Asko AT12A Handleiding

Bekijk gratis de handleiding van Asko AT12A (40 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 24 mensen en kreeg gemiddeld 4.0 sterren uit 5 reviews. Heb je een vraag over Asko AT12A of wil je andere gebruikers van dit product iets vragen? Stel een vraag

EN 3

The grill plate and teppanyaki are hand casted in aluminium. The plates

have a special layer making them suitable for induction, as well as a

non-stick coating. The hand-crafted plates are never completely smooth,

but adjust to the hob on heating.

The plates work very well on induction zones with bridge function.

The bridge function enables even heating of the entire plate. You can

also decide to use two different settings (for the front and rear zone) so

that, for example, the front of the plate can be used for searing, while

the rear is used to cook the dish.

Prior to initial use

• Prior to initial use, clean the plate with a soft sponge, hot water and

some washing up liquid and then rinse the plate well.

Tips for use

• Small residues between the plate (such as salt or peppercorns)

can move back and forth, causing scratches or worn areas both on

the bottom of the plate and on the induction hob. For this reason

you should always lift the plate when moving it. The manufacturer

accepts no liability for damage resulting from non-adherence to the

instructions for use.

• The high-quality non-stick coating makes the plate highly suitable

for healthy cooking without fat. If you wish to fry using oil, spread

a small amount of oil on the food you are cooking. Do not oil the

plate. Use hydrogenated or non-hydrogenated vegetable oil. Butter,

margarine, cold-pressed oil and salad oil are not suitable.

• Only use the plate to cook food.

• Never use sharp or metal objects. These can cause scratches.

However, scratches or other damage have no effect on the taste or

quality of the cooked food.

• Never use the plate on cooking level 12 or the boost function. Never

allow the plate to stand on an activated hob for long periods without

food. The plate could then quickly reach temperatures of 300 °C. Oil

and fat on the surface of the plate could quickly start to burn at these

high temperatures. This could damage the non-stick coating.

• An indication of the hob’s pre-heat time in setting 11 is 2-3 minutes

to reach a temperature of around 180°C.

GRILL PLATE/TEPPANYAKI

Product specificaties