Black And Decker WP1500K Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Black And Decker WP1500K (6 pagina's) in de categorie Polijstmachine. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
Australia
New ZealandWP1500K-XE
5
4
3
1
2
2
1. Work area safety
a. Keep work area clean and well lit.
b. eratDo not op e we ls ipo r too n explosive atmos erph es,
such as in the presence of flammable liquids, gases
or dust.
c. Keep children and bystanders away while operating
a wepo r l.too
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
th uge pl i a y wan n y. se a y aDo not u n da er pl thpt ugs wi
earthed (grounded) power tools.
b. Avoid t ed bod onty c ac wi eath rth or ground urfed s aces
such as pipes, radiators, ranges and refrigerators.
c. r r n Do not po po ex se we too tols ai or ond on we ct iti s.
d. N r u ,Do not bu th ord a se e c . eve se e cth ord for rr ng ca yi
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
NOTE:
3. Personal safety
a. tch hat r iSt rtay ale , wa w y aou e do ng nd a u o onse c mm
se se wn hen erati r op ng po a we too Do notl. use a wepo r
too oul w ile yh a e r tired or und th nfer e i luen s,ce of drug
alcohol or medication.
b. Use personal protective equipment. Always wear
eye protection.
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
d. Remove any adjusting key or wrench before turning
the power tool on.
e. Do not overreach. Keep proper footing and balance at
at all times.
f. erlyDr propess . weaDo not r l se cl jewelleoo oth ng ori ry.
K p h ree your ai , cl a ves away m m vioth ngi nd glo fro o ng
parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
4. Power tool use and care
a. r Do not for th poce e we too th orr pol. se U e c ect wer tool
for our pp on y a licati .
b. u r f Do not se e weth po tool i th do not turne switch es it
on and off.
c. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools.
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
Intended use
Safety instrctions
General power tool safety warnings
Warning! Read all safety warnings and all
instructions.
Save all warnings and instructions for future reference.
The term “power tool” in all of the warnings listed below
refers to your mains operated (corded) power tool or
battery operated (cordless) power tool.
ENGLISH
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use.
3
ENGLISH
f. K p iee cutt ng too ls sharp nd a clean.
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts.
6. Electrical safety
Warning!
7. Labels on tool
Access ies mor ust be rated tfor a least the speed recommended
on the tool warning label.
Hold tool by insulated gripping surfaces when performing
an operation where the polishing tool may contact hidden
wiring or its own cord.
Avoid prolonged contact with dust from power
sanding, sawing, grinding, drilling, and other
construction activities. Wear protective clothing and
wash exposed areas with soap and water.
Caution!
OFF
Caution!
Caution!
Specific safety rules
b. The tool always is supplied via residual current
device with a rated residual current of 30mA or less.
Warning!
FEATURES
MOTOR
Warning!
Instalation
Assembly and adjustment


Product specificaties

Merk: Black And Decker
Categorie: Polijstmachine
Model: WP1500K
Kleur van het product: Black, Orange
Gewicht: - g
Snoerlengte: 2 m
Stroombron: AC
Soft grip: Ja
Input vermogen: 1300 W
Stationair toerental (max): 3000 RPM
Aanpasbare snelheid: Ja
Aantal greepposities: 3
Asvergrendeling: Ja
Grinding disc diameter: 180 mm
Stationair toerental (min): 1000 RPM

Heb je hulp nodig?

Als je hulp nodig hebt met Black And Decker WP1500K stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Polijstmachine Black And Decker

Handleiding Polijstmachine

Nieuwste handleidingen voor Polijstmachine