Axxess AXTC-MB3 Handleiding

Bekijk gratis de handleiding van Axxess AXTC-MB3 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.7 sterren uit 3 reviews. Heb je een vraag over Axxess AXTC-MB3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AXTC-MB3

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 11/16/23 INSTAXTC-MB3

ATTENTION: With the key out of the ignition, disconnect

the negative battery terminal before installing this

product. Ensure that all installation connections,

especially the air bag indicator lights, are plugged in

before reconnecting the battery or cycling the ignition to

test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

TABLE OF CONTENTS

Connections: LD-SWCX-MB3 .................................2

Programming .........................................................3

Troubleshooting.....................................................4

Connector View ......................................................4

Mercedes SWC (Steering Wheel Control)

and Data Interface 2016-2021

INTERFACE FEATURES

• Designed for non-amplified models

• Provides accessory power (12 volt 10-amp)

• Provides wires for multimedia radios (park brake, reverse, speed sense)

• Retains audio controls on the steering wheel

• Designed to be compatible with all major radio brands

• Auto detects vehicle type, radio connection, and preset controls

• Ability to dual assign steering wheel control buttons

• Retains memory settings even after battery disconnection or

interface removal (nonvolatile memory)

• Provides illumination output

• Micro-B USB updatable

INTERFACE COMPONENTS

• AXTC-MB3 Interface

• LD-SWXC-MB3 Harness

• 3.5mm Adapter

APPLICATIONS

Mercedes

C Class .................................................................................. 2016-2021

ML/GL ................................................................................... 2016-2021

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors or

• Solder gun, solder, and heat shrink

• Tape

• Wire cutter

• Zip-ties

• Multimeter

Visit AxxessInterfaces.com for more detailed information

about the product and up-to-date vehicle specific applications.

Product Info

Product specificaties