American Standard Studio S 7105018 Handleiding
Pagina's 4 Niet gecategoriseerd
Bekijk de handleiding van American Standard Studio S 7105018 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017
Thank you for selecting American Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly-please
read these instructions carefully before you begin.
RECOMMENDED TOOLS
1
M965787 (3/17)
INSTALLATION OF MOUNTING BRACKETS FOR ALL WALL MOUNTED ACCESSORIES
STUDIO
®
S
18 TOWEL BAR"
24 TOWEL BAR"
TOWEL RING
ROBE HOOK
24 DOUBLE TOWEL BAR"
TOILET PAPER HOLDER
INSTALLATION
INSTRUCTIONS
7105.018
7105.024
7105.190
7105.210
7105.224
7105.230
Certied to comply with ANSI A112.18.1M
2
1
1
3
3
3/8" (9 mm)
3/4" (19 mm)
2
LEVEL
C
L
DRILL PILOT HOLE FOR
WOOD SCREW OR (2)
1/4" DIA. HOLE FOR
ANCHOR (3)
• The WALL MOUNTED ACCESSORIES work best if secured to a wall stud or cross brace within the wall, using the
SCREWS (2) supplied.
• the ACCESSORY is to be installed on a tile or plaster wall, the ANCHORS and SCREWS should be used. If(3)(2)
• Determine desired height and location (optional) and mark a center line. Make sure the centerline is level. Using the
MOUNTING BRACKET as a template, mark the two spots for the mounting holes. If MOUNTING BRACKET (1)(1)
is secured to a stud or cross brace. drill small pilot holes for SCREWS (2).
• For installations on tiled walls or drywall, use TILE ANCHORS and SCREWS for securing MOUNTING BRACKET (3)(2)(1) to
wall. Drill two 1/4 diameter holes a minimum of 1-1/4 deep. Insert the two TILE ANCHORS ""(3) ush with face of nished wall.
Place MOUNTING BRACKET over TILE ANCHORS and insert SCREWS provided with a at blade screwdriver. (1)(3)(2)
See illustration below.
• MOUNTING BRACKET Secure(1)
to wall with SCREWS (2).
Phillips Screwdriver
10'
Tape Measure
Drill
Level
Hex Key
Screwdriver
- 2 -
2
M965787 (3/17)
• Refer to for installation of MOUNTING BRACKETS . Align accessory and place ACCESSORY ESCUTCHEON Step 1(2)(1)
onto MOUNTING BRACKET Secure accessory with SET SCREW using a 2.5 mm HEX WRENCH (2)(3)(4).
TOWEL RING and ROBE HOOK INSTALLATION
2
3
4
3
4
1
1
FINISHED WALL
2
3
INSTALL TOILET PAPER HOLDER
• Refer to for installation of MOUNTING BRACKETS Step 1(1).
• the ACCESSORY ESCUTCHEONS on the MOUNTING BRACKET . Secure ACCESSORY Install(2)(1)
ESCUTCHEON with SET SCREW using a 2.5 mm HEX WRENCH (2)(3)(4).
2
4
LEVEL
C
L
1
3
3
4
1
FINISHED WALL
2
- 3 -
5
6
DO: CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
24 TOWEL BAR and DOUBLE TOWEL BAR INSTALLATION"
CARE INSTRUCTIONS:
18 TOWEL BAR INSTALLATION"
4
M965787 (3/17)
LEVEL
1
1
2
3
4
18" (457.2 mm)
3
4
1
FINISHED WALL
2
LEVEL
1
1
2
4
24" (609.6 mm)
3
1
3
4
1
FINISHED WALL
2
• Refer to for installation of MOUNTING BRACKETS Step 1(1). NOTE: The center line distance between the two
MOUNTING BRACKETS is 18 (457.2 mm). Make sure the two MOUNTING BRACKETS (1) are level."
• the ACCESSORY ESCUTCHEONS on the MOUNTING BRACKETS . Secure ACCESSORY ESCUTCHEONSInstall(2)(1)
(2)(3)(4) with SET SCREW using a 2.5 mm HEX WRENCH .
• Refer to for installation of MOUNTING BRACKETS Step 1(1). NOTE: The center line distance between the two
MOUNTING BRACKETS is 24 (609.6 mm) . Make sure the two MOUNTING BRACKETS (1) are level."
• the ACCESSORY ESCUTCHEONS on the MOUNTING BRACKETS . Secure ACCESSORY ESCUTCHEONS Install(2) (1)
(2)(3)(4) with SET SCREW using a 2.5 mm HEX WRENCH .
Product specificaties
| Merk: | American Standard |
| Categorie: | Niet gecategoriseerd |
| Model: | Studio S 7105018 |
Heb je hulp nodig?
Als je hulp nodig hebt met American Standard Studio S 7105018 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden