondersteunde server operating systems:	Windows Server 2003,Windows Server 2008
Afmetingen (B x D x H):	81 x 119 x 30 mm
Seriële poort(en):	2
Bedrijfstemperatuur (T-T):	-40 - 80 °C