Slate Digital ML-1A Handleiding

Bekijk gratis de handleiding van Slate Digital ML-1A (5 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over Slate Digital ML-1A of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Virtual Microphone System

User Guide

Introduction

The Slate Digital Virtual Microphone System is a breakthrough product that brings a growing

collection of world-class and indispensable microphone models to your studio at an

extremely aordable price. This amazing experience is realized through a combination of a

specially designed and optimized -series microphone along with our Virtual Microphone ML

System software plug-in.

To fully understand and maximize the value of the VMS, please take the time to read

through the contents of this userguide. While VMS is fairly straightforward and intuitive to

use, there are some points in this guide that will ensure top performance and results.

Setup

Your new ML-series microphone is set up just like any other microphone you may own.

1.Mount the microphone to a microphone stand using the included mounting

equipment. While it is possible to hold the microphone in your hand, mounting it

will help ensure the microphone isn’t accidentally dropped and will also minimize

undesirable physical noise that it could pick up due to handling and movement.

2.Identify the microphone input on your audio interface that you wish to use. Note

that the audio interface must be capable of providing Phantom Power on the

microphone input in order to provide the microphone with the power required to

operate.

3.Turn down the Input Gain of the microphone input on the audio interface and

ensure Phantom Power is o. This will help prevent loud noises when connecting

the micropohone. If needed, please consult the user manual of your audio interface

to learn how to switch Phantom Power for the microphone input.

4.Connect the microphone to the microphone input on your audio interface using

a high-quality XLR microphone cable. You can use any cable brand or length you

choose.

5.Enable the Phantom Power on the audio interface. This will provide power to the

microphone, and it will begin to operate.

6.While singing or playing into the microphone, slowly turn up the Input Gain on

the audio interface. You should see the level meters on the audio interface begin to

show an incoming audio level, though some audio interfaces simply have a single

light that will illuminate when signal is present.

7.Create an audio track in your DAW/host software and select the audio

interface’s microphone input as the input for the track. This is now the track

Product specificaties