Anker PowerWave Evo Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Anker PowerWave Evo (6 pagina's) in de categorie Oplader voor mobiel apparaat. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
EN
LED Indicator Status
Solid blue for 3
seconds, then
off
Connected to power
Solid blue Charging mobile device
Flashing blue
- Metal or abnormal temperature detected
- Using a non-Quick Charge™ 3.0 wall
charger
T
 For the fastest and safest charge, use the
supp lie d Anker® cha rger or a charge r
compliant with the Quic k Charge 3.0
Standard (supporting 12V). Other chargers
may not work well with this device.
 Using an ultra-thick protective phone case
or a case with a magnetic/iron plate is not
recommended as it may affect the wireless
charging function.
Important Safety Instructions
 Avoid dropping.
 Do not disassemble.
 Do not expose to liquids.
 For the safest and fastest charge, use original or
certified cables.
 This product is suitable for moderate climates only.
 The maximum ambient temperature during use of
this product must not exceed 40°C.
 Open flame sources, such as candles, must not be
placed on this product.
 Only use a dry cloth or brush to clean this product.
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including inte rference that may cause undesired
operation.
Warning: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on
a circuit different from that to which the receiver is
connected. (4) Consult the dealer or an experienced
radio / TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and ope rated with
minimum distance of 10 cm between the radiator &
your body.
IC Statement
This device complies with RSS-216 of Industry Canada.
Operation is subject to the condition that this device
does not cause harmful interference.
Specifications
Input 12 V 1.5 A
Output 5 W / 7.5 W / 10 W
Size 82 x 68 x 118 mm / 3.2 x 2.7 x 4.6 in
Weight 127g/ 4.5 oz
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the
product type A2525 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
https://www.anker.com/products
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
DE
LED-Anzeige Status
Leuchtet 3 Sekunden
lang blau, dann aus
An Stromversorgung
angeschlossen
Leuchtet blau Mobilgerät lädt
Blinkt blau
- Metall oder ungewöhnliche
Temperatur erkannt
- Verwendung eines anderen
Ladegeräts als Quick Charge™ 3.0
T
 Am schnellsten und sichersten erfolgt der
Ladevorgang mit dem Anke Ladegerät aus
dem Lieferumfang oder mit einem Quick
Charge 3.0-kompatiblen Ladeget (mit
12-V-Unterstützung). Andere Ladegeräte
funktionieren bei diesem Gerät u. U. nicht.
 Vo n d e r Ve r w e n d u n g e x t r a s t a r k e r
Smartphone-Schutzhüllen oder Schutzhüllen
mi t Magnet- bzw. Metalle insätzen wird
abgeraten, da diese die kabellose Ladefunktion
beeinträchtigen können.
Wichtige Sicherheitsinformationen
 Nicht fallenlassen.
 Nicht zerlegen.
 Keinen Flüssigkeiten aussetzen.
 Zum sichersten und schnellsten Laden nur Original-
oder zertifizierte Kabel verwenden.
 Das Produkt ist nur zur Verwendung in gemäßigten
Klimazonen konzipiert.
 Di e maximale Umgebungstemperatur während
der Verwendung des Produkts darf 40 °C nicht
übersteigen.
 Offene Flammen wie z. B. Kerzen dürfen nicht auf das
Produkt gestellt werden.
 Reinigen Sie das Produkt nur mit einem trockenen
Tuch oder einem Pinsel.
Technische Daten
Eingang 12 V 1.5 A
Ausgang 5 V / 7.5 W / 10 W
Abmessungen 82 x 68 x 118 mm
Gewicht 127g
01 02 03 04
JP
LED インジケーター 意味
青色に 3 秒間点灯後に消灯 電源に接続
青色の点灯 モバイル機器の充電
青色の点滅
- 金属または異常な温度が検出さ
れました
- Quick Charge™ 3.0 非対
器が使用されています
T
すばやく安全に充電するため、付属の Anker®
Quick Charge™ 3.0 格(12V
対応)に準拠している充電器をご使用くださ
い。その他の充電器では正常に充電できない
場合があります
ワイヤレス充電がうまく実行されない可能性
があるため、スマートフォンに極端に分厚い
ケースやマグネット式もしくは鉄製のケース
をつけたままのご使用はお控えください
安全上のご注意
過度な衝撃を与えないでください
危険ですので分解しないでください。
水分に触れないようにしてください。
すばく安全に電すため、正または証さ
たケーブルをご使用ください。
本製品は極端に暑いもしくは寒い気候での利用には
適しておりません。
本製品の周囲の気温が 40℃ を超える場合、使用しな
いでください。
ろうそくのような火がついた物体を本製品の上に置
かないでください。
本製のお手入をす際は、いた布もくは
ラシのみを使用してください。
05 06 0807
仕様
入力 12 V 1.5 A
出力 5 W / 7.5 W / 10 W
サイズ 82 x 68 x 118 mm / 3.2 x 2.7 x 4.6 in
重量 127g/ 4.5 oz
FR
Indicateur LED État
Bleu fixe pendant
3 secondes, puis s'éteint
En tension
Bleu fixe Appareil mobile en charge
Bleu clignotant
- Présence de métal ou température
anormale détectée
- Utilisation d'un chargeur mural
autre que Quick Charge™ 3.0
T
 Pour le processus de charge le plus rapide et
le plus r, utilisez le chargeur Ankefourni
ou un chargeur compatible avec la norme
Quick Charge™ 3.0 (prenant en charge 12 V).
Les autres chargeurs peuvent ne pas bien
fonctionner avec cet appareil.
 L'utilisation d'un étui de protection ultra-épais
ou avec une plaque magnétique/en fer n'est
pas recommandée : cela risquerait d'affecter
la fonction de charge sans fil.
Instructions importantes de sécurité
 Ne pas faire tomber.
 Ne pas démonter.
 Ne pas exposer à des liquides.
 Pour obtenir la charge la plus sûre et la plus rapide,
utiliser des câbles d'origine ou certifiés.
 Ce prod uit est adapté unique ment aux cli mats
modérés.
 La tempé ratu re ambi ant e max ima le pen dan t
l'utilisation de ce produit ne doit pas dépasser 40 °C.
 Ce produit ne doit pas être exposé à des sources de
flamme nue, notamment des bougies.
 Nettoyez ce produit uniquement avec un chiffon sec
ou une brosse.
Spécifications techniques
Entrée 12 V 1.5 A
Sortie
5 W / 7.5 W / 10 W
Taille 82 x 68 x 118 mm / 3.2 x 2.7 x 4.6 in
Poids 127g/ 4.5 oz
IT
Indicatore LED Stato
Blu fisso per 3 secondi, poi
si spegne
Collegato a una fonte di
alimentazione
Blu fisso Ricarica del dispositivo mobile
Blu lampeggiante
- Presenza di metallo o
temperatura anomala rilevata
- Utilizzo di un caricabatterie da
parete non Quick Charge™ 3.0
T
 Per una ricarica rapida e più sicura, utilizzare
il caricabatterie Anker® fornito in dotazione
o un caric abatte rie compatibile con lo
standard Quick Charge3.0 che supporti 12
V. Altri tipi di caricabatterie potrebbero non
funzionare correttamente con il dispositivo.
 Si consiglia di non utilizzare custodie protettive
piuttosto spesse o dotate di una
piastra
magnetica o i n ferro poic hé potrebbero
interferire con la funzione di ricarica wireless.
Informazioni importanti sulla sicurezza
 Non fare cadere il prodotto.
 Non smontare il prodotto.
 Non esporre il prodotto a liquidi.
 Per effettuare la carica in modo rapido e sicuro,
utilizzare i cavi originali o certificati.
 Il prodotto è adatto all'utilizzo in climi moderati.
 Il prodotto deve essere utilizzato in ambienti a
temperatura non superiore ai 40° C.
 Non collocare sorgenti di fiamme libere, ad esempio
candele accese, sul prodotto.
 Per pulire il prodotto, utilizzare esclusivamente un
panno asciutto o una spazzola.
