Binatone Spirit 110 Handleiding

Bekijk gratis de handleiding van Binatone Spirit 110 (2 pagina’s), behorend tot de categorie Telefoon. Deze gids werd als nuttig beoordeeld door 113 mensen en kreeg gemiddeld 4.3 sterren uit 7 reviews. Heb je een vraag over Binatone Spirit 110 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

9. P(Pause) button

Spirit 110

Unpackingyourphone

Corded Telephone

1. Where to find it

2. Installation

1.Locating the Base unit

The Base unit should be placed on a level surface, in a position where:

the telephone line cable will reach your telephone line socket or

extension socket.

it is not close to a sink, bath or shower, or anywhere else where

it is not close to other electrical equipment - fridges, washing

machines, microwave ovens, TVs, fluorescent lights, etc.

2. Plug the coiled handset

cord into the Handset.

Plug the other end into

the jack on the left

side of the Base unit.

3.Place the Handset in

the Base unit.

4.

5.

Lift the Handset and check for Dial tonein the earpiece.

Always use the

telephone line

cord supplied

with your

Spirit 110 phone.

Other telephone

line cords may

not work.

Make sure the plugs

click into place.

to Modular

Wall jack

2. Installation

it might get wet.

Making a

1Lift the Handset, listen for a dial tone.

2Dial the telephone number you wish to call.

3

To end the call, return the Handset to the

call

Lift the handset to answer call.

To answer a

call

Replace the Handset on the Base unit cradle.

To end a call

3. Telephone Operation

Base unit.

Last Number

1

Lift the Handset to redial the last number.

2Press LNR button.

Redial

ÖThe phone automatically dials the last

number you called (maximum of 32 digits).

Mute

During a call press and hold the(MUTE)

button.

Function

ÖWhen the mouthpiece is muted, the person

at the other end of the call cannot hear you

but you can hear his side.

2

To get back to the call, release the

button.

Use on PBX

Press R (RECALL) button on your

If you are using your Spirit 110 phone on a

RECALL;

(MUTE)

Spirit 110 phone.

PBX,and the PBX user guide tells you to press

Inserting a

Pressing PAUSE button immediately after the

Pause in

For some switchboard system, an access

the dialing

sequence

access number, a pause of about 3.6 seconds

will be entered, and the desired number can

Press PAUSE button to insert a pause when

dialing or storing Long Distance Access Codes.

Telphone Operation continue...

1

2

be dialed immediately.

number must be dialed (usually an 8 or 9) to

get another dial tone and an outside line.

In the box you will find:

• Base Unit

• Handset

• Coiled Handset cord

• Telephone line cord

for Base unit

• User manual

Keepthepacking

materials ina safe

place in case you later

need to transport

Keep your sales (till)

receipt, which is your

guarantee.

the unit.

3. STO (Store)button

4. MEM button

1

7

8

2

3

4

5

6

1. is ringing

for an incoming call.

Ringer light

- This flashes when the phone

2. M1,M2 and M3 one -Touch Memory Buttons

5. LNR(Last Number Redial) button

6. Mute button

7. R(Recall) button

8. P(Pause) button

Plug one end of the telephone line cord the jack at the back of the

base unit and the other end into modular wall jack.

Product specificaties