American Audio Enferno Handleiding


Bekijk gratis de handleiding van American Audio Enferno (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over American Audio Enferno of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/4
User Instructions
Unpacking: Thank you for purchasing the Enferno™ by American DJ . ®
Every Enferno™ has been thoroughly tested and has been shipped
in perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your unit for any damage and be sure
all equipment necessary to operate the unit has arrived intact. In the
event damage has been found or parts are missing, please contact our
toll free customer support number for further instructions. Please do not
return the unit to your dealer without rst contacting customer support.
Introduction: Please carefully read and understand the instructions in
this manual thoroughly before attempting to operate this unit. These
instructions contain important safety information regarding the proper
use and maintenance of this unit. Please keep this manual with the
unit, for future reference. The Enferno™ produces a unique flame
effect without the heat. This unit uses a silk drape cut out in the shape
of a flame that must be replace every 3-6 month of use to maintain the
orginal effect.
Customer Support: American DJ provides a toll free customer sup-®
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may also
visit us on the web at www.americandj.com for any comments or sug-
gestions. Service Hours are Monday through Friday 9:00 a.m. to 5:00
Voice: (800) 322-6337
Fax: (323) 582-2610
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
your nearest American DJ dealer.®
The shipping carton and packing materials are constructed of
recyclable material, please recycle when ever possible.
Enferno General Introduction
© ®American DJ Supply - www.americandj.com - Enferno™ Instruction Manual Page 2
American DJ ®
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
Rev. 10/03
Safety Issues: This unit may blow a fuse if the maximum allotted load
of 4 amps is reached. If the fuse needs replacement, always replace the
fuse with same exact type that was remove, unless otherwise instructed
by an authorized American DJ service technician. Use of a different ®
type fuse from that which is recommended may cause fire or electric
shock and will void the manufactures warranty.
To reduce the risk of electrical shock or re, do not expose this unit
rain or moisture
Do not spill water or other liquids into or on to your unit
Do not attempt to operate this unit if the power cord has been frayed
or broken
Do not attempt to remove or break off the ground prong from
the electrical cord. This prong is used to reduce the risk of electrical
shock and re in case of an internal short
Disconnect from main power before making any type of connection
Do not remove the cover under any conditions. There are no user
serviceable parts inside
Never plug this unit in to a dimmer pack
Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall
Do not attempt to operate this unit, if it becomes damaged
This unit is intended for indoor use only, use of this product outdoors
voids all warranties
During long periods of non-use, disconnect the unitʼs main power
Always mount this unit in safe and stable matter
Power cords should be routed so they are not likely to be walked on,
pinched by items placed upon or against them.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 6 for cleaning details
Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The unit does not appear to operate normally or exhibits a
marked change in performance.
Enferno Safety Warnings
Before beginning initial setup of your Enferno Flame Machine, make
sure there is no evident damage caused during transportation. In the
event that the unitʼs housing or cable is damaged, do not plug the unit in
and do not attempt to use. Please contact your dealer for assistance.
1. Remove all packing materials from the Enferno.
2. Place the Enferno™ on a at level surface.
3. A truss mount bracket is located underneath the unit. This bracket
allows the unit to mount to almost anything. Please contact
American DJ or see your dealer for more information.
4. Plug the power cord into a grounded electrical outlet with a match-
ing power supply.
5. Turn the power switch on the side of the unit to the “ON” position.
Enferno Set-Up/Operation
© ®American DJ Supply - www.americandj.com - Enferno™ Instruction Manual Page 4© ®American DJ Supply - www.americandj.com - Enferno™ Instruction Manual Page 3
Enferno Silk Drape
Your silk ame has been specially designed and hand cut from the
nest silk to interact with the airow and lights to create the illusion of a
ame. Each silk drape is applied prior to shipment and should be in the
correct position. The silk drape has a life of approximately one month
when used continuously in a clean environment. Additional silk drapes
may be purchased through your dealer (part number Z/Torch-Silk-2).
Silk Drape Maintenance:
If the silk drape has becomes creased you may iron the silk using a
non-drip iron. DO NOT STEAM IRON.
If the silk drape has becomes frayed use a sharp pair of scissors to
carefully cut the loose silk strands. The silk starts fraying after a period
of four weeks. This can happen sooner depending on the amount of
use and the environment.
Enferno Warranty
The Enferno™ carries a one year (365 days) limited warranty. We rec-
ommend you fill out the enclosed warranty card to validate your pur-
chase. All returned service items whether under warranty or not, must
be freight pre-paid and accompany a R.A. Number. If the unit is under
warranty, you must provide a proof of purchase invoice.
© ®American DJ Supply - www.americandj.com - Enferno™ Instruction Manual Page 6© ®American DJ Supply - www.americandj.com - Enferno™ Instruction Manual Page 5
Enferno Lamp Replacement
Halogen Lamp Warning! This fixture is fitted with
halogen lamps which are highly susceptible to
damage if improperly handled. Never touch the
lamps with your bare fingers as the oil from your
hands will shorten lamp life. Also, never move the
fixture until the lamps have had ample time to cool.
Remember, lamps are not covered under warranty
conditions.
Enferno Halogen Lamp Warning
Fuse Replacement:
Disconnect the unitʼs main power supply. Insert a standard flat head
screw driver in to the fuse holder housing (located on the side of the
unit). Turn the screwdriver in a counter-clockwise direction to remove
the fuse holder. Remove the old fuse and discard it, replace the fuse
with the same type. Insert the fuse holder back into itʼs housing and
turn in clockwise direction to lock the holder in place.
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning should be carried out
periodically to optimize light output. Cleaning frequency depends on
the environment in which the fixture operates (I.e. smoke, fog residue,
dust, dew). In heavy club use we recommend cleaning on a monthly
basis. Periodic cleaning will ensure longevity, and crisp output. Always
be sure the unit is turned off and unplugged before performing any
cleaning procedures.
1. Use normal glass cleaner and a soft cloth to wipe down the outside
casing.
2. Use a brush to wipe down the fan grill.
3. Wipe down the colored bulb covers with a damp cloth to remove
residue.
4. Always be sure to dry all parts completely before plugging the unit
back in.
Caution:
Always replace with the exact same type lamp and fuse, unless oth-
erwise specified by an authorized American DJ technician. Replace ®
with anything other than the specified part can damage your unit and
will void your manufactures warranty.
Warning:
If after you have replaced the lamp or fuse and you continue to blow
either one, STOP using the unit. Contact customer support for further
instructions, you may have to return the unit for servicing. Continuing
to use the unit may cause serious damage.
Lamp Replacement:
Caution! Never open the unit when in use. Always disconnect the main
power and allow the fixture ample time to cool before attempting to
replace the lamp. All lamps will eventually fade or fail. Replacements
lamps are available from your dealer.
Lamp replacement has been made simple. Again, please remember to
always replace with the exact same type lamp.
1. Be sure to follow the proper procedures when handling halogen
bulbs.
2. Lamp replacement has been made simple.
3. Unscrew the four screws on top (two on each side), and remove
the lamp protector grids.
4. Replace the lamps. Reassemble.
Enferno Cleaning
Enferno Fuse Replacement


Product specificaties

Merk: American Audio
Categorie: Niet gecategoriseerd
Model: Enferno

Heb je hulp nodig?

Als je hulp nodig hebt met American Audio Enferno stel dan hieronder een vraag en andere gebruikers zullen je antwoorden