Specifiche
Ingresso 12 V 1.5 A
Uscita 5 W / 7.5 W / 10 W
Dimensioni 82 x 68 x 118 mm
Peso 127g
󻷠󻭣󽴔󻨗󻳓󽴔󻺏󼌷
󺩷󻪃󺯷󺹻󻺏󽴔󺺗󻞼󻞫󻫳 
󻉓󼩃󼨧󻺏󽴔󺺗󻞼󻞫󻫳 
󻨰󼆃󻪟󽴔󺟎󻺏󽴔󻨙󺢓󺴬󽴔󻷋󻰧󼨧󻞼󻞫󻫳 
󻨗󻳓󼨧󺆯󽴔󻌯󺹇󽴔󼉸󻳓󻰓󽴔󻯓󼩃󽴔󻳤󼥗󽴔󺫟󺝣󽴔󻱇󻹬󽴔󼏏󻱃󻋣󻰓󽴔󻕻󻭸󼨧󻞼󻞫
󻫳 
󻱃󽴔󻳫󼥗󻰏󽴔󻳐󻳤󼨫󽴔󺋿󼮓󻪟󻗫󺺛󽴔󻕻󻭸󼨧󺋿󽴔󻳐󼨸󼨸󺞗󺞳 
󻳫󼥗󽴔󻕻󻭸󽴔󻞫󽴔󼈫󺆯󽴔󻷋󻯓󽴔󻫷󺢓󺝣  󺹋󽴔󼇗󺇋󼨧󺽃󽴔󻨗󽴔󺣸󺞗󺞳 
󻩠󼇗󻬏󽴔󺃨󻰏󽴔󼬣󻫋󻮟󻰓󽴔󻱃󽴔󻳫󼥗󽴔󻯓󻪟󽴔󺙢󻰋󺽃󽴔󻨗󽴔󺣸󺞗󺞳 
󻳫󼥗󻰓󽴔󼅼󻙛󼨯󽴔󺨛󺝣󽴔󺺗󺹇󽴔󼅫󽴔󺫟󺝣󽴔󻋛󺲻󻞫󺺛󽴔󻕻󻭸󼨧󻞼󻞫󻫳 
󼩃󺟈󻀃󻗯󻗳󻌓󺋿󺋿󺝣󽴔󻮃󻭸󽴔󻷠󽴔󻳓󼟛󼬋󻞯󺃏󺝴󻘀󻱃󽴔󻱗󻰋󻂏󺴫󽴔󻱇󺽔󻨗
󻳓󺇋󽴔󺇏󺳷󺣫󽴔󻗫󻌓󻝳󺝣󽴔󼨯󽴔󻛧󽴔󻪕󻞄󺞗󺞳
󻕻󻩠
󻱔󺳴 12 V 1.5 A
󼉫󺳴 5 W / 7.5 W / 10 W
󼔻󺋿 82 x 68 x 118 mm / 3.2 x 2.7 x 4.6 in
󻀃󺅛 127g/ 4.5 oz
󼩃󺟈󻀃󻗯󻗳󻌓󺋿󺋿󺝣󽴔󻮃󻭸󽴔󻷠󽴔󻳓󼟛󼬋󻞯󺃏󺝴󻘀󻱃󽴔󻱗󻰋󻂏󺴫󽴔󻱇
󺽔󻨗󻳓󺇋󽴔󺇏󺳷󺣫󽴔󻗫󻌓󻝳󺝣󽴔󼨯󽴔󻛧󽴔󻪕󻞄󺞗󺞳
AR
󸡿󷦴󲔞󱌍󹏣󵛽
󸘚󱋞󳍉󶽆
󷸽󱖢󳈓󱙹
󷸽󱖢󳣑󹆫󱲉󴓋󰽥󰶦
󷦴󲔞󱌍󲴰󸔠󱋏󵉐󼵼󷸽󰾫󵈾󱚳󷠴󳃵󶑒󸑃󷷪󷸇󵒹󳚩󳌙󶑂
󳦦󰹢󱡸󰺒󸓔󱝗󱲉󸓔󲫟󵒹󴖜󲫟󴾡󱺰󰶦󰾫󵈾
󳦦󰹢󱡸󰵷󲲥󱲉󸂅󸑃 󵒹󲕕󱌼󴾡󱺰󰶦󰾫󵈾
󵦝󴃻󱲉󳦦󰹢󱡸󰵴󳙟󶔩󳟉󴦡󴙃󼵸󲁶󷕚󴩿󼵹
󱜬󶡋󰾫󵈾󲪂󲧓󳃵󱑙󲒪󴕢󴏈󳦦󰹢󱡸
󷨟󳭕
󸏖󱌇 12 V 1.5 A
󸏖󱐁 5 W / 7.5 W / 10 W
󲙰󲘅 82 x 68 x 118 mm / 3.2 x 2.7 x 4.6 in
󸡿󸢁 127g/ 4.5 oz
KO
LED 󼤫󻞫󺧀 󻖐󼖫
󼟛󺱏󻖘󽴔󻳟󺧀 3󼇗  󼮓󽴔󺎋󻺟 󻳓󻮟󻱃󽴔󻪿󺅿󺣷
󼟛󺱏󻖘󽴔󻳟󺧀 󺽷󻃣󻱋󽴔󻱴󼌧󽴔󼉸󻳓󽴔󻷠
󼟛󺱏󻖘󽴔󻳟󺽇 󺋗󻙜󽴔󺫟󺝣󽴔󻌓󻳤󻖐󻳐󻱇󽴔󻫷󺢓󽴔󺃟󻺏
󻌓  󻆌󽴔󼉸󻳓󺋿󽴔󻕻󻭸
T
󻌯󺹃󺆯󽴔󻨗󻳓󼨫󽴔󼉸󻳓󻰓󽴔󻯓󼩃󽴔󻳫󺇄󺣧󺝣󼉸󻳓󺋿
󺫟󺝣 󼤫󻷏 󻺏󻮟  󺇋󽴔󼬇󼬧
󺣧󺝣󽴔󼉸󻳓󺋿󺹋󽴔󻕻󻭸󼨧󻞼󻞫󻫳 󺞳󺹇󽴔󼉸󻳓󺋿󺹋󽴔󻕻󻭸󼨯
󺆌󻭿󽴔󻱃󽴔󻱴󼌧󺃏󽴔󻳫󺟏󺴫󽴔󻱠󺢨󼨧󻺏󽴔󻨙󻰓󽴔󻛧󽴔󻱗󻞄󺞗󺞳 
󺺳󻭿󽴔󺤟󺎋󻮃󽴔󼰃󺟏󼢿󽴔󻇃󼬇󽴔󼏏󻱃󻝳󽴔󺫟󺝣󽴔󻱟󻗬  󺋗󻙜󼟟
󻱃󽴔󺞻󺹿󽴔󼏏󻱃󻝳󻰧󽴔󺆌󻭿󽴔󻀃󻗯󽴔󼉸󻳓󽴔󺋿󺝴󻪟󽴔󻫐󼩴󻰓󽴔󻷓
󻛧󽴔󻱗󻰋󻂏󺴫󽴔󻕻󻭸󻰓󽴔󺉛󻱴󼨧󻺏󽴔󻨙󻞄󺞗󺞳
ES
Indicador LED Estado
Azul fijo durante 3 segundos,
después se apaga
Conectado a la alimentación
Azul fijo Cargando dispositivo móvil
Parpadeo azul
- Metal o temperatura anómala
detectado
- Usando un cargador de pared
que no sea Quick Charge™ 3.0
T
 Para cargar más rápido y con más seguridad,
utilice el cargador Anker® suministrado o uno
compatible con el estándar Quick Charge
3.0 (compatible con 12 V). Otros cargadores
podrían no funcionar bien con este dispositivo.
 No se recomienda utilizar una fund a de
teléfono prote ctora muy gruesa ni una
funda con placas magnétic as/metálicas,
ya que puede afectar a la función de carga
inalámbrica.
Instrucciones de seguridad importantes
