Binatone E3300 Twin Handleiding

Binatone Telefoon E3300 Twin

Lees hieronder de 📖 handleiding in het Nederlandse voor Binatone E3300 Twin (25 pagina's) in de categorie Telefoon. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/25

Important note — emergency calls

The 3300 is not designed for making emergencye

calls when the mains power fails. So you should

make alternative arrangements for access to

Emergency Services.

(This means that you should also have a basic

phone that does not need mains power, connected

to your line so that you can make calls during a

power failure.)

If you need help …

The Binatone Help Line is available from 9.00 am to

5.00 pm, Monday to Friday, on

01325 304 473

Unpacking your e3300

In the box are:

■the (one for a Single system,cordless handset

two/three for a Twin/Triple system)

■the base unit

■rechargeable and a batteries battery

compartment cover for each handset

■a for the base unittelephone line cable

■a for the basemains power lead and adapter

unit

■if you have a Twin or Triple system, one or two

charger pods, each with a separate mains

power lead and adapter.

Keep the packaging materials in a safe place in

case you later need to transport the unit.

Keep your sales (till) receipt, which is your

guarantee.

Downloaded from manuals search enginewww.Manualslib.com

Where to find it

Before you can use the handset to make calls

you will need to fit and fully charge the

batteries, as described on pages 4 and 5.

Please read the notes on pages 2 and 3

before you install the base unit.

LNR/ CDS/ PAUSE button

Press ONCE to make a repeat call

to one of the last five numbers

you dialled.

Press TWICE to see a list of Caller

Display records.

Press to generate pauses when

using the phone on a PBX.

INT ( ) button✱

Press to make an

intercom call.

PROG button

Press to start programming.

Press during a call to make a

note of a number in the

Notebook.

HANG UP / C (Cancel) button

1 second

3 seconds

Press to hang up at the end of a call.

Press for to lock the keypad;

or for to turn the handset

on and off.

While dialling or programming,

press briefly to delete digits from

the display; or press and hold to

clear the display.

UP and DOWN buttons▲ ▼

Press during a call to adjust the volume

in the earpiece.

Press to move through the list of stored

numbers or Caller Display records.

R (Recall) button

You may need this

during a call if your

3300 is connected to a

PBX, or if you use BT’s

Select Services.

MEMORY button

Press to store numbers in

memory and to make

calls to stored numbers.

HANDSET LOCATOR button

Press to make all registered

handsets ring, (useful if

you've forgotten where you

put a handset).

SCROLL ( ) buttons✱#

When a long number

(more than 16 digits) is

shown on the display,

press these to scroll along

the digits.

IN USE light

This comes on when you

have a connection to the

telephone line.

PHONE /OK button

Press to begin or answer a

telephone call.

Press while programming to

confirm your selection.

If the display is blank

Press the button

to switch the handset on

When this shows ‘nearly empty’ ( ), put the handset onto

the base unit or charger pod as soon as possible, to charge

the batteries. While the batteries are being charged, this

mbol blinks.

Symbols on the display

The handset’s

number (1 if you

have a single system,

1, 2 or 3 if you have

a Twin or Triple

system)

The time is shown if you’ve

set the handset’s clock

The base unit’s number (1,

unless you have registered

your handset to more than

one base unit)

Intercom

call

Memory/

store

Indirect

network

Redialling

Caller

Display

This appears when the handset is dialling a non-local

number via an alternative network.provider’s

This appears when you’re using Last Number Redial.

This appears when you’re checking, or dialling from, the list

of Caller Display records.

This appears when the keypad is locked, or when you’re

trying to dial a barred number.

This flashes while your handset is ringing for an intercom call,

and comes on steadily when the call’s connected.

This comes on when you’re storing numbers in memory, and

when you’re making calls to stored numbers.

Keypad

locked

Signal

level

This shows the strength of the signal between the handset

and base unit. It flashes while the handset is trying to

establish a radio link .

to the base unit If this symbol flashes

while you’re on a call, move closer to the base unit

Battery

charge

level

New call This appears when you missed incoming calls (even if you

do not use Caller Display).

What the symbols mean

The duration of each call is shown on the display from 20 seconds

after you press the PHONE button for a line, until 5 seconds after

you end the call.

Downloaded from manuals search enginewww.Manualslib.com

CONTENTS

Read these notes first 3

Choosing a site for the base unit and

charger pod 3

Radio signals between handset and

base unit 3

Mains power connection 3

Installation and set-up 4

Before you start 6

Electrical safety 6

Interference 6

‘Out of range’ warning 6

Switching on and off 7

To switch the handset on and off 7

To lock the keypad 7

Making and answering calls 8

To make a call 8

To answer a call 8

To end a call 8

Earpiece volume 8

Last Number Redial (LNR) 9

Memory dialling 10

To store a number 10

To make a memory call 11

Chain dialling 11

To change a stored number 11

To delete a stored number 12

To use the notebook 12

To store an LNR number in

memory 13

Caller Display 14

To check Caller Display records 14

To return a call 15

To delete Caller Display records 15

To store a Caller Display number in

memory 15

Using a multi-handset system 16

To make an intercom call 16

To answer an intercom call 17

To end an intercom call 17

To transfer a call 17

To shuttle between two calls 18

Three-way conference 18

New Call tone 19

To page all handsets from the

base unit 19

To register a new handset to your

base unit 20

To de-register a handset 21

To select a base unit 21

To register to a different brand of

base unit 22

Customising — general points 22

Customising your handset 23

The handset’s PIN code 23

Auto-answer 23

Ringer volume and melody 24

Key tone 24

Direct Call 25

To clear all memories 26

To reset the handset 26

Continued overleaf …

Binatone Help Line: 101325 304 473

Downloaded from manuals search enginewww.Manualslib.com

Product specificaties

Merk:	Binatone
Categorie:	Telefoon
Model:	E3300 Twin

Heb je hulp nodig?

Als je hulp nodig hebt met Binatone E3300 Twin stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Telefoon Binatone

Binatone Caprice 600 Handleiding

22 Mei 2023

Binatone IDECT X5i Handleiding

2 Mei 2023

Binatone Solas 1500 Handleiding

28 April 2023

Binatone Lyris 410 Handleiding

10 April 2023

Binatone IDECT Eclipse Plus Handleiding

9 April 2023

Binatone Trend 2 LCD Handleiding

4 April 2023

Binatone Lifestyle 1910 Handleiding

25 Maart 2023

Binatone E3300 Twin Handleiding

25 Maart 2023

Binatone MD 2000 Handleiding

23 Maart 2023

Binatone Lyris 310 Handleiding

18 Maart 2023

Handleiding Telefoon

Nieuwste handleidingen voor Telefoon

Samsung SGH-E490 Handleiding

16 April 2024

Gamdias Pheme M1 Handleiding

16 April 2024

Tador KX-T927-MT Handleiding

13 April 2024

Essentiel B Nivalis 15.1 Handleiding

9 April 2024

Essentiel B Nivalis 15.2 Handleiding

9 April 2024

Geemarc PhotoPHONE 110 Handleiding

9 April 2024

Lindy 42980 Handleiding

9 April 2024

Geemarc SOS-PRO 595 Handleiding

9 April 2024

Geemarc ClearSound CL60 Handleiding

8 April 2024

Geemarc DALLAS10 Handleiding

8 April 2024