Angelcare AC1100 Handleiding

Angelcare Babyfoon AC1100

Lees hieronder de 📖 handleiding in het Nederlandse voor Angelcare AC1100 (91 pagina's) in de categorie Babyfoon. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/91

AC1100

Platinum edition

EN Baby Monitor with video, sound & Movement Sensor Pad...............................................................2

FR Moniteur pour bébés avec vidéo, sons et détecteur de mouvements............................................11

ES Monitor de video y sonidos con sensor de movimientos................................................................19

PT Intercomunicador para bebés com som, vídeo e detecção de movimentos ..................................27

NL Video, Geluid en Bewegingsmonitor...............................................................................................35

SV Video-, rörelse- och ljudbevakning av spädbarn............................................................................43

DA Babyalarm med video, bevægelses- og lydindikation ....................................................................51

FI Vauvan video-, liike- ja äänimonitori..............................................................................................59

PL Monitor oddechu (ruchu) z nianiąelektronicznąi kamerąvideo ...................................................67

HU Video-légzésfigyelőkészülék kétirányú babaőrzővel...................................................................75

AC1100 INTER REV. 19052011

MANUEL AC1100 INTERNATIONAL_Manuel AC1100 11-05-19 3:53 PM Page 1

WARNINGS

Failure to follow these warnings and the assembly instructions

could result in serious injury or death.

This product is designed to aid in the monitoring of your child.

When using the monitor, you must still provide the supervision

necessary for the continued safety of your child. Always be sure

that both the transmitter and receiver are working properly and

are within range of each other.

This product is NOT a substitute for direct supervision of

your baby. Check your baby’s activities at regular intervals.

Monitoring of premature babies, or those considered to be at

risk, should always be carried out under the supervision of a

health professional.

STRANGULATION HAZARD. Keep the adapter cords out of the

reach of children. Do not use with extension cords.

DO NOT place the Nursery Unit or its cord within your child’s

reach. Do not put the Nursery Unit inside a crib or playard.

Allow for proper ventilation when units are in use. Do not cover

the Nursery Unit or Parent Units with any object such as a blan-

ket. Do not place it in a drawer or in any location which would

muffle the sound or interfere with the normal flow of air.

DO NOT immerse any part of the Nursery Unit, Parent Unit, Sen-

sor Pad, adapters or docking station in water or any other liq-

uid. Clean only with a dry cloth.

DO NOT place unit near water and moisture. Do not use the

Nursery Unit outdoors. Do not use the Nursery Unit near possi-

ble wet areas, such as a bathtub, shower, wash basin, sink,

laundry tub, swimming pool, wet basement, etc.

Keep Nursery Unit away from heat sources, such as fireplaces,

radiators, stoves, and TVs or other appliances. Heat can dam-

age the case or electrical parts.

DO NOT put the parents unit near wireless devices or a mi-

crowave oven. Such devices can disrupt the transmission of

the alarm signal.

WARNING: This product is not a toy.

Do not use the Nursery Unit if:

- The adapter cords or plugs have been damaged.

- The unit has been exposed to liquids.

- Unit has been dropped or is damaged.

DO NOT OPEN the Nursery Unit, Parent Unit, Parent Unit base,

Sensor Pad or adapters. No user-serviceable parts inside. Risk

of electrical shock, fire or death.

The antenna used for this transmitter must be installed to pro-

vide a separation distance of at least 20 cm (7.9”) from all per-

sons and must not be collocated or operating in conjunction

with any other antenna or transmitter.

IMPORTANT: You must use only rechargeable batteries in the

Parents Unit. DO NOT use alkaline batteries or you will severely

damage the unit. Charge the batteries for 16 hours prior to first

use. Be sure to have the monitor in the OFF position during this

period. Only use the AC adapters included with your monitor.

DO NOT use these adapters with any other equipment.

When unplugging the AC adapter from the Nursery Unit, be sure

it is switched to the off position. If it isn’t, the unit will revert to

battery mode if batteries are installed.

You can use rechargeable batteries in the Nursery Unit, how-

ever, they will not be recharged by plugging in the AC adapter.

To recharge, remove the batteries and use an external charger.

Always place both the Nursery Unit and Parents Unit on a flat

surface in an upright position and allow for proper ventilation.

Avoid damage to the Sensor Pad cord and to the adapter cords.

Route cords so that they are not likely to be walked on or

pinched by items placed on or against them.

DO NOT use this monitor if the Sensor Pad cord and/or the

adapters cords are damaged.

Route Sensor Pad cord only below crib mattress and out of

reach of children.

Use ONLY AAA (LR03) rechargeable batteries and/or the AC

adapters provided for the Parents Unit.

During long periods of non-use remove all batteries from their

compartments and unplug the AC adapters.

This monitor uses public airwaves to transmit signals. The Par-

ents Unit may pick up signals or interference from other nurs-

ery monitors in your area. Your monitor may even be picked up

by other households. To protect your privacy, make sure both

units are turned off when not in use.

When the monitor is in use, do not use a crib mobile or other

crib accessories that may produce vibrations. Other sources of

vibrations may include fans, washing machines, loud music,

etc. These sources of vibration may interfere with the perform-

ance of your Angelcare® monitor and the alarm will not sound

if it continues to detect any movement other than your baby’s.