Evite las caídas.
No desmonte el producto.
No lo exponga a líquidos.
Para cargar de la forma más rápida y segura, utilice
cables originales o certificados.
Es te pro d uc to solo e s ad ecuado para climas
moderados.
La temperatura ambiente máxima durante el uso de
este producto no debe superar los 40 °C.
No se deben colocar fuentes de llama desprotegidas,
como velas, sobre este producto.
Utilice solo un paño o cepillo seco para limpiar este
producto.
Especificaciones
Entrada 12 V 1.5 A
Salida 5 W / 7.5 W / 10 W
Tamaño 82 x 68 x 118 mm / 3.2 x 2.7 x 4.6 in
Peso 127g/ 4.5 oz
PT
Indicador de LED
Status
Azul constante por
3 segundos, em
seguida, desligado
Conectado à energia
Azul constante Carregar o dispositivo móvel
Luz azul piscando
- Metal ou temperatura anormal detectado
- Usando um carregador de parede sem
Quick Charge™ 3.0
T
 Para carregar mais rápido e com segurança,
use o carregador Anker® fornecido com o
produto ou um carregador compatível com
o padrão Quick Charge 3.0 (com suporte
a 12 V). Outros carregadores podem não
funcionar bem com este dispositivo.
Não é recomendado usar uma capa ultra-
grossa com placa magnética/de ferro para
proteger o dispositivo, pois isso pode afetar a
função de carregamento sem fio.
Instruções importantes de segurança
Evite deixar cair.
Não desmonte.
Não exponha a líquidos.
 Para carregar com rapidez e seguraa, use cabos
originais ou certificados para uso.
 Este prod uto é adeq uado somente para climas
moderados.
 A temperatura ambiente máxima durante o uso deste
produto não deve exceder 40 °C.
 Fontes abertas com chama, como velas, não devem
ficar próximas a este produto.
 Use somente um pano seco ou um pincel para limpar
o produto.
