Audio-Technica BPHS2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Audio-Technica BPHS2 (4 pagina's) in de categorie Headset. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
HP-HB2
HP-TP2*
HP-HB2
HP-TP2
Premium Replacement Pads
Coussinets de rechange haut de gamme
Almohadillas de recambio de alta calidad
For Models:
Pour modĂšles :
Para los modelos:
ATH-M60x, BPHS2, BPHS2C & BPHS2S
*HP-TP2 is only used on BPHS2S
*Le HP-TP2 est réservé au modÚle BPHS2S
*Las HP-TP2 sĂłlo sirven para BPHS2S
HP-HB2 / HP-TP2
1. Remove the existing headband pad by holding the headband
just above the earcup and pulling the pad loose from the tabs
that run along the underside edges of the headband. (Figure A.)
Start by pulling one end of the pad loose, then work your way
over to the other end.
Retirez le coussinet du serre-tĂȘte en tenant ce dernier juste
au-dessus de la coupelle et en tirant sur le coussinet pour le
dégager des languettes situées le long des cÎtés inférieurs du
serre-tĂȘte (Figure A). Tirez d’abord une extrĂ©mitĂ© du coussinet
dĂ©tachĂ©, puis l’autre.
Retire la almohadilla actual de la diadema; para ello,
sostenga la diadema justo por encima del auricular y tire de
la almohadilla para soltarla de las lengĂŒetas del borde inferior
de la diadema ( ). Para soltar la almohadilla, empiece Figura A
tirando de un extremo y continĂșe poco a poco hasta el otro.
2. Press the new pad onto the headband. ( ) Start by Figure B.
ïŹtting the slots at one end of the pad onto the headband tabs
and then work your way over to the other end, pressing the
pad onto the headband as you go.
Installez le nouveau coussinet sur le serre-tĂȘte en appuyant
dessus ( ). Commencez par mettre en place les Figure B
fentes Ă  l’une des extrĂ©mitĂ©s du coussinet sur les languettes
du serre-tĂȘte puis procĂ©dez de l’autre cĂŽtĂ©, en appuyant le
coussinet sur le serre-tĂȘte au fur et Ă  mesure.
Presione la nueva almohadilla sobre la diadema ( ). Figura B
Empiece por encajar las ranuras de uno de los extremos de
la almohadilla en las lengĂŒetas de la diadema y despuĂ©s
continĂșe hasta el otro extremo sin dejar de presionar la
almohadilla sobre la diadema en todo momento.
Figure A
Figure B
HP-HB2 / HP-TP2
3. Remove the existing temple pad by holding the headband and
pulling the pad loose. ( )Figure C.
Retirez le coussinet pour tempe en tenant le serre-tĂȘte et en
tirant sur le coussinet pour le détacher (Figure C).
Retire la almohadilla lateral actual; para ello, sostenga la
diadema y tire de la almohadilla hasta que se suelte (Figura C).
4. Remove the paper from the new pad’s adhesive base.
( )Figure D.
Retirez le papier de la base adhésive du nouveau coussinet
( ).Figure D
Retire el papel de la base adhesiva de la almohadilla
nueva (Figura D).
Figure C
Figure D


Product specificaties

Merk: Audio-Technica
Categorie: Headset
Model: BPHS2

Heb je hulp nodig?

Als je hulp nodig hebt met Audio-Technica BPHS2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Headset Audio-Technica

Handleiding Headset

Nieuwste handleidingen voor Headset