Aiphone IXW-HWCBP Handleiding

Bekijk gratis de handleiding van Aiphone IXW-HWCBP (4 pagina’s), behorend tot de categorie Intercomsysteem. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.3 sterren uit 2 reviews. Heb je een vraag over Aiphone IXW-HWCBP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

IXW-HWCBP

Hand Wave Call Button and Surface Mount Box

IXW-HWCBP includes a touchless switch attached to a mounting plate, a PS-POE, and the SBX-2G/A

surface mount box. This device can be connected to any IX Series door station with a trigger input and a PoE

passthrough. It will place calls to the programmed station without having to touch the call button. The touchless

switch is powered by the PS-POE. The switch’s contact output will trigger a contact input on the door station. The

contact input will need to be programmed and assigned to a calling group. This instruction manual will show how

to connect the IXW-HWCBP to the door station and program the door station for contact input calling.

Wiring

A PoE+ switch is required when using the IXW-HWCBP. Connect a network cable from the PoE+ switch to LAN

1 of the IX Series door station. LAN 2 connects to the included PS-POE. Connect the power output of the

PS-POE to the red (+VDC) and black (Gnd) wires of the touchless switch. Connect the green (N/O) and yellow

(Common) wires of the touchless switch to contact input 1 on the IX Series door station (brown/blue wires on

CN2).

- Instructions -

Specifications

Dimensions: 4-¹³" H x 4-" W x 4" D⁄⁷⁄

Package Contents

Qty 1 Panel with touchless switch

Qty 1 SBX-2G/A

Qty 1 PS-POE

Qty 4 speed nuts for panel mounting

Qty 4 screws for panel mounting

Qty 1 three-foot patch cable

Installation

1. Secure SBX-2G/A to wall

2. Connect included patch cable, power wires, and

a ground wire to PS-POE and place unit

inside the SBX-2G/A

3. Connect included patch cable to LAN 2 of IX

series door station

3. Connect touchless switch to input of IX series

door station and PS-POE

- Green (N.O.) to Brown (CN2 of IX-DV)

- Yellow (Common) to Blue (CN2 of IX-DV)

- White (N.C.) not used

- Red (+VDC) to + of PS-POE

- Black (GND) to - of PS-POE

4. Secure switch panel to SBX-2G/A

Back View

PoE+ Switch

Cat-5e / Cat-6

PS-POE

PoE IN

- +

N.C. (not used)

Red = +VDC

Black =Gnd

,;'9

IX-DV

IXW-HWCBP

If a PoE passthrough is

not available, connect

the PS-POE directly to

the PoE switch

Patch cable supplied

IXW-HWCBP Instr

0321

Aiphone Corporation

www.aiphone.com

[email protected]

800-692-0200

Product specificaties