Audio-Technica ATM410 Handleiding

Audio-Technica Microfoon ATM410

Lees hieronder de 📖 handleiding in het Nederlandse voor Audio-Technica ATM410 (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

CARDIOID DYNAMIC VOCAL MICROPHONE

- Tailored for smooth, natural vocal reproduction.

- Cardioid polar pattern reduces pickup of sounds from the sides and

rear, improving isolation of desired sound source.

- Durable performance for professional applications.

- Hi-ENERGY® neodymium magnet for improved output and transient

response.

- Excellent off-axis rejection for minimum feedback.

- Superior anti-shock engineering for low handling noise.

- Multi-stage grille design offers excellent protection against plosives

and sibilance without compromising high-frequency clarity.

- Quiet-Flex™ stand clamp provides silent, exible microphone

positioning.

- Corrosion-resistant contacts from gold-plated XLRM-type connector.

- Rugged, all-metal design and construction for years of trouble-free

use.

Output from the microphone’s XLRM-type connector is low

impedance (Lo-Z) balanced. The signal appears across Pins 2 and

3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” - positive

acoustic pressure produces positive voltage at Pin 2.

To avoid phase cancellation and poor sound, all mic cables must

be wired consistently: Pin 1-to-Pin 1, etc. For a high-impedance

(Hi-Z) mic input, connect a Lo-Z balanced cable to a Hi-Z matching

transformer (A-T CP8201 or equal) at the equipment input.

When using the ATM410 in settings with a stage monitor speaker,

the speaker should be located 180° off axis (at the rear of the

microphone). This placement, in conjunction with the microphone’s

uniform cardioid pickup pattern, will virtually eliminate the possibility

of undesired audio feedback.

Take care to keep foreign particles from entering the windscreen.

An accumulation of iron or steel filings on the diaphragm, and/or

foreign material in the windscreen’s mesh surface, can degrade

performance.

FORM No. ATGC-L0030-06-E

Machida • Toky o • Japa n

10 dB

20k10k5k2k1k50020010050

8 kHz

200 Hz

1 kHz

5 kHz

0°

330°

300°

270°

240°

210°

180°

150°

120°

90°

60°

30°

Polar Pattern

Frequency Response

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

Frequency in Hertz

LEGEND 12” or more on axis

Response in dB

SPECIFICATIONS

ELEMENT Dynamic

POLAR PATTERN Cardioid

FREQUENCY RESPONSE 90-16,000 Hz

OPEN CIRCUIT SENSITIVITY -55 dB (1.7 mV) re 1V at 1 Pa

IMPEDANCE 300 ohms

WEIGHT (less cable and accessories) 233 g

DIMENSIONS 170.0 mm - long,

53.5 mm - diameter

OUTPUT CONNECTOR Integral 3-pin XLRM-type

ACCESSORIES FURNISHED AT8470 Quiet-Flex™ stand clamp for

⅝”-27 threaded stand;

⅝”-27 to ⅜”-16 threaded adapter;

Soft protective pouch

10 dB

20k10k5k2k1k50020010050

8 kHz

200 Hz

1 kHz

5 kHz

0°

330°

300°

270°

240°

210°

180°

150°

120°

90°

60°

30°

指向特性

频率特性

声压曲线 1刻度5 dB

频率

频率 (赫兹)

电平平直

响应电平 (dB)

FORM No. ATGC-L0030-06-C

Machida • Tokyo • Japan

心形指向性动圈式话音话筒

- 专为要求自然及柔和的人声话音收音而开发。

- 心形指向性设计，减低旁边及后方的噪声干扰，提高收音目

标的隔离度。

- 专业应用性的耐用表现。

- Hi-ENERGY® 高能量钕硼磁铁，提供更大输出及音质透明度。

- 出色的防回声特性，适合在舞台上使用。

- 优秀的抗震结构，能有效减低手持噪声。

- 多层音头保护网结构，能加强收录爆破声时的保护，又不会

影响高音的收音质量。

- Quiet-Flex™

话筒夹，提供防震、静音的保护，并可调校话筒

位置。

- 抗腐蚀的镀金XLRM卡农输出头。

- 全金属结构，坚固、耐用、可长期使用。

话筒的卡农输出端为低阻抗平衡输出，话筒音频信号最终XLRM

以卡农公头的2号及3号针脚输出，而1号针脚则为地线(屏蔽)连

接。输出相位将以正相位电平设于2号针脚上。

为避免出现相位相互抵消而失真的情况，所有话筒连接时，

接线必需以1-1，2-2，3-3型式把针脚连接。如连接高阻抗的话

筒输入，请配套阻抗匹配变压器AT8201。

当ATM410话筒及现场监听音箱同时使用时，需要把音箱放置于

话筒的 180°正后方。在这位置上，由于话筒的心形指向性设计，

可减低出现反馈回声的情况。

小心不要把金属碎或铁屑掉进防风罩内，铁屑会吸进收音头磁铁

中，或贴在防风罩内，将会影响及减低收音效果。

技术指标

收音头动圈式

指向特性心形指向性

频率响应 90-16,000 Hz

开通灵敏度 -55 dB (1.7 mV) 以 1V 于 1 Pa

输出阻抗 300 欧姆

重量(不带连线与配件) 233 克

外形尺寸 170.0 mm - 长度,

53.5 mm - 直径

输出连接器内置 XLRM-3针卡农公头

附属品 AT8470 Quiet-Flex™ - ⅝”-27接头

话筒夹，

⅝”-27至⅜”-16转接头，保護袋。

Product specificaties

Merk:	Audio-Technica
Categorie:	Microfoon
Model:	ATM410
Gewicht:	233 g
Connectiviteitstechnologie:	Bedraad
Soort kabel:	XLRM
Gevoeligheid microfoon:	55 dB
Frequentie microfoon:	90 - 16000 Hz
Microphone input impedance:	300 Ohm