Aitech 06-080-008-01 Handleiding

Aitech AV extender 06-080-008-01

Lees hieronder de 📖 handleiding in het Nederlandse voor Aitech 06-080-008-01 (4 pagina's) in de categorie AV extender. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

SMARTtv

1. All of the safety, set-up and operating instructions should be read before the

product is operated.

2. The safety and operating instructions should be retained for future reference.

3. All warnings on the product and in the operating instructions should be adhered to.

4. All operating and use instructions should be followed.

5. Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6. Do not use attachments not recommended by the products manufacturer if they

may cause hazards.

7. Do not use this product near water - for example, near a bath tub, wash bowl,

kitchen sink, or laundry tub. Never spill liquid of any kind on this product.

8. Anymountingoftheproductshouldfollowthemanufacturer’sinstructionsand

should use a mounting accessory recommended by the manufacturer.

9. This product should be operated only from the type of power source indicated on

the marking label. If you are not sure of the type or power supply to your home,

consult your product dealer or local Power Company. For products intended to

operate from battery power, or other sources, refer to the operating instructions.

10. Power supply cord should be routed so that they are not likely to be walked on or

pinched by items placed upon or against them.

11. For added protection for this product during a lightning storm, or if it is left

unattended and unused for long periods of time, unplug it from the wall outlet

and disconnect the cable system. This will prevent damage to the product due to

lightning and power line surges.

12. Never push objects of any kind into this product through the openings as they

may touch dangerous voltage points or short-out parts that could result in a fire or

electric shock.

13. Do not overload wall outlets with extension cords or integral convenience

receptacles as this can result in a risk of fire or electric shock.

14. Unplug this product from the wall outlet and refer servicing to qualified services

personnel under the following conditions:

a. When the power supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the products.

c. If the product does not operate normally by following the operation instructions,

adjust only those controls that are covered by the operating manual as an

improper adjustment of other controls may result in damage and will often

require extensive work by a qualified technician to restore this product to its

normal operation.

d. If the products have been dropped or damaged in any way.

e. When the product exhibits a distinct change in performance -- this indicates a

need for service.

15. When replacement parts are required, be sure the service technician has

used replacement parts specified by the manufacturer or that have the same

characteristics as the original part. Unauthorized substitutions may result in fire,

electric shock, or other hazards.

16. Upon completion of any service or repair to this product, ask the service technician

to perform safety checks to determine that the product is in proper operating

condition.

17. The product should be situated from heat sources such as radiators, heat registers,

stoves, or other products including amplifiers that produce heat.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

Changes or modiﬁcations to this unit not expressly approved by the party

responsible for compliance could void the user authority to operate the equipment.

Frequency: 2400MHz~2483MHz

Sender Power: 10dBm

Channels: 4 - 2414,2432,2450,2468MHz

Frequency Stability: +100KHz

Video Input Level: 1 Vp-p

Audio Input Level: 1 Vp-p

Supply Voltage: 9~12V, 700mA or up

Antenna: Flat antenna

Dimension: 5”Dx2”Wx7”5H

Operating Temperature: -10C~+60C

Frequency: 2400MHz~2483MHz

Sensitivity: -90dBm

Channels: 4 - 2414,2432,2450,2468MHz

L.O. Stability: +100KHz

Video Input Level: 1 Vp-p

Audio Input Level: 1 Vp-p

Supply Voltage: 9~12V, 300mA or up

Antenna: Flat antenna

Dimension: 5”Dx2”Wx7”5H

Operating Temperature: -10C~+60C

Congratulations on your purchase of the AITech Wireless Cable TVs System. This

product combines easy set-up, ease of use and convenience for your wireless

cable TVs viewing experience. Whether you need a TV in your kitchen, garage, back

porch or a room without a cable connection, the AITech Wireless Cable TVs system

will provide you with years of Wireless Cable TVs enjoyment.

For assistance using or connecting your AITech Wireless Cable TVs System, visit

http://www.aitech.com/troubleshooting. If you have an immediate need for assistance,

please call and ask for technical support at 408-991-9699.

For an easy and quick set-up of your new AITech product, follow the instructions on

the following pages.

We sincerely hope you enjoy your new AITech Wireless Cable TVs System.

Front view of

transmitter

Rear view of

transmitter

Power Adapter

Unpack your

equipment and

locate your

Power Adapters,

the Transmitter

and your RF

cables.

Place your transmitter to the closest cable drop to the remote TV.

(NOTE: If you plan to also connect your Digital Cable Box, you must locate the

transmitter close to your Digital Box.)

1. Connect your

incoming cable

to the “F” Type

connector on

the rear of the

transmitter marked

“Cable In.”

For Digital Box or

other video device

connection.

2. Connect the 12V power

adapter to your transmitter

and to your 110V wall outlet.

Analog cable TV

signal input

Front view

of Receiver

Rear view of

Receiver

3 3. Turn on the Transmitter by pressing

the power button at the bottom of the

transmitter.

Your

Transmitter

Now

Ready

Unpack your equipment and locate your

Receiver, Power Adapter and Cables.

8 4. After pressing the RF button on the remote to select the cleanest channel,

press SCAN on the remote. The system will now scan all of the available

channels. After scanning is complete, you are ready to watch TV using

your AITech Wireless Cable TVs system.