Especificações
Entrada 12 V 1.5 A
Saída 5 W / 7.5 W / 10 W
Tamanho 82 x 68 x 118 mm / 3.2 x 2.7 x 4.6 in
Peso 127g/ 4.5 oz
CN
LED 󳉸󵤚󴦨 󴸑󲵗
󲨣󰹮󷂱󶮁 3 󵨳󼵼󴬭󱝠󴯇󴦤 󲦻󸑷󳍺󵉐󴙃
󲨣󰹮󷂱󶮁 󰶺󵩵󱔔󷸄󱾋󱋏󵉐
󸽹󴩍󷂱󶮁
󳰭󴐶󱑍󸢅󲚪󳃵󲮘󲨣󴖜󲫟
󰾫󵈾󹈌  󱼘󲮮󱋏
󵉐󱬽
T
󰶺󰸬 󶸧󱜌󲴰󸔠󰶃 󲔞󱌍󵒹󱋏 󵉐󼵼󷸽󰾫󵈾󹁦 󸿢󵒹
󱋏󵉐󱬽󳃵󵳘󱝗  󳫼󱎦󼵸󳙆
󳉰󼵹󵒹󱋏󵉐󱬽󱌧󰺮󱋏󵉐󱬽󱜴󶡋󳝾󴎂󴃼󲨣󰾫
󵈾󴃽󷸄󱾋
󸂅󱚪󵒹󳅜󳦽󱁃󳇢󱽳󳃵󱌩󳥤󵡃 󸸉󳨤󵒹󳅜󳦽󱽳󱜴󶡋
󰼕󲱨󱢈󳝾󶑂󱋏󵉐󱔇󶡋󼵼󰵷󲮋󷷴󰾫󵈾
support@anker.com
suporte@ankeroficial.com.br
(US) +1 (800) 988 7973 Mon-Fri 9:00 - 17:00 (PT)
(UK) +44 (0) 1604 936200 Mon-Fri 6:00 - 11:00 (GMT)
(DE) +49 (0) 69 9579 7960 Mon-Fri 6:00 - 11:00
(󳞉󳦦) +81 03 4455 7823 󳥣-󸢅 9:00 - 17:00
(󰶦󱱃) +86 400 0550 036 󱟰󰵨󶩜󱟰󰹁 9:00 - 17:30
(BR)4003-0957 (Capitais e regiões metropolitanas)
ou 0800 888 0957 (Demais localidades)
Seg-Sex 8:00-18:00
@Anker
@Anker Japan
@Anker Deutschland
@AnkerOfficial
@Anker_JP @Anker
09 10 11 12 13 14 15 16
T
12 V 1.5 A
5 W / 7.5 W / 10 W
82 x 68 x 118 mm / 3.2 x 2.7 x 4.6 in
127g/ 4.5 oz
For indoor use only.
This symbol means the product must not be
discarded as household waste, and should
be delivered to an appropriate collection
facility for recycling.
Customer Service
DE: Kundenservice JP: カスタマーサポー
FR: Service Client IT: Servizio Clienti
ES: Atencn al Cliente
PT: Serviço ao cliente
CN: 󲕑󳥫󳙆󳉰 KO: 󺆯󺃬󽴔󻗫󻌓󻝳
: 
For FAQs and more information, please visit:
www.ankeroficial.com.br
www.anker.com
51005001016 V01
A2525
EN: 18-month limited warranty
DE: 18 Monate beschnkte Herstellergarantie
JP: 18 ヶ月保証
FR: Garantie de 18 mois
IT: Garanzia valida 18 mesi
ES: Garantía limitada de 18 meses
PT: Garantia limitada de até 18 meses
CN: 18󰶢󳥣󸀙󱁃󳦎
KO: 18󺃫󻮣 󻳫󼨫 󻇃󻹬
AR: 
 18 
EN: Lifetime technical support
DE: Lebenslanger technischer Support
JP: クニルサート
FR: Support technique à vie
IT: Assistenza post-vendita a vita
ES: Asistencia cnica de por vida
PT: Suporte técnico vitalício
CN:󶑋󸉨󲕑󳥫󳙆󳉰
KO:󼢘󻖬 󺋿󻛯 󻺏󻮟
AR: 
PowerWave
Evo Stand


Product specificaties

Merk: Anker
Categorie: Oplader voor mobiel apparaat
Model: PowerWave Evo

Heb je hulp nodig?

Als je hulp nodig hebt met Anker PowerWave Evo stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Oplader voor mobiel apparaat Anker

Handleiding Oplader voor mobiel apparaat

Nieuwste handleidingen voor Oplader voor mobiel apparaat