Apc SRTGRK1 Handleiding

Apc UPS SRTGRK1

Lees hieronder de 📖 handleiding in het Nederlandse voor Apc SRTGRK1 (15 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/15

Important Safety Instructions

Read the instructions carefully and look at the equipment to become familiar with the device before trying to install,

operate, service or maintain it. The following special messages may appear throughout this document or on the

equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.

The addition of this symbol to either a “Danger” or “Warning” product safety label indicates

that an electrical hazard exists which will result in personal injury if the instructions are

not followed.

This is the safety alert symbol. It is used to alert you to potential personal injury

hazards. Obey all safety messages that follow this symbol to avoid possible injury or

death.

DANGER

indicates a hazardous situation which, if not avoided, death or serious injury. will result in

WARNING

indicates a hazardous situation which, if not avoided, death or serious injury. could result in

CAUTION

indicates a hazardous situation which, if not avoided, minor or moderate injury. could result in

NOTICE

is used to address practices not related to physical injury.

Product Handling Guidelines

Installation Guide Smart-UPS

™

SRTGRK1 Tower to Rack-Mount Conversion

2 Smart-UPSTM RT SRTGRK1 Tower to Rack-Mount Conversion

Package Contents

Inspect the contents upon receipt. Notify the carrier and dealer if the unit is damaged.

One Rail Kit with instructions and hardware for

installing

rails in a rack.

Installation manual

（

）

Packing list

（

）

M5x12 Phillips flat head

screw for securing the rail to

the pillar

（

x12

）

SRTGRK1 is compatible with all variants of the following models:

•

SRTG5KXLI

•

SRTG5KXLT

•

SRTG6KXLI

•

SRTG8KXLI

•

SRTG10KXLI

•

Power module of SRTG15KXLI

•

Power module of SRTG20KXLI

•

SRTG192XLBP3

•

SRTG192XLBP4

Smart-UPSTM RT SRTGRK1 Tower to Rack-Mount Conversion 3

Tower to Rack-Mount Conversion of UPS

UPS model may differ in appearance from those depicted in these graphics.

CAUTION

RISK O

RISK ORISK OF FALLING O

F FALLING O

F FALLING OF FALLING OBJECTS

BJECTS

BJECTS BJECTS

•

The equipment is heavy.

•

Always practice safe lifting techniques adequate for the weight of the equipment.

•

Remove the battery modules before installing the UPS.

•

Use the battery module handle to carefully slide the battery module in or out of the unit.

•

Do not use the battery module handle to lift or carry the battery module.

•

Place the UPS on the table to remove the mounting base.

•

Always install the UPS at the bottom of the rack.

•

Always install the XLBP below the UPS in the rack.

Failure

Failure Failure to f

to f

to fto follow these

ollow these

ollow theseollow these instructi

instructi

instructi instructions ca

ons ca

ons caons can result i

n result i

n result in result in equip

n equip

n equipn equipment da

ment da

ment dament damage

mage

mage mage and mino

and mino

and minoand minor or mod

r or mod

r or modr or moderate injury

erate injury

erate injuryerate injury.

. .

❶

Remove

the stabilizer bracket

from UPS model.

❷

Remove the front bezel from UPS model.

Product specificaties

Merk:	Apc
Categorie:	UPS
Model:	SRTGRK1
Kleur van het product:	Zilver
Gewicht:	3100 g
Breedte:	73.5 mm
Diepte:	468 mm
Hoogte:	44.5 mm
Gewicht verpakking:	3400 g
Breedte verpakking:	91 mm
Diepte verpakking:	525 mm
Hoogte verpakking:	91 mm
Soort:	Rekrail
Montage gereedschap:	Ja
Snelle installatiehandleiding:	Ja
Code geharmoniseerd systeem (HS):	85389099