Behringer Overdrive Distortion OD300 Handleiding

Behringer Gitaar Overdrive Distortion OD300

Lees hieronder de 📖 handleiding in het Nederlandse voor Behringer Overdrive Distortion OD300 (23 pagina's) in de categorie Gitaar. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/23
OVERDRIVE/DISTORTION OD300
2-Mode Overdrive/Distortion Eects Pedal
Thank you for showing your condence in us by purchasing the
Behringer OVERDRIVE DISTORTION OD300. This eects pedal is ideally
suited for electric guitars. Thanks to its high-performance features you
can create state-of-the-art overdrive, distortion or a combination of
both eects.
1. Controls
(1) The LEVEL control adjusts the output level.
(2) The control allows you to shape your overall sound.TONE
(3) The control adjusts the intensity of the overdrive/DRIVE
distortion eect.
(4) Use the control to adjust the balance between overdrive MODE
and distortion eect. In leftmost position you got pure overdrive
eect and in the rightmost position you get pure distortion.
(5) The LED illuminates when the eect is activated. It also ON/BATT
serves as a battery level indicator.
(6) Use the footswitch to activate/deactivate the eect.
(7) Use this ¼" TS connector to plug in the instrument cable.IN
(8) The ¼" TS connector sends the signal to your amp.OUT
Use the connection at the front of the unit to plug in a 9 V power DC IN
supply (not included).
The is located underneath the pedal cover. BATTERY COMPARTMENT
To install or replace the 9 V battery, press the hinges with a ballpen and
remove the pedal cover. Be careful not to scratch the unit.
The OD300 has no on/o switch. As soon as you insert the
jack into the in connector, the OD300 begins running. When
not using the OD300, remove the jack from the in connector.
This extends the life of the battery.
V 1.0
(5)
(1)
(8)
(6)
(3)(2)
(4)
(7)
2OVERDRIVE/DISTORTION OD300
The is located on the bottom.SERIAL NUMBER
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualied servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.
3. Limited Warranty
For the applicable warranty terms and conditions and additional
information regarding Music Tribe’s Limited Warranty, please see
complete details online at musictribe.com/warranty.
4. Specications
In
Connector ¼" TS
Impedance 500 k
Out
Connector ¼" TS
Impedance 1 k
Power Supply
9 V 𝌂, 100 mA regulated
Behringer PSU-SB
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50 Hz
U.K./Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Power connector 2 mm DC jack, negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Physical/Weight
Dimensions approx. 2 ⁄ x 2 ¾ x 4 "
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs / 0.33 kg
Behringer is constantly striving to maintain the highest professional standards. As a result of
these efforts, modifications may be made from time to time to existing products without prior
notice. Specifications and appearance may therefore differ from those listed or shown.
3OVERDRIVE/DISTORTION OD300
Muchas gracias por la conanza que has depositado en nosotros al
adquirir el OVERDRIVE DISTORTION OD300 de Behringer. Este pedal
de efectos es ideal para guitarras eléctricas. Sus caractesticas
excepcionales te permiten crear un soberbio overdrive o distorsión, o
una combinación de ambos efectos.
1. Controles
(1) LEVEL regula el nivel de salida.
(2) El control te permite moldear el sonido a tu gusto.TONE
(3) DRIVE regula la intensidad del efecto de overdrive/distorsión.
(4) El control te permite ajustar el balance entre los efectos MODE
de overdrive y distorsn. Si está girado completamente hacia
la izquierda, el efecto de overdrive estará al máximo, y si está
completamente a la derecha,lo tendrás distorsión.
(5) El LED se ilumina al activar el efecto, y también sirve ON/BATT
como indicador de la carga de la batería.
(6) Al presionar el pedal se activa/desactiva el efecto.
(7) Entrada jack de 6,3 mm para conectar tu instrumento.
(8) Salida jack de 6,3 mm para enviar la señal al amplicador.
El conector te permite enchufar a tu pedal un adaptador de DC IN
corriente de 9 V (no incluido).
El COMPARTIMENTO DE LA BATERÍA se encuentra debajo de la cubierta
superior del pedal. Para instalar o cambiar la batería de 9 V, presiona
las bisagras laterales con un bolígrafo y retira la cubierta del pedal. Ten
cuidado de no rayar la unidad.
El OD300 no dispone de un interruptor de encendido/
apagado. Tan pronto conectas tu instrumento en la entrada
IN, el OD300 comienza a funcionar. Si no vas a utilizar el
pedal, desconecta el cable de la entrada IN para prolongar
la vida de la batería.
El se encuentra en la parte inferior del pedal.MERO DE SERIE
2. Instrucciones de Seguridad
No utilizar ni instalar cerca de agua o fuentes de calor. Utiliza sólo
accesorios y aditamentos autorizados. No intentes reparar el producto
por ti mismo. Contacta a nuestro personal cnico cualicado para
servicio y reparaciones, especialmente cuando la fuente o el cable de
alimentación hayan sufrido aln daño.
3. Garantía Limitada
Si quiere conocer los detalles y condiciones aplicables de la garana así
como información adicional sobre la Garana limitada de Music Tribe,
consulte online toda la información en la web musictribe.com/warranty.


Product specificaties

Merk: Behringer
Categorie: Gitaar
Model: Overdrive Distortion OD300

Heb je hulp nodig?

Als je hulp nodig hebt met Behringer Overdrive Distortion OD300 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden