Aiphone LEM-1DL Handleiding

Aiphone Intercomsysteem LEM-1DL

Lees hieronder de 📖 handleiding in het Nederlandse voor Aiphone LEM-1DL (4 pagina's) in de categorie Intercomsysteem. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

– 1 –

INSTALLATION & OPERATION MANUAL

LEM-1DL ACCESS SENTRY is a convenient 2-station entry control system and can most suitably be used in small ofﬁces,

retailers / mall's back doors, etc.

PRECAUTIONS

WARNING

(Negligence could result in death or serious injury.)

1. Do not dismantle or alter the unit. Fire or electric shock could result.

2. Do not connect any non-speciﬁed power source to the +, - terminals. Also, do not install two power supplies in

parallel to a single input. Fire or damage to the unit could result.

3. Keep the unit away from water or any other liquid. Fire or damage to the unit could result.

4. When existing chime wires are used, it is possible that they contain AC voltage. Electric shock or unit damage

could result. Ask a qualiﬁed technician.

5. Do not use power supply with a voltage other than speciﬁed. Fire or electric shock could result.

6. For power supply, use Aiphone power supply model speciﬁed to use with system. If non-speciﬁed product is

used, ﬁre or malfunction could result.

CAUTION

(Negligence could result in injury or damage to property.)

1. Before turning on the power, make sure wires are not crossed or shorted. Fire or electric shock could result.

2. When mounting the unit on wall, install the unit in a convenient location, but not where it could be jarred or

bumped. Injury could result.

3. Do not install or make any wire terminations while power supply is plugged in. It can cause electrical shock or

damage to the unit.

4. Do not install the unit in any of the following locations. Fire, electric shock, or unit trouble could result.

* Places under direct sunlight, or near heating equipment, boiler that varies in temperature.

* Places subject to dust, oil, chemicals, hydrogen sulﬁde (hot spring).

* Places subject to moisture and humidity extremes, such as bathrooms, cellars, greenhouses, etc.

* Places where the temperature is quite low, such as inside refrigerated area or in front of an air conditioner.

* Places subject to steam or smoke (near heating or cooking surfaces).

* Where noise generating devices such as dimmer switches or inverter electrical appliances are closeby.

* Locations subject to extremely powerful electric ﬁelds.

5. Do not install the unit in a location subject to frequent vibration or impact. It may fall or tip over, resulting in

damage to the unit or personal injury.

GENERAL PRECAUTIONS

1. Keep the unit more than 1 m (3.3') away from Radio or TV sets.

2. In areas where broadcasting station antennas are closeby, the intercom system may be affected by radio

frequency interference.

3. The unit will not work during power failure.

4. All units, except for door stations, are designed for indoor use only. Do not use at outdoor locations.

5. Using a mobile phone or professional-use radio equipment such as walkie-talkie close to the system may cause a

malfunction.

Access Sentry Door Entry Control System

LEM-1DL

1-call master, with door release button

Prohibited Keep unit away from waterDo not dismantle unit Be sure to follow the instructions

– 2 –

System Components

2 Names & Features

FEATURES:

* Convenient door entry control system with DOOR RELEASE button

* AC transformer (PT-1210N) supplies power for both communication and door strike

* Desk-top or wall-mountable master

■ Call tone adjustment

3-position volume switch, located under Operation Plate.

Adjusts call tone volume (Low - Medium - High).

■ Package contents

• LEM-1DL

• Packet of screws

• INSTALLATION &

OPERATION MANUAL

1-call master with

DOOR RELEASE

button

Master station Sub station Door release

EL-12S

AC 12V, 125mA

Power supply

PT-1210N

AC transformer

(North America only)

Or use an equivalent

AC transformer

AC 12V, 10VA.

PS-1225UL

PS-1225S

PS-1225

PS-1215DIN

LE-D

Surface mount

door station

LE-DA　　

Flush mount

door station

LE-A

1-call sub

station

TALK

OFF

VOL.VOICE

TALK

VOL.VOICE

LEM-1DL

TALK button

Operation Plate

Speaker / Microphone

OFF button

(standby)

Voice Volume Control

Door Release ( ) button

HighLow

CALL

3-pos.

call tone vol. switch

(under Operation Plate) LEM-1DL

– 3 –

Mounting

Front Case

Single-gang box

83.5mm,

3-5/16"

Screw (2)

Wall

Lift and pull off

Chassis

Loosen

Push either side

Operation

Plate

83.5mm,

(3-5/16")

Single-gang box

LE-D Unit

Connector

2-gang box

Stainless

Cover

Screw (2)

Main Unit

83.5mm,

(3-5/16")

For surface wall cable run, pass through

opening on top or bottom of back case.

LEM-1DL LE-D

LE-DA

Back wiring LE subs

4 Wiring

–

for AC or DC power supply

for calling & communication

for communication (common)

for door release & its power supply

Normally open dry contact closure

–

EL, EL

}

AC Transformer

PT-1210N

NP PT-1210N

LE-DA

DOOR RELEASE

EL-12S

(AC 12V, 125mA)

LEM-1DL

–

AC Transformer

PT-1210N

NP PT-1210N

LE-DA

DOOR RELEASE

(Max. AC 30V, 1A

Max. DC 30V, 1A)

LEM-1DL

–

Use a suitable power source

locally available.

When EL-12S door release is used;

When door release of OTHER manufacturer is used;

The actual terminal locations are

different from the ones shown in

the diagram below.

NP: Non-polarized

Run separately each cable to

Door station and Door Release.

Product specificaties

Merk:	Aiphone
Categorie:	Intercomsysteem
Model:	LEM-1DL
Kleur van het product:	Black, White
Breedte:	136.5 mm
Diepte:	53.9 mm
Hoogte:	179.3 mm
Connectiviteitstechnologie:	Bedraad
Binnenunit inbegrepen:	Ja
Indoor units hoeveelheid:	1
Stroomtype van binnenunit:	AC/DC