Be sure all vibration sources are eliminated before using the

monitor.

You may experience false alarms for several reasons. The most

common reason is the Nursery Unit has not been turned off

after you have removed your baby from the crib. Another reason

is if the Sensor Pad has not been placed under the mattress

properly. Be sure the Sensor Pad is on a flat, firm surface with

the printed side facing up. The sensitivity level may also need

to be adjusted. Refer to the Movement Sensitivity Adjustment

section.

Always be sure to immediately check on baby whenever an

alarm sounds.

Your monitor can be used in any crib that is stationary and de-

signed to safely hold a baby. If your crib has a spring or slat base

you will need to place a piece of Masonite board under the Sen-

sor Pad. This support must be at least 13 inches long on all four

sides and 1/4 inch thick. Only use your Angelcare® monitor in

a stationary sleeping environment such as a crib where the Sen-

sor Pad can rest on a completely flat, firm surface.

FCC WARNINGS

Modifications not authorized by the manufacturer may void

users authority to operate this device.

NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a res-

idential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harm-

ful interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference

by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and

receiver.

- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician

for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, in-

cluding interference that may cause undesired operation.

STRANGULATION HAZARD. Keep the adapter cord

and the sensor pad cord out of the reach of children.

Because of the serious strangulation risk to infants and

toddlers, parents and caregivers should never place

the nursery unit within 3 feet (1 metre) of a crib.

MANUEL AC1100 INTERNATIONAL_Manuel AC1100 11-05-19 3:53 PM Page 2

Sensor Pad 3 AAA rechargeable

batteries for Parents Unit

3 AAA regular batteries for

Nursery Unit battery back-up

Nursery Unit 2 AC adapters for Nursery Unit

and for Parents Unit charger

Installation in the Baby’s room...............................................................................................................................................................................................3

Nursery Unit set up ...............................................................................................................................................................................................................4

Parents Unit set up................................................................................................................................................................................................................4

Testing our Angelcare® monitor............................................................................................................................................................................................4

Parents Unit settings .............................................................................................................................................................................................................5

Troubleshooting.....................................................................................................................................................................................................................8

Warranty ..............................................................................................................................................................................................................................9

Maintenance of your Angelcare® monitor .............................................................................................................................................................................9

Factory settings and technical specifications.........................................................................................................................................................................9

STEP 1 - Installation in the Baby’s room

Rechargeable Parents

Unit and charger

Table of content

Hard fiberboard

(Masonite)

NOT INCLUDED

• Position the Nursery Unit facing

the crib.

• Adjust camera angle with

rotating dial.

Sensor Pad

Mattress

Sensor Pad cord

Masonite fiberboard

(not included)

Secure the Sensor Pad cord

Owner’s Manual

Keep instructions for future reference

INCLUDED

•The Sensor Pad must rest on a completely flat and rigid surface. Place a 6mm (1/4'') thick Masonite board to cover the full size of the crib or with minimum dimensions of

28cm (11'') X 28cm (11'') X 6mm (1/4'') between the crib base and mattress,when using one Sensor Pad. The board will push the Sensor Pad into the mattress and keep

the contact between the Sensor Pad and the mattress, should the baby move around. Make sure the Sensor Pad’s cord passes underneath the mattress as shown.

•Position the Sensor Pad as shown, in the center of the crib. Make sure the printed side faces up. Do not place any bedding between the mattress and the Sensor Pad.

•Secure the Sensor Pad cord to the crib using a tie wrap. Run the cord on the floor to ensure it is out of the baby’s reach.

• The Sensor Pad works with all baby bed sizes and all mattresses, except memory foam mattresses or mattresses with a hollow frame. You will need to test your Sensor Pad after

the set-up is completed.

• The Nursery Unit can also be installed on a tripod (not included).

I sensor pad 2 sensor pads

POSITION OF SENSOR PAD UNDER MATTRESS

Crib center Crib center

INSTALLATION OF THE SENSOR PAD UNDER THE MATTRESS

(Available in certain countries only)

MANUEL AC1100 INTERNATIONAL_Manuel AC1100 11-05-19 3:53 PM Page 3

Product specificaties

Merk:	Angelcare
Categorie:	Babyfoon
Model:	AC1100
Kleur van het product:	Grey, White
Beeldschermdiagonaal:	2.75 "
Frequentieband:	2404.125 - 2478.375 GHz
Type stroombron:	AC, Battery
Ingebouwde luidsprekers:	Nee
Ondersteund aantal accu's/batterijen:	3
Ingebouwde microfoon:	Nee
Nachtmodus:	Ja
Batterij bijna leeg-indicatie:	Ja
Maximumbereik:	200 m
Stem-geactiveerd:	Ja
Aantal kanalen:	64 kanalen
Batterijen inbegrepen:	Nee
Batterijtechnologie:	Nikkel-Metaalhydride (NiMH)
Type batterij:	AAA
Digitale zoomfunctie:	Ja
Temperatuursensor:	Ja
Nachtlampje:	Ja