Atoll PR300 EVO Handleiding

Bekijk gratis de handleiding van Atoll PR300 EVO (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.5 sterren uit 5 reviews. Heb je een vraag over Atoll PR300 EVO of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ATOLL ELECTRONIQUE

OWNER’S MANUAL ~ PREAMP

PR300 EVO

ATOLL ELECTRONIQUEPage 5Page 4

DETAILS OF FUNCTIONSCONNECTING

(1)

Trigger output: this output is used to control the switching

ON/SLEEP of any device equipped with a compatible Trigger

input (see instructions for use).

Trigger cable must be a stereo Male to Male jack plug

Ø 3,5 mm (1/8”).

18) Headphone jack: connecting headphones cuts off the analog outputs (XLR/RCA).

19) Power ON/SLEEP knob by pressing; source selection by rotation.

20) Power on knob; volume management (rotation) or menu access.

REMOTE CONTROL

(2)

Tape input / output - monitoring loop:

The TAPE function allows the recording of music from any selected source.

You can also activate a permanent monitoring loop as follows: select your source

then hold the TAPE button on the remote control for about 3 seconds. The TAPE

symbol lights up and indicates that the monitoring loop is activated. In this

mode, direct access to the TAPE input is no longer possible.

You can use this mode to insert an equalizer between the TAPE IN and TAPE OUT

sockets.

This function is memorized even if you switch off the device from the mains. To

deactivate this mode, simply hold down the TAPE button on the remote control again

for 3 seconds.

Jack

Ø 3,5 mm

171819

234567891101112

Optional Digital Board

1314151617

1) Left XLR Input/Output.

2) AUX or PHONO Input (optional).

3) CD Input.

4) TUNER Input.

5) DVD Input.

6) Tape Recorder Output (REC)(2)/

Tape Recorder Output (PLAY)(2).

7) BY-PASS Input.

8) Preamp Outputs (to 1 or 2 power amps

or a subwoofer).

9) Right XLR Input/Output.

10) 12V Trigger Output

(1)

.

11) Mains connection.

12) Main switch.

13 & 14) Coaxial Inputs 1 & 2.

15 & 16) Optical Inputs 1 & 2.

17) USB-B Input.

Optional Digital Board

Volume

+

/ , balance

adjustment and selection

in menus

Selection of sources

+

/

Access to menus

Display management:

ON/OFF

Mute

BY-PASS input selection

(*)

Selecting digital inputs

Direct access to sources

(1)

ON/SLEEP

The BY-PASS input allows you to use your PR300 as a passive preamplifier (to be connected to the output

of an audio-video preamp for example). This input is selected via the front panel or by the BY-PASS

button on the remote control. Once this input is selected, the word “BY-PASS” is displayed on the screen.

To exit the BY-PASS, press the BY-PASS button on the remote control or change the source.

CONFIG: Access to menus:

– Balance (1 press): the balance is adjusted using the VOL

+

/ keys.

You can save this setting by pressing and holding the CONFIG key.

– Display (2 presses): use the VOL

+

/ keys to select ON/OFF to turn the display ON or OFF.

– SBY ECO (3 presses): use the VOL

+

/ keys to select the time after which the appliance will switch

to economy mode when in standby.

- OFF: the appliance will remain in preheating mode: consumption will be 18 W.

- 10 sec, 5 min, 15 min, 30 min, 60 min: Consumption <0.5 W after the set time.

– A long press on CONFIG renames the selected entry. Select the characters using the VOL

+

/

keys and move to the next character using the SEL

+

/ keys and confirm by pressing CONFIG again.

(1)

Access to the OPT, COAX, USB, BT inputs is only possible if the amplifier is equipped with the

DAC board.

(*) USING THE BY-PASS INPUT

Product specificaties