Argoclima Hi Fan Digit Plus Handleiding

Argoclima Heater Hi Fan Digit Plus

Lees hieronder de 📖 handleiding in het Nederlandse voor Argoclima Hi Fan Digit Plus (4 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
CeramiC heater
User manUal
V01/09
HiFan Digit Plus_EG_2009_v2.indd 1 29/06/2009 15.53.13
 :
AUTO
LOWFAN


°C
°C
HIGH
READ AND SAVE THESE INSTRUCTIONS
GENERAL SAFETY INFORMATION
Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage. Retain these instructions for
future reference.
1. ON/OFF/MODE switch
2. Timer knob
3. Infrared receiver
4. Front netting
5. Base
6. LCD
7. - knob
8. Swing knob
9. + knob
10. Power switch
11. Front enclosure
12. Rear enclosure
13. Power cord
V01/09
1. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause re, electrical shock, or
injury to people.
2. Make certain that the power source conforms to the electrical requirements of heater. (AC220-240V/50Hz)
3. Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating unattended.
4. To reduce the risk of electric shock, this plug is intended to t in a correct outlet. If the plug of heater does nott fully in the outlet, contact a
qualied electrician. Do not attempt to defeat this safety feature.
5. Where possible, avoid to use of extension cords because the extension cord may overheat and cause a risk of re. Never use a single exten
-
sion cord to operate more than one heater.
6. Do not operate heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return
heater to an authorized service facility for examination, electrical or mechanical adjustment or repair.
7. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualied person in order to avoid a
hazard.
8. Turn off the power switch and unplug power cord before servicing or moving the heater. Always unplug heater when not in use..
WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN
SERVICING OR MOVING THE HEATER. ALWAYS UNPLUG THE POWER CORD.
9. To disconnect heater, turn switch to off position, then remove plug from outlet. Pull only by the plug. Do not pull on the cord when discon-
nect heater.
10. Do not insert or allowngers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or re or da-
mage the heater. Do not block or tamper with the heater in any manner while it is in operation.
11. To prevent a possiblere, do not block air intakes or exhaust in any manner. Do not place heater on soft surfaces, like a bed, where ope-
nings may become blocked.
12. Always place the heater on a stable, at, level surface when operating, to avoid the chance of the heater overturning. Locate the power
cord so the heater or other objects are not resting on it. Do not run power cord under carpeting. Do not cover power cord with throw rugs,
runners, or the like. Arrange power cord away from room trafc and where it will not be tripped over.
13. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Always use handle when moving this heater. Keep
combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 0.9m from the front of the heater and keep
them at least 0.3m from the sides and rear.
14. A heater has hot and arcing or sparking parts inside. It must not be used in potentially dangerous locations such as ammable, explosive,
chemical-laden or wet atmosphere.
15. This heater is not intended for use in wet or damp locations. Never locate a heater where it may fall into a bathtub or other water container.
16. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
17. Do not use heater outdoors.
18. In order to avoid overheating, do not cover the heater.
19. The heater must not be located immediately below a socket- outlet.
WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.
DO NOT USE THIS HEATER WITH ANY SPEED CONTROL DEVICES.
HiFan Digit Plus_EG_2009_v2.indd 2 29/06/2009 15.53.15
 :
AUTO
LOWFAN
 
°C
°C
HIGH
KEY ON-OFF/MODE
KEY TIMER KEY REGULATION -
KEY REGULATION +
KEY SWING MODE
SWING
TEMPERATURE TIMER
OPERATION
When the heater is plugged in and open the power switch on the rear of the unit base, the LCD will be in sleeping mode
2 seconds and will show ambient temperature.
Press key ON/OFF/MODE in order to activate the appliance and change the working mode, as described here below.
Press the regulation keys in order to set the desired temperature (AUTO mode).
The temperature can be set from 5°C (useful as anti freeze) up to 40°C, the default temperature is 30°C.
In order to activate the automatic switching off, press the timer key and set the keys regulation + and
regulation of the desired temperature (min 1h/max 24h).
In order to deactivate the timer set it at 0h with the regulation key.
Press the key swing in order to activate/deactivate the function.
WHEN THE HEATER SWITCHES OFF, THE FAN WILL CONTINUE TO WORK FOR SOME SECONDS IN ORDER TO
COOL AND PROTECT THE CERAMIC RESISTANCE.
DO NOT SWITCH THE HEATER DIRECTLY BY THE SWITCH ON THE REAR OR UNPLUGGING THE APPLIANCE.
THE SET TEMPERATURE AND THE TIMER WILL BE BROUGHT BACK TO THE DEFAULT SETTINGS EVERY TIME
THE ELECTRICAL SUPPLY IS REMOVED.
 
°C
°C °C °C
°C
 
LOWFAN

AUTOHIGH
LOW POWERFAN ONLY HIGH POWER AUTO
3” - STAND-BY
The AUTO function manages the fan heater power according to the desired temperature: once achieved the set
temperature, the fan heater modulates the power to maintain a constant temperature in the room. This feature
improves your comfort and reduces energy consumption.
HiFan Digit Plus_EG_2009_v2.indd 3 29/06/2009 15.53.16


Product specificaties

Merk: Argoclima
Categorie: Heater
Model: Hi Fan Digit Plus
Kleur van het product: Wit
Aantal vermogenniveau's: 2
Timer: Ja
Warmtebron: Electrisch
Gewicht: 2100 g
Breedte: 180 mm
Diepte: 160 mm
Hoogte: 380 mm
Soort: Ventilator elektrisch verwarmingstoestel
Aan/uitschakelaar: Ja
Beeldscherm: LCD
Indicatielampje: Ja
Instelbare thermostaat: Ja
Draaibaar: Ja
Oververhittingsbeveiliging: Ja
Op afstand bedienbaar: Ja
Dubbele isolatie: Ja
Afstandsbediening inbegrepen: Ja
AC-ingangsspanning: 230 V
AC-ingangsfrequentie: 50 Hz
Geschikt voor ruimtevolume tot: 60 m³
Verwarmingsvermogen: 1800 W
Plaatsingsopties: Vloer
Verwarming power (min): 900 W
Zomer-ventilatie: Ja
kantel aanpassingen: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Argoclima Hi Fan Digit Plus stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heater Argoclima

Handleiding Heater

Nieuwste handleidingen voor Heater