Axxess AXSUB-FD3 Handleiding

Bekijk gratis de handleiding van Axxess AXSUB-FD3 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.4 sterren uit 3 reviews. Heb je een vraag over Axxess AXSUB-FD3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTALLATION INSTRUCTIONS

AXSUB-FD3

AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/5/25 AXSUB-FD3

INTERFACE COMPONENTS

• AXSUB-FD3 interface

• AXDSPX-FD3 vehicle T-harness (LD-DSP-FD3)

• Bass knob (LD-BASSKNOB)

www.AxxessInterfaces.com

TOOLS REQUIRED

TABLE OF CONTENTS

Connections ...........................................................2

Programming ........................................................3

Testing ...................................................................3

Specifications ........................................................3

Troubleshooting....................................................4

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties • Multimeter

If the vehicle is equipped with Active noise

cancelation (ANC) microphones, they

will need to be bypassed. Please refer

to Axxessinterfaces.com for ANC bypass

harnesses offered for select vehicles.

INTERFACE FEATURES

Add-a-Sub Data Interface

Fits Select Ford Models 2018-2025

• Designed for amplified and non-amplified systems

• 2-channel non-fading 5V RMS output

• Fixed low-pass frequency of 234Hz

• 250mA remote turn-on output

• Bass knob & vehicle-specific harness included

• Install done at radio location

• Micro “B” USB updatable

Visit AxxessInterfaces.comfor more detailed

information about the product and up-to-date

vehicle specific applications.

www.MetraOnline.com

For Dash Disassembly Instructions, refer to

metraonline.com.Enter the year, make, and

model of the vehicle in the Vehicle Fit Guide

for Radio Install kits.

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal before

installing this product. Ensure that all installation

connections, especially the air bag indicator lights, are

plugged in before reconnecting the battery or cycling

the ignition to test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

Product specificaties