Axxess AXLOC4M-80 Handleiding

Bekijk gratis de handleiding van Axxess AXLOC4M-80 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.9 sterren uit 7 reviews. Heb je een vraag over Axxess AXLOC4M-80 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AXLOC4M-80AXLOC4M-80

INSTALLATION INSTRUCTIONSINSTALLATIONINSTRUCTIONS

AXLOC4M-80AXLOC4M-80

INSTALLATIONINSTRUCTIONSINSTALLATIONINSTRUCTIONS

REV. 4/28/20REV. 4/28/20

© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION

Integrate • AxxessInterfaces.comIntegrate • AxxessInterfaces.com

REV. 4/28/20REV. 4/28/20

© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION

Integrate • AxxessInterfaces.comIntegrate • AxxessInterfaces.com

The Line Output Converter (LOC) should be installed on a stereo’s speaker output

wires or the output wires on an OEM amplifier of up to 80 watts per channel.

These wires can be found behind the stereo in the dash, on the outside of an OEM

amplifier, or on the input terminals on the OEM speakers.

Wire color and function

The audio input wire colors are an EIA standard for car stereo applications as follows:

Note: Be sure that all audio input connections are polarized or in phase with each

other. That is, the positive output wires from the audio source need to be connected

to the corresponding positive input wires of the LOC. The same goes for the negative

audio wires. Failure to do this will result in poor bass response and low quality audio.

(Continued on other side)

The Line Output Converter (LOC) should be installed on a stereo’s speaker output

wires or the output wires on an OEM amplifier of up to 80 watts per channel.

These wires can be found behind the stereo in the dash, on the outside of an OEM

amplifier, or on the input terminals on the OEM speakers.

Wire color and function

The audio input wire colors are an EIA standard for car stereo applications as follows:

Note:Be sure that all audio input connections are polarized or in phase with each

other. That is, the positive output wires from the audio source need to be connected

to the corresponding positive input wires of the LOC. The same goes for the negative

audio wires. Failure to do this will result in poor bass response and low quality audio.

(Continued on other side)

The Line Output Converter (LOC) should be installed on a stereo’s speaker output

wires or the output wires on an OEM amplifier of up to 80 watts per channel.

These wires can be found behind the stereo in the dash, on the outside of an OEM

amplifier, or on the input terminals on the OEM speakers.

Wire color and function

The audio input wire colors are an EIA standard for car stereo applications as follows:

Note:Be sure that all audio input connections are polarized or in phase with each

other. That is, the positive output wires from the audio source need to be connected

to the corresponding positive input wires of the LOC. The same goes for the negative

audio wires. Failure to do this will result in poor bass response and low quality audio.

(Continued on other side)

The Line Output Converter (LOC) should be installed on a stereo’s speaker output

wires or the output wires on an OEM amplifier of up to 80 watts per channel.

These wires can be found behind the stereo in the dash, on the outside of an OEM

amplifier, or on the input terminals on the OEM speakers.

Wire color and function

The audio input wire colors are an EIA standard for car stereo applications as follows:

Note:Be sure that all audio input connections are polarized or in phase with each

other. That is, the positive output wires from the audio source need to be connected

to the corresponding positive input wires of the LOC. The same goes for the negative

audio wires. Failure to do this will result in poor bass response and low quality audio.

(Continued on other side)

Input harness

WhiteLeft front (+) input

White/BlackLeft front (-) input

GrayRight front + input

Gray/BlackRight front (-) input

GreenLeft rear (+) input

Green/BlackLeft rear (-) input

PurpleRight rear (+) input

Purple/BlackRight rear (-) input

Power harness

YellowBattery +12v input

BlackPower (-) ground input

BlueRemote +12v output

BrownReference ground (-)

Input harness

WhiteLeft front (+) input

White/BlackLeft front (-) input

GrayRight front + input

Gray/BlackRight front (-) input

GreenLeft rear (+) input

Green/BlackLeft rear (-) input

PurpleRight rear (+) input

Purple/BlackRight rear (-) input

Power harness

YellowBattery +12v input

BlackPower (-) ground input

BlueRemote +12v output

BrownReference ground (-)

Input harness

WhiteLeft front (+) input

White/BlackLeft front (-) input

GrayRight front + input

Gray/BlackRight front (-) input

GreenLeft rear (+) input

Green/BlackLeft rear (-) input

PurpleRight rear (+) input

Purple/BlackRight rear (-) input

Power harness

YellowBattery +12v input

BlackPower (-) ground input

BlueRemote +12v output

BrownReference ground (-)

Input harness

WhiteLeft front (+) input

White/BlackLeft front (-) input

GrayRight front + input

Gray/BlackRight front (-) input

GreenLeft rear (+) input

Green/BlackLeft rear (-) input

PurpleRight rear (+) input

Purple/BlackRight rear (-) input

Power harness

YellowBattery +12v input

BlackPower (-) ground input

BlueRemote +12v output

BrownReference ground (-)

Product specificaties