Receiver

Connect IR Remote

Extender Cable

RCA Cable Connection

Digital Cable TV Box

TV/AV Selector Button IR remote Extender Connector

Composite Input

(Digital Box)

Incoming Cable

from Cable Previder

TV/AV Indicator Light

(When Lit, you are in

“TV” mode)

RF Channel Indicator Light

RF Channel Selector Button

Power Button Power Button

Follow the instructions from title 1 to title 4. After completing the set-up on

title 7 through 11, you are ready for advanced set-up. Advanced set-up is for

those customers that want the added value of being able to watch their digital

channels and controlling the digital box from the remote location.

1. Connect a set of RCA cables from the output of the digital box (from your cable

provider) to the RCA input on the back of the transmitter.

2. Connect the IR extender cable to the rear of the transmitter. Locate the opposite end of

the cable in front of the IR receptor of your digital box.

3. Select the TV/AV button on your remote control. This will switch the coaxial input to

the RCA input. You are now seeing the digital channel.

4. To change the digital channels (all functions of your digital box) use the remote that

came with your digital box. Simply point your digital box remote at the receiver.

The Wireless Cable TVs Systems are designed to be used in applications where more

than one system is needed. There are two different applications and a solution for each.

1. If you have two or more locations where a wireless TV solution is needed and those

locations are not used simultaneously, then all you need is one complete system and

multiple receivers. All receivers will display the same channel.

2. If you have two or more locations where a wireless TV solution is needed and those

locations are used simultaneously, then you will need complete systems to keep all wireless

systems completely independent.

Note: Each system comes with 4 RF channels. When using multiple systems for

independent applications, the systems must be on different RF channels and

in the on screen menu.

Power (Receiver only)

TV/AV (Switch to Digital Box if Connected)

Menu (On Screen Menu)

RF (Select RF Channel)

JUMP (Previous TV Channel)

CH UP (TV Channel Up)

Vol Down

(TV Volume Down)

OK (Conﬁrm Menu Selection)

Menu Selection

(Use in MENU Mode)

Channel Selection

Channel Minus (Delete Channel)

Scan (Scans Available TV Channels)

Fine Tune (Fine Tune TV Channels)

Display (Displays TV Channel and Mode)

Mute

(Mutes TV Volume)

Vol Up (TV Volume Up)

Menu Selection (Use in MENU Mode)

TV Channel Down

Channel Add (Add Channel)

1. Select MENU on the remote

2. Use the CH Down button to move down to the

Synchronization area.

3. Use the small arrow buttons under the Ch Down button to

move the selection.

4. When finished, select OK on the remote.

6 3. Turn on the Receiver by pressing the

power button at bottom of the receiver.

Your

Receiver

is Now Ready

1. Install the batteries into the remote

control.

2. Point the remote at the Receiver and

push the RF button on the remote to

allow the Transmitter and Receiver to

synchronize. (The TX and RX should

now be on the same RF channel)

TV/AV Selector Button

TV/AV Indicator Light

RF Channel Indicator Lights

IR Remote Sensor

RF Channel Selector Button

TV Channel Up

TV Channel Down

TV Volume Up

TV Volume Down

Power Button

Composite Output

to Remote TV

Power Input

1. The Wireless Cable TVs has built in synchronization. If the TX and the RX have not synchronized, the remote control will not

work the Channel function. And pls do above firstly

a) Pull up flexible antenna

b) Used RF splitter. Don't connected to " RF out " ( Because some cable supplier will carrier electrical power inside. This is

another type interfere for us.)

To test for synchronization, set the RF channel on the transmitter and receiver to channel 4. If you connections are correct, you should

see a TV picture

Once you have a picture, point the remote control at the receiver and press the RF button. The RF channel should change to RF 1 and

the Picture should follow. If you lose the picture, they are not synchronized and the remote will not work.

Put the receiver back on RF channel 4 so that you see your picture.

Now, go to the transmitter room and move the transmitter one way or the other. By moving the tranmitter, this allows the receiver try

and synchronize. You may have to change the position of the transmitter several times to gain synchronization. Once you find the right

position for the transmitter, leave it in that position.

If you still have problems getting the remote control to work, try moving the transmitter to a diferent cable drop if available.

1. Make sure both units are on the same RF Channel (1,2,3 or 4)

2. Make sure that if you are using the system in TV mode, that the top light on both units are ON

3. If you connected the remote TV using coaxial cable, make sure your TV is ON and is on Channel 3

4. Make sure you follow the instructions on page 8 of the owners manual when connecting your transmitter to your incoming cable..

Place your receiver close to the remote TV. We have supplied 2 options for

connections to your remote TV; Through the Antenna Connection or through

the Composite video Input. Choose one: DO NOT USE BOTH!

2. Connect the 12V

power adapter to

your transmitter

and to your

110v wall outlet.

RCA Connection Option

Connection to another

display or DVR for record

1. Connect the RCA

cables to the back of the

Receiver and the TV.

Product specificaties

Merk:	Aitech
Categorie:	AV extender
Model:	06-080-008-01
Kleur van het product:	Zwart
Soort:	AV-zender & ontvanger
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Maximum resolutie:	- Pixels
Audiosysteem:	Multikanaal
Composiet video-ingang:	1
Aansluiting voor netstroomadapter:	Ja
Externe adapter:	Ja
Composiet video-uitgang:	1
Draadloze technologie:	2.4GHz RF/IR
Afmetingen (B x D x H):	127 x 50.8 x 178 mm
Maximaal bereik:	30 m