Antec BP500U - GB Handleiding

Antec Computervoeding BP500U - GB

Lees hieronder de 📖 handleiding in het Nederlandse voor Antec BP500U - GB (3 pagina's) in de categorie Computervoeding. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

Basiq

Models: BP500U

User’s Manual

Manuel de l’utilisateur

Anwenderhandbuch

Manuale per l’operatore

Manual del usuario

Antec Basiq User’s Manual

ATX12V version 2.01 power supply

Model: BP500U

Antec Basiq series power supplies are built to be compatible with the ATX12V

version 2.01 specification. They include dual 12V output circuitry that delivers

safer and more reliable output to your system’s components, as well as higher

energy efficiency, which reduces power consumption by up to 25%, saving you

money on your electricity bill. In addition we’ve included a variety of protective

circuitry: OPP (Over Power Protection), OVP (Over Voltage Protection), and SCP

(Short Circuit Protection).

BP500U includes Universal Input with Active Power Factor Correction (PFC).

Universal Input allows you to connect your Antec Basic power supply to any AC

power outlet between 100~240V without having to worry about setting a voltage

switch. Active PFC improves the power factor value to the power supply by alter-

ing the input current wave shape, helping the power plant provide power to users

more efficiently.

Power Switch: This power supply comes with a main power switch. Make sure

you turn the switch to the ON ( I ) position before you boot up your computer for

the first time. In normal operation there is no need to turn the switch to the OFF

(O) position since the power supply is equipped with a soft on/off feature which

turns your computer on and off through the soft switch on your computer case.

You may need to turn the switch to the OFF position occasionally should your

computer crash and you cannot shut it down through use of the soft switch.

Installation:

1. Turn off the hard power switch on your old power supply if any.

2. Open your computer case. Follow the directions provided in your case manual.

3. Disconnect all power connectors from the motherboard and from the peripheral

devices such as case fans, hard drives, optical drives, floppy drives, etc.

4. Disconnect the power cord from your old power supply.

5. Remove the existing power supply from your computer case and replace it

with your new Antec power supply.

6. Turn the hard switch on the Antec power supply to the OFF position and

connect the AC power cord to the power supply.

7. Connect the 24-pin Main Power Connector and the 4-pin +12V connector to

your motherboard as needed. If your motherboard uses a 20-pin connector;

detach the 4-pin attachment on the 24-pin power connector, see pictures 1

and 2. : the detachable 4-pin section cannot be Note

used in place of the 4-pin +12V connector.

8. Connect the peripheral power connectors to devices

such as hard drives, optical drives, etc.

9. Connect the Serial ATA connectors if you are using a

Serial ATA hard drive.

10. Connect the PCI Express power connector to your PCI

Express graphic card as needed.

11. Close your computer case.

Picture 1 Picture 2

Antec, Inc.

47900 Fremont Blvd.

Fremont, CA 94538

USA

tel: +1 510-770-1200

fax: +1 510-770-1288

Antec Europe B.V.

Sydneystraat 33

3047 BP Rotterdam

The Netherlands

tel: +31 (0) 10 462-2060

fax: +31 (0) 10 437-1752

Customer Support:

US & Canada

1-800-22ANTEC

customersupport@antec.com

Europe

+31 (0) 10 462-2060

europe.techsupport@antec.com

www.antec.com

All trademarks are the property of their respective owners.

Reproduction in whole or in part without written permission is prohibited.

Printed in China.

Version 1.0.6 05/04/2006

Product specificaties

Merk:	Antec
Categorie:	Computervoeding
Model:	BP500U - GB
Gewicht:	2300 g
Certificering:	FCC Class B
Veiligheid:	TUV, UL, CUL, CE, CB, FCC
Mean time between failures (MTBF):	80000 uur
Totaal vermogen:	500 W
Afmetingen (B x D x H):	149 x 158 x 85 mm
Bedrijfstemperatuur (T-T):	10 - 50 °C
ATX Power connector (24-pin):	Ja
Peripheral (Molex) power connectors (4-pin):	Ja
Aantal SATA power connectors:	2
Floppy drive power connector:	1
PCI Express power connectors (6-pin):	Ja