Behringer Ultra Metal UM300 Handleiding

Bekijk gratis de handleiding van Behringer Ultra Metal UM300 (24 pagina’s), behorend tot de categorie Gitaar. Deze gids werd als nuttig beoordeeld door 74 mensen en kreeg gemiddeld 4.2 sterren uit 8 reviews. Heb je een vraag over Behringer Ultra Metal UM300 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Thank you for showing your condence in us by purchasing the

Behringer ULTRA METAL UM300. This high-quality eects pedal comes

with a dual-gain circuitry that enables you to produce super thick, tube-

like distortion plus endless sustain. Thanks to its high-performance

features you will achieve the most extreme and sought-after hard rock

or heavy metal distortion sounds.

1. Controls

(1) The control allows yu to boost/cut the lo-frequency range.LOW

◊

◊

◊

◊◊ Please keep in mind that extrme distortion and EQ

settings will increase nose and may induce oscillation.

(2) The two (uency) controls allow to boost/cut a dè ned MID FREQ

mid-frequency range. The upper control is used to increase

or lower the mid range, the cntrol below adjusts the center

frequency of the mid range that is aected (200 Hz to 5 kHz).

(3) The LEVEL control adjusts the output level.

(4) The LED illumnates when the eect is activated. It also ON/BATT

serves as a battery leve indicator.

(5) Use the footswitch to activate/deactivate the eect.

(6) Use this ¼" TS connector to plug in the instrument cable.IN

(7) The ¼" TS connector sends the signal to your amp. OUT

Use the connection to plug in a 9 V power supply (not included). DC IN

The BATTERY COMPARTMENT is located underneath the pedal cover.

To install or replace the 9 V battery, press the hinges with a ballpen and

remove the pedal cover. Be careful not to scratch the unit.

V .01

ULTRA METAL UM300

Heavy Metal Distortion Eects Pedal

(3)

(1) (5)

(4)

(7)

(2)

(8)

(6)

(9)

Product specificaties