Audio-Technica AT8410a Handleiding

Audio-Technica Niet gecategoriseerd AT8410a

Lees hieronder de 📖 handleiding in het Nederlandse voor Audio-Technica AT8410a (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Description

These Audio-Technica shock mounts provide

excellent mechanical isolation while offering

unusual versatility and ease of use. Equally

adapted to cylindrical and tapered microphones,

they attenuate noise, shock and vibration

transmitted through microphone stands,

booms and fixed microphone mounts.

The AT8410a permits easy microphone insertion

and removal without detaching the mic cable;

its spring-loaded clamp holds even heavy

tapered microphones securely. The AT8415’s

light weight and low profile make it an excellent

choice for “fishpole” booms and for video use.

The AT8410a mounts directly to any stand

with standard 5

/8"-27 threads, and includes a

constant-tension clutch and 180˚ swivel for

easy, positive microphone adjustment. Isolation

is accomplished with elastic shock cord.

The AT8415 is furnished with a

3/8"-16 threaded

hole for mounting to a European standard

boom. A threaded adapter is provided with the

AT8415 that allows it to mate with US

Professional

Microphone Accessories

AT8410a/AT8415

MICROPHONE SHOCK MOUNTS

AT8415 Shock MountAT8410a Shock Mount

standard 5/8"- 27 threads. Also, a US standard

/16"-18 bolt will pass through the 3/8" hole in the

bail and can be secured with the appropriate

size nut. The U-shaped mounting bail features

a constant-tension clutch and is free to rotate

360˚. Isolation is accomplished with four

chloroprene bands.

Both Audio-Technica shock mounts accom-

modate most microphones in common use.

A suspended clamp on the AT8410a accepts

any cylindrical microphone body from 16.8 mm

(about 11

/16") to 28.8 mm (over 11/8

"). The

“clothes-pin” jaws can also pivot to firmly

hold the tapered body typical of many vocal

mics. The AT8415 mounting bands accept

any cylindrical or tapered microphone body

from 12.7 mm (about 1/2") to 54 mm (about

21/8"). The mounting bands may be criss-

crossed for increased support or for smaller

diameter microphones.

The use of a shock mount is particularly

important in any application where wide-

range sound equipment is used and where

high-level low frequency sounds can be

expected.

The AT8410a and AT8415, which have been

extensively tested in recording studios, on

stage and on major TV network programs,

are well suited to a wide variety of applica-

tions. In the TV studio, they can isolate boom

microphones from noise generated by rack-

ing the boom extension in and out, and rapid

swiveling of the boom or head. Their small

size and open construction also minimize

shadow problems.

In radio stations, noise from console opera-

tion and microphone swivel mounts is

reduced or eliminated. In the recording

studio, effective microphone isolation reduces

leakage for better control during mixing or

re-mixing.

In sound reinforcement usage, the AT8410a

and AT8415 isolate microphones from

lecterns or tables and reduce feedback from

microphones mechanically coupled to a stage

or other resonant surface. And in live enter-

tainment, shock mounts minimize noise from

the movement of instruments as well as the

pickup of high-level energy transmitted from

nearby speakers.

Instructions

The AT8410a mounts to any stand, boom or

mount with standard 5/8"-27 threads. It is

equally effective at any combination of stand

and microphone angles. The AT8415 will

attach directly to all booms, etc., with

European

3/8"-16 threads, and to all mounts

with 5/8"-27 threads via the threaded adapter

provided. It can also be used with bolts

smaller than 3/8" if the appropriate size mating

nut is used.

To mount a microphone in the AT8410a, it is

not necessary to disconnect the mic cable.

Simply squeeze the clamp jaws open, draw

the mic cable through the slot, slide the micro-

phone into position and release the clamp.

For either model, the microphone should be

inserted until the mass on both sides of the

mount is about equal. This normally permits

the head of the microphone to extend

beyond the shock mount, free of any acoustic

disturbance, and puts equal stress on all

suspension points.

Care should be taken to provide adequate

slack in the microphone cable. A generous

loop eliminates cable noise and permits the

microphone to move freely within the shock

mount, maintaining effective isolation.

