Axxess AXABH-LX2 Handleiding

Bekijk gratis de handleiding van Axxess AXABH-LX2 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.4 sterren uit 3 reviews. Heb je een vraag over Axxess AXABH-LX2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

AXABH-LX2

INSTALLATION INSTRUCTIONS

AxxessInterfaces.com © COPYRIGHT 2025 METRA ELECTRONICS CORPORATION REV. 6/25/25 INSTAXABH-LX2

ATTENTION: With the key out of the ignition, disconnect

the negative battery terminal before installing this

product. Ensure that all installation connections,

especially the air bag indicator lights, are plugged in

before reconnecting the battery or cycling the ignition

to test this product.

NOTE: Refer also to the instructions included with the

aftermarket accessory before installing this device.

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip ties

TABLE OF CONTENTS

Amplifier Location & Connections

13 Speaker .............................................................2

14 Speaker ............................................................3

Amplifier Bypass Harness

Fits Select Subaru BRZ Models2013-2017

Factory amp must stay plugged into vehicle in order for your factory

HVAC to work. When using the bypass harness only unplug connectors

that correspond with the amp bypass being used. All other remaining

plugs must stay plugged in with amp and remain in vehicle.

Refer to the following pages for the vehicle specific instructions for

wiring connections. Wiring connections vary per amplifier design.

There is a 13 speaker system, and a 14 speaker system.

If uncertain whether the vehicle contains a specific speaker or not,

test the wires with a tone generator, or check to see if the factory

wires are populated on the vehicle side. Alternatively, the wires can

be tested for impedance with a multimeter.

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date

vehicle specific applications

• Vehicle-specific harness to bypass the factory amplifier

• Saves the installer unnecessary labor and wire

• 20 gauge wires

• Wire Length: 12”

APPLICATIONS

Subaru

BRZ .....................................................................2013-2017

Amplifier Location: Rear deck

FEATURES

Product specificaties