Antec BP350P - EC Handleiding

Antec Computervoeding BP350P - EC

Lees hieronder de 📖 handleiding in het Nederlandse voor Antec BP350P - EC (3 pagina's) in de categorie Computervoeding. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

Basiq

Models: BP350, BP350P

User’s Manual

Manuel de l’utilisateur

Anwenderhandbuch

Manuale per l’operatore

Manual del usuario

Antec Basiq User’s Manual

ATX12V version 2.01 power supply

Models: BP350/BP350P

Antec Basiq series power supplies are built to be compatible with the ATX12V

version 2.01 specification. They include dual 12V output circuitry that delivers

safer and more reliable output to your system’s components, as well as higher

energy efficiency, which reduces power consumption by up to 25%, saving you

money on your electricity bill. In addition we’ve included a variety of protective

circuitry: OPP (Over Power Protection), OVP (Over Voltage Protection), and SCP

(Short Circuit Protection).

Passive Power Factor Correction (applicable only to models designed for sale in

the European Union): BP350P designed for the EU include Power Factor Correction

(PFC) circuitry in accordance with European standard regulation code EN61000-3-2.

Power Switch: This power supply comes with a main power switch. Make sure

you turn the switch to the ON ( I ) position before you boot up your computer for

the first time. In normal operation there is no need to turn the switch to the OFF

(O) position since the power supply is equipped with a soft on/off feature which

turns your computer on and off through the soft switch on your computer case.

You may need to turn the switch to the OFF position occasionally should your

computer crash and you cannot shut it down through use of the soft switch.

Installation:

1. Turn off the hard switch on your power supply if any.

2. Open your computer case. Follow the directions provided in your case manual.

3. Disconnect all power connectors from the motherboard and from the peripheral

devices such as case fans, hard drives, optical drives, floppy drives, etc.

4. Disconnect the power cord from your old power supply.

5. Remove the existing power supply from your computer case and replace it

with your new Antec power supply.

6. (NOT applicable to models designed for the European Union): Before you Note

install your new power supply, check the red power supply voltage switch

setting. It should match your local power voltage (115V for North America,

Japan, etc., 230V for Europe, South East Asia, and many other countries).

Change the voltage setting if necessary. If you use the wrong voltage setting,

you could damage your system and void your warranty.

7. Turn the hard switch on the Antec power supply to the OFF position and

connect the AC power cord to the power supply.

8. Connect the 24-pin Main Power Connector and the

4-pin +12V connector to your motherboard as

needed. If your motherboard uses a 20-pin connector;

detach the 4-pin attachment on the 24-pin power

connector, see pictures 1 and 2. : the detach-Note

able 4-pin section cannot be used in place of the 4-pin

+12V connector.

9. Connect the peripheral power connectors to devices such as hard drives,

optical drives, etc.

10. Connect the Serial ATA connectors if you are using Serial ATA hard drive.

11. Close your computer case.

Picture 1 Picture 2

Antec, Inc.

47900 Fremont Blvd.

Fremont, CA 94538

USA

tel: +1 510-770-1200

fax: +1 510-770-1288

Antec Europe B.V.

Sydneystraat 33

3047 BP Rotterdam

The Netherlands

tel: +31 (0) 10 462-2060

fax: +31 (0) 10 437-1752

Customer Support:

US & Canada

1-800-22ANTEC

customersupport@antec.com

Europe

+31 (0) 10 462-2060

europe.techsupport@antec.com

www.antec.com

All trademarks are the property of their respective owners.

Reproduction in whole or in part without written permission is prohibited.

Printed in China.

Version 1.0.6 05/04/2006

Product specificaties

Merk:	Antec
Categorie:	Computervoeding
Model:	BP350P - EC
Kleur van het product:	Grijs
Gewicht:	1220 g
Geluidsniveau:	- dB
Afmetingen verpakking (BxDxH):	197 x 113 x 209 mm
Certificering:	RoHS
Stroomspanning bescherming:	Over current, Over voltage, Short circuit
Compatibele producten:	PC
Veiligheid:	UL, CUL, FCC Class B, CB, TÜV
Gewicht (imperiaal):	2.7 lbs
Totaal vermogen:	350 W
Afmetingen (B x D x H):	148 x 140 x 89 mm
AC-ingangsspanning:	115 - 230 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 50 °C
Ventilator diameter:	80 mm
Peripheral (Molex) power connectors (4-pin):	4
Vormfactor van de voeding (PSU):	ATX
Aantal SATA power connectors:	1
Floppy drive power connector:	1
ATX power connector (20+4 pin):	Ja
Power rocker switch:	Ja