Argoclima Soul & Soul TT Handleiding

Argoclima Heater Soul & Soul TT

Lees hieronder de 📖 handleiding in het Nederlandse voor Argoclima Soul & Soul TT (6 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

V 06/13

OPERATING INSTRUCTIONS

Read the instructions carefully before installing and operating the appliance or performing

maintenance operations. Observe all the safety instructions; failure to observe the instructions may

cause accidents and/or damages. Store these instructions for future reference.

ELECTRIC CONVECTOR HEATER

V 06/13

GENERAL SAFETY INFORMATION

 Use this convector only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire,

electric shock or injury to people.

 Ensure that the mains power complies with the voltage specified on the convector data plate (220-240V~/50Hz).

 This product is not a toy. Children should be adequately supervised to ensure that they do not play with the appliance.

 This appliance is not suitable for use by people (including children) with reduced physical, sensory or mental abilities, or

without the necessary experience and knowledge, unless they have been adequately supervised and instructed

concerning use of the appliance by a person responsible for their safety.

 Do not restrict the air inlet and outlet grilles.

 The appliance heats up slightly when in use. In order to avoid burns, do not let bare skin touch hot surfaces.

 Ensure that all objects are at least 1 meter from the front and sides of the appliance.

 Disconnect the mains power when the appliance is not used or for cleaning operations.

 Avoid using the convector in dusty environments or in the presence of inflammable vapours (e.g. in workshops or

garages) or paint vapours.

 Do not place anything on the appliance, use the appliance to dry clothing. Use the appliance in a well-ventilated area.

 Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as this may lead to electric shock or fire and may

damage the appliance.

 To avoid the risk of fire, do not block the grilles or tamper with them in any way while the convector operates.

 Do not use the appliance if the cord or plug are damaged. If the power supply cord is damaged, it must be replaced

by the manufacturer, dealer or a similarly qualified person so as to avoid any safety risks.

 Do not operate the appliance if it has fallen from a height or has suffered damage in any way. Contact qualified technical

personnel to examine the appliance or perform any electrical or mechanical repairs.

 The most common cause of overheating is the build-up of dust in the appliance. Remove dust deposits by unplugging the

appliance and cleaning the air outlets and grilles with the aid of a vacuum cleaner.

 Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not wet) cloth

rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning.

 To disconnect the convector, push the switch to OFF and remove the plug from the socket. Pull on the plug only. Avoid

pulling on the cord when disconnecting the convector.

 Do not place any objects on the cord and do not bend it.

 It is not advisable to use extension cords, as these may overheat and cause the risk of fire. Do not use a single extension

cord to operate multiple appliances.

 Do not immerse the cord, plug or any other element of the appliance in water or other liquids.

 Do not touch the plug with wet hands.

 Do not place the convector above or near another heat source.

WARNING: AVOID COVERING THE CONVECTOR TO PREVENT IT FROM OVERHEATING.

The symbol below signals the above warning:

 The convector may cause the risk of fire if, while in operation, is covered by or comes into contact with inflammable

material including curtains, drapery, blankets, etc. KEEP THE CONVECTOR AWAY FROM THESE MATERIALS.

 Do not connect the appliance to the mains power before it has been properly assembled and positioned.

 Do not run the cord under carpets. Do not cover the cord with blankets, carpets or similar materials. Place the cord far

away from busy areas or where it cannot be accidentally pulled-out.

 Do not position the convector below a socket outlet.

 Do not operate the appliance outdoors.

WARNING: do not use the convector with a controller or any other external device that activates the appliance

automatically, as there may be a risk of fire if the convector is covered or incorrectly positioned.

 Do not operate the convector in close proximity to bathtubs, showers, washbasins or pools.

 Upon initial start-up, the convector may emit a slight, harmless ffect of the initial heating smell. This smell is a normal e up

of the internal heating elements, and should not recur later on.

WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF DISCONNECTING

POWER. WHEN SERVICING OR MOVING THE CONVECTOR, ALWAYS UNPLUG THE POWER CORD.

 A convector has hot and arcing or sparkling parts inside. It must not be used in potentially dangerous locations such as

flammable, explosive, chemical-laden or wet atmosphere.

 Do not place the convector on soft surfaces, like a bed, where openings may become blocked. Always place the

convector on a stable, flat, level surface when operating, to avoid the chance of the convector overturning. Locate the

power cord so the convector or other objects are not resting on it.

 Always unplug the convector when not in use.

 In order to avoid accidents turn unit off if unattended.

 In the event of any problems (abnormal noise or a strange smell) switch off the appliance immediately, do not

attempt to repair it and take it to your local after sales service.

V 06/13

DESCRIPTION OF PARTS

FRONT VIEW SIDE VIEW REAR VIEW

A. Air delivery/air intake grille

B. Feet

C. 24 hours timer

D. Side handles

E. Power level selector and switch

F. Turbo switch (forced ventilation)

G. Room thermostat

H. Rear holes for wall mounting

HOW TO INSTALL THE APPLIANCE

The convector can be used underfloor, after assembling the feet, or alternatively it can be wall-mounted using the

specific accessories supplied.

A. Using as a portable appliance: how to assemble the feet supplied

The convector is packed without feet. These must therefore be assembled before using the appliance.

Assemble the feet as shown in the figure and put the convector in an upright position. Position the unit on a flat,

stable surface. When you move the appliance, use its side handles.

B. Wall-mounting: how to mount the convector onto the wall

The convector packaging contains all the accessories necessary for wall-mounting.

To wall-mount, proceed as follows.

Product specificaties

Merk:	Argoclima
Categorie:	Heater
Model:	Soul & Soul TT
Soort bediening:	Draaiknop
Kleur van het product:	Zwart
Aantal vermogenniveau's:	2
Timer:	Ja
Warmtebron:	Electrisch
Gewicht:	3500 g
Breedte:	600 mm
Diepte:	220 mm
Hoogte:	382 mm
Soort:	Radiator
Aan/uitschakelaar:	Ja
Instelbare thermostaat:	Ja
Oververhittingsbeveiliging:	Ja
Handvat(en):	Ja
Ophangsysteem voor aan de muur:	Ja
Draagbaar:	Ja
AC-ingangsspanning:	230 V
AC-ingangsfrequentie:	50 Hz
Geschikt voor ruimtevolume tot:	60 m³
Verwarmingsvermogen:	2000 W
Plaatsingsopties:	Floor, Table
Verwarming power (min):	750 W