Swivel tension on the AT8410a has been

preset at the factory to permit easy adjust-

ment while ensuring positive support. It may

be tightened or loosened with a coin or

screwdriver, if desired. On the AT8415,

swivel tension is easily adjusted by loosening

or tightening the two knobs. If ever needed,

replacement shock cord for the AT8410a and

mounting bands for the AT8415 are available

from the Audio-Technica service department.

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224 330/686-2600

Audio-Technica Limited, Old Lane, Leeds LS11 8AG England 0113 277-1441

One-Year Limited W rantyar

Audio-Technica microphones and accessories purchased in the U.S.A. are warranted

for one year from date of purchase by Audio-Technica U.S., Inc. (A.T.U.S.) to be free

of defects in materials and workmanship. In event of such defect, product will be

repaired promptly without charge or, at our option, replaced with a new product of

equal or superior value if delivered to A.T.U.S. or an Authorized Service Center, pre-

paid, together with the sales slip or other pr chase date. oof of pur

Prior approval

from A.T.U.S. is required for return.

This warranty excludes defects due to normal

wear, abuse, shipping damage, or failure to use product in accordance with instructions.

This warranty is void in the event of unauthorized repair or modification.

For return approval and shipping information,

contact the Service Department,

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224.

Except to the extent precluded by applicable state law,

A.T.U.S. will have no liability

for any consequential, incidental, or special damages; any warranty of mer-

chantability or fitness for particular purpose expires when this warranty

expires.

This warranty gives you specific legal rights, and you may have other rights which

vary from state to state.

Outside the U.S.A., please contact your dealer for warranty details.

AT8415 Specications

Height 4.25" (108.0 mm)

Depth 2.75" (70.0 mm)

Ring Diameter 2.32" (59.0 mm)

Net Weight 3 oz (85 grams)

Minimum Microphone Diameter 0.5" (12.7 mm)

Maximum Microphone Diameter 2.13" (54.1 mm)

Microphones Accepted Cylindrical or tapered

within the limits above

Suspension System Four chlor ene bandsopr

Swivel Rotation 360°

Attenuation 8 dB to 10 dB broadband

(depends on microphone

response, construction and

mass)

AT8410a Specications

Height 5.23" (133.3 mm)

Depth 3.93" (99.7 mm)

Ring Diameter 3.11" (79.0 mm)

Net Weight 6.3 oz (179 grams)

Minimum Microphone Diameter 0.66" (16.8 mm)

Maximum Microphone Diameter 1.13" (28.8 mm)

Microphones Accepted Cylindrical or tapered

within the limits above

Clamping System Spring-loaded “clothes-pin”

Suspension System Elastic shock cord

Swivel Rotation 180°

Attenuation 8 dB to 10 dB broadband

(depends on microphone

response, construction and

mass)

AT8410a Dimensions AT8415 Dimensions

79.0 mm

3.11"

99.7 mm

3.93"

5.23"

133.3 mm

3.12"

79.3 mm

108.0 mm

4.25"

70.0 mm

2.75"

3.38"

86.0 mm

4.00"

101.6 mm

54.1 mm

2.13"

59.0 mm

2.32"

Product specificaties

Merk:	Audio-Technica
Categorie:	Niet gecategoriseerd
Model:	AT8410a

Heb je hulp nodig?

Als je hulp nodig hebt met Audio-Technica AT8410a stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Audio-Technica

Audio-Technica ATW-2000c Handleiding

26 Maart 2024

Audio-Technica AT-UMX3 Handleiding

27 Februari 2024

Audio-Technica ATM73acH Handleiding

20 Juni 2023

Audio-Technica BPW-250 Handleiding

11 Juni 2023

Audio-Technica BPZ-XL Handleiding

7 Juni 2023

Audio-Technica ATW-3202 Handleiding

4 Juni 2023

Audio-Technica ATUC-50 Handleiding

23 Mei 2023

Audio-Technica ATW-2194BI Handleiding

20 Mei 2023

Audio-Technica BPZ-L Handleiding

13 Mei 2023

Audio-Technica BPW-120 Handleiding

6 Mei 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024

Sony PDW-U4 Handleiding

26 April 2024

Sony NXL-FR318 Handleiding

26 April 2024