Apc Back- BX550CI-AR Handleiding

Bekijk gratis de handleiding van Apc Back- BX550CI-AR (4 pagina’s), behorend tot de categorie UPS. Deze gids werd als nuttig beoordeeld door 49 mensen en kreeg gemiddeld 4.7 sterren uit 6 reviews. Heb je een vraag over Apc Back- BX550CI-AR of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Installation and Operation

Back-UPS BX550CI-AR

Safety

Installation

Connect the Battery

Pull down on the battery connector handle, and then push it into the unit.

Connect Equipment

Connect equipment to the battery and surge protected outlets. These outlets

provide battery backup power and surge protection to all connected equipment.

Connect AC Power Cord

Connect the Back-UPS power cord directly into a wall outlet.

Turn on the Back-UPS

Press the Power ON button located on the front of the Back-UPS. The Power On LED will illuminate and a

single short beep will be audible to indicate that the Back-UPS is providing protection for connected

equipment.

The Back-UPS battery charges fully during the first 10 hours while connected to utility power. The Back-UPS

battery will charge while the Back-UPS is switched on or off and is connected to utility power. Do not expect

full battery run capability during the initial charge time.

This unit is intended for indoor use only.

Do not operate this unit in direct sunlight, in contact with fluids, or where there is

excessive dust or humidity.

Be sure the air vents on the unit are not blocked. Allow adequate space for proper

ventilation.

Environmental factors impact battery life. High temperatures, poor quality A/C power,

and frequent, short duration discharges will shorten battery life.

Connect the Back-UPS directly to a wall outlet. Do not use surge protectors or

extension cords.

1ON/OFF button

2Battery connector

3Circuit breaker

4Input power cord

5Battery and surge protected outlets

bu195a

Product specificaties