Atoll PH200 Handleiding

Bekijk gratis de handleiding van Atoll PH200 (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 11 mensen en kreeg gemiddeld 4.9 sterren uit 9 reviews. Heb je een vraag over Atoll PH200 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ATOLL ELECTRONIQUE

OWNER’S MANUAL ~ PHONO PREAMPLIFIER PH200

ATOLL ELECTRONIQUEPage 5Page 4

CONNECTING

8) ON/SLEEP led indicator.

DETAILS OF FUNCTIONS

1

567

8

(1)

Trigger input: this input allows you to control the power

ON/SLEEP of your PH200 simultaneously with any device

equipped with a compatible Trigger output. In order for the

system to work, the button on your PH200 must ON/SLEEP

remain in the position (0). If the switch is in the (I) SLEEPON

position, it will work but not the Trigger function.

The Trigger connection must be made with a Ø 3,5 mm Male/Male stereo

jack cable.

Jack cable

Ø 3,5 mm

234

The PH200 phono module allows you different configurable configurations. They

can be carried out directly at the rear of the module via the 2 4-point switch blocks,

one for the left channel and the other for the right channel (you can also refer to the

screen-printed diagrams on the rear side). Make sure that the 2 switch blocks are in

the same position.

1) MM – MC setting: Depending on the cartridge of your phono turntable, you can

select the MM or MC input.

2) Choice of input capacitor: This setting concerns both the MM and MC cells. It

allows you to adapt the musicality of your PH200 to your system.

• For an MM cell, set and to OFF.34

• For a high level MC cell (MCH), place to ON, 3

and to OFF.4

• For a MC Low Level (MCL) cell, set and to ON.34

• For no input capacitor set and to OFF 12

(recommended by default).

• To select a 100 pF capacitor set to ON, and to 12

OFF.

• To select a 220 pF capacitor place to OFF, and 1

2 to ON.

• To select a 320 pF capacitor set to ON, and to 12

ON.

CONFIGURATIONS

3 4

MMOFFOFF

MC HighONOFF

MC LowONON

12

DefaultOFFOFF

100 pFONOFF

220 pFOFFON

320 pFONON

Caution: This adjustment must be made when the PH200 and the amplier

are turned off.

Caution: This adjustment must be made when the PH200 and the amplier

are turned off.

1) Ground.

2) Turntable signal input.

3) Settings blocks.

4) Module signal output.

5) Trigger input 12 V

(1)

.

6) General power plug.

7) ON/SLEEP switch (Attention: the

power-on led indicator takes a long

time to turn-off).

Product